Stand: 21.6.2021, 15:37



Benutzername: Passwort:


aktuelle Anzeige: Publications (peer-review), Eingrenzung: keine, Sortierung nach: Autor - view full database
Autor
Vol
No.
Seiten
 
Zea, L Nisar, Z., Rubin, P., Cortesao, M., Luo, J., McBride, S.A., Moeller, R., Klaus, D., Müller, D., Varanasi, K.K., Mücklich, F., Stodieck, L. „Design of a spaceflight biofilm experiment“ Acta Astronautica 148 2018 148 294-300 DOI: 10.1016/j.actaastro.2018.04.039 published formated output
Z. Liu X. K. Meng, T. Recktenwald, F. Mücklich „Patterned Intermetallics Reaction of Ni3Al by Laser Interference Structuring“ Materials Science & Engineering   2003   101-103   published formated output
Y.H. Chen L. Rogström, J.J. Roa, J.Q. Zhu, I.C. Schramm, L.J.S. Johnson, N. sChell, F. Mücklich, M.J. Anglada, M. Odén „Thermal and mechanical stability of wurtzite-ZrAIN/cubic-TiN and wurzite-ZrAIN/cubic-ZrN multilayers“ Surface and Coatings Technology 324 2017 255     published formated output
Y. Wang J. Ghanbaja, F. Soldera, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Controlling the preferred orientation in sputter-deposited Cu2O thin films: influence of the initial growth stage and homoepitaxial growth mechanism“ Acta Materialia 76 2014   207-212 DOI: 10.1016/j.actamat.2014.05.008 published formated output
Y. Wang J. Ghanbaja, F. Soldera, S. Migot, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Tuning the structure and preferred orientation in reactively sputtered copper oxide thin films“ Applied Surface Science 335 2015   85-91 DOI:10.1016/j.apsusc.2015.02.028 published formated output
Y. Wang J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2016   1732 DOI: 10.1039/c5ce02419f published formated output
Y. Wang J. Ghanbaja, S. Bruyère, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Room temperature self-assembled growth of vertically aligned columnar copper oxide nanocomposite thin films on unmatched substrates“ Scientific Reports 7   2017   1-9 DOI:10.1038/s41598-017-10540-6 published formated output
Y. Wang P. Miska, D. Pilloud, D. Horwat, F. Mücklich, J.F. Pierson „Transmittance enhancement and optial band gab widening of Cu2O thin films after air annealing“ Journal of Apllied Physics 115 2014 255   DOI: 10.1063/1.4865957 published formated output
Y. Wang S. Lany, J. Ghanbaja, Y. Fagot-Revurat, Y.P. Chen, F. Soldera, D. Horwat, F. Mücklich, J.F. Pierson „Electronic structures of Cu2O, Cu4O3, and CuO: A joint experimental and theoretical study“ Physical Review B 94 2016 255   DOI: 10.1103/PhysRevB.94.245418 published formated output
Y. Wang J. Ghanbaja, F. Soldera, P. Boulet, D. Horwat, F. Mücklich, J.-F. Pierson „Local Homoepitaxial Growth in Sputtered NiO Thin Films: An Effective Approach to Tune the Crystallization, Preferred Growth Orientation, and Electrical Properties“ Phys. Status Solidi, RRL 12 2018     DOI: 10.1002/pssr.201800191 published formated output
Y. Motemani D. Khare, A. Savan, M. Hans, A. Paulsen, J. Franzel, C. Somsen, F. Mücklich, G. Eggeler, A. Ludwig „Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition“ Nanotechnology 27 2016   495604   published formated output
Y. Hao F. Mücklich, G. Petzow „Investigation of the Dislocation Structure in hcp Single Crystals by Means of the Rocking Crystal Method“ Acta Metallurgica Sinica 33 1997 2 198-206   published formated output
Y. Hao F. Mücklich, G. Petzow „Correlation between the Dislocation Configuration and the Related Scattering Behaviour of hcp Single Crystals by Application of the Fourier Transformation Approach“ Computational Materials Science 7 1996   167-172   published formated output
Y. Hao F. Mücklich, G. Petzow „Correlation between Scattering Behaviour of H.C.P. Single Crystals and Incorporated Dislocation Arrangement Quantified by the Fourier Transformation“ Physica Status Solidi A 158 1996 9 9-17   published formated output
Y. Gaillard E. Jiménez-Piqué, F. Soldera, F. Mücklich, M. Anglada „Quantification of Hydrothermal Degradation in Zirconia by Nanoindentation“ Acta Materialia 56 2008 16 4206-4216 DOI: 10.1016/j.actamat.2008.04.050 | PDF verfügbar published formated output
Y. Battie A. En Naciri, W. Chamorro, D. Horwat „Generalized Effective Medium Theory to Extract the Optical Properties of Two-Dimensional Nonspherical Metallic Nanoparticle Layers“ The Journal of Physical Chemistry C 118 2014 9 4899–4905 DOI: 10.1021/jp4119343 published formated output
W. Chamorro J. Ghanbaja, Y. Battie, A. en Naciri, F. Soldera, F. Mücklich, D. Horwat „Local Structure-Driven Localized Surface Plasmon Absorption and Enhanced Photoluminescence in ZnO-Au thin Films“ Journal of Physical Chemistry   2016       accepted formated output
W. Chamorro D. Horwat, P. Pigeat, P. Miska, S. Migot, F. Soldera, P. Boulet, F. Mücklich „Near-room temperature single-domain epitaxy of reactively sputtered ZnO films“ Journal of Physics D: Applied Physics 46 2013 255 1-7 DOI: 10.1088/0022-3727/46/23/235107 | PDF verfügbar published formated output
V. Sivakov C. Petersen, C. Daniel, H. Shen, F. Mücklich, S. Mathur „Laser Induced Local and Periodic Phase Transformation in Iron Oxide Thin Films Obtained by Chemical Vapour Deposition“ Applied Surface Science 247 2005   513-517 DOI: 10.1016/j.apsusc.2005.01.088 | PDF verfügbar published formated output
U. Scholz D. Plachke, W. Yuan, H.-J. Carstanjen, F. Mücklich, G. Petzow „On the Influence of Impurities in Beryllium Single Crystal Growth“ Journal of Crystal Growth 169 1996   575-577   published formated output
U. Scholz Z. S. Nikolic, F. Mücklich, G. Petzow „Determination and Modification of the Thermal Conditions in a Double Ellipsoid Mirror Furnace“ Journal of Crystal Growth 169 1996   578-581   published formated output
T. Recktenwald F. Mücklich „A Periodic Modification of Polymer Surfaces by Laser Interference Structuring“ Practical Metallography 40 2003   614-636   published formated output
T. Recktenwald Z. Liu, T. Laurent, F. Mücklich „A Quantitative Characterization of Periodic Microstructures on Surfaces Induced by Laser Interference“ Practical Metallography 40 2003 6 287-300   published formated output
T. Prill D. Jeulin, F. Willot, J. Balach, F. Soldera „Prediction of Effective Properties of Porous Carbon Electrodes from a Parametric 3D Random Morphological Model“ Transport in Porous Media 120 2017 1 120-141 https://doi.org/10.1007/s11242-017-0913-1 published formated output
T. Magenreuter A. Velichko, F. Mücklich „Abhängigkeit der formcharakteristischen Parameter Rundheit und Kompaktheit verschiedener Graphitmorphologien von der Vergrößerung“ Practical Metallography 2 2008   53-71   published formated output
T. MacLucas S. Schütz, S. Suarez, F.Muecklich „Surface protection of austenitic steels by carbon nanotube coatings“ Surface Topography   2017       submitted formated output
T. Kaiser W. Sigle, D. Goll, N. H. Goo, V. Srot, P. A. van Aken, E. Detemple, W. Jäger „Transmission Electron Microscopy Study of the Intermixing of Fe--Pt Multilayers“ Journal of Applied Physics 103 2008 6 063913-1-063913-6 DOI: 10.1063/1.2884347 published formated output
T. Jung L. Kreiner, C. Pauly, F. Mücklich, A.M. Edmonds, M. Markham, C. Becher „Reproducible fabrication and characterization of diamond membranes for photonic crystal cavities“ Physica Status Soldi (a) 213 2016 12 3254-3264   published formated output
T. Gries R. Catrin, S. Migot, F. Soldera, J.-L. Endrino, A. R. Landa-Canovas, F. Cleymand, D. Mangin, F. Mücklich, D. Horwat „Local Modification of the Microstructure and Electrical Properties of Multifunctional Au–YSZ Nanocomposite Thin Films by Laser Interference Patterning“ Applied Material Interfaces 6 2014 16 13707–13715 DOI: 10.1021/am503160w published formated output
T. Dahmen M. Engstler, C. Pauly, P. Trampert, N. de Jonge, F. Mücklich, P. Slusallek „Feature Adaptive Sampling for Scanning Electron Microscopy“ Scientific Reports Nature Publishing Group   2016     DOI: 10.1038/srep25350 published formated output
T. Dahmen N. de Jonge, P. Trampert, M. Engstler, C. Pauly, F. Mücklich, P. Slusallek „"Smart Microscopy" Feature based adaptive ampling for Forcused Ion Beam Scanning Electron Microscopy“ Microscopy and Microanalysis 22 2016   632   published formated output
S.M. Azimi D. Britz, M. Engstler, M. Fritz, F. Mücklich „Advanced Steel Microstructural Classification by Deep Learning Methods“ Scientific Reports 8 2018 1 2128   published formated output
S.A. Brinkmann M. Frensemeier, C.M. Laursen, H.J. Maier, D.Britz, A.S. Schneider, F. Mücklich, C.P. Frick „Effect of Indentation Temperature on Nickel-Titanium Indentation-Induced Two-Way Shape-Memory Surfaces“ Materials Science & Engineering A   2016     doi: http://dx.doi.org/10.1016/j.msea.2016.08.036 accepted formated output
S.-M. Liang M. Engstler, V. Groten, J. Barrirero, F. Mücklich, A. Bührig-Polaczek, R. Schmid-Fetzer „Key experiments and thermodynamic revision of the binary Al–Sr system“ Journal of Alloys and Compounds 610 2014   443-450 DOI: 10.1016/j.jallcom.2014.05.018 published formated output
S. Weyand D. Britz, D. Rupp, F. Mücklich „Investigation of Austenite Evolution in Low Carbon Steel by Combining Thermo-Mechanical Simulation and EBSD-Data“ ASTM International Journal on Materials Performance and Characterization, Special Issue: Acceleration of Alloy Design via Physical Process Simulation 4 2015 3 322-340   published formated output
S. Suarez F. Soldera, C. G. Oliver, D. Acevedo, F. Mücklich „Thermomechanical behavior of Bulk Ni/MWNT Composites Produced via Powder Metallurgy“ Advanced Engineering Materials 7 2012 14 499-502 DOI: 10.1002/adem.201200100 | PDF verfügbar published formated output
S. Suarez E. Ramos-Moore, F. Mücklich „A high temperature X-ray diffraction study of the influence of MWCNTs on the thermal expansion of MWCNT/Ni composites“ Carbon 51 2013   404-409 DOI: 10.1016/j.carbon.2012.09.002 | PDF verfügbar published formated output
S. Suarez F. Lasserre, F. Mücklich „Mechanical properties of MWNT/Ni bulk composites: Influence of the microstructural refinement on the hardness“ Materials Science & Engineering A 587 2013   381-386 DOI: 10.1016/j.msea.2013.08.058 | PDF verfügbar published formated output
S. Suarez A. Rosenkranz, C. Gachot, F. Mücklich „Enhanced tribological properties of MWCNT/Ni bulk composites – Influence of processing on friction and wear behaviour“ Carbon 66 2014   164-171 DOI: 10.1016/j.carbon.2013.08.054 | PDF verfügbar published formated output
S. Suarez E. Ramos-Moore, B. Lechthaler, F. Mücklich „Grain growth analysis of multiwalled carbon nanotube-reinforced bulk Ni composites“ Carbon 70 2014   173-178 DOI: 10.1016/j.carbon.2013.12.089 | PDF verfügbar published formated output
S. Suarez F. Lasserre, O. Prat, F. Mücklich „Processing and interfacial reaction evaluation in MWCNT/Ni composites“ physica status solidi (a) 211 2014 7 1555–1561 DOI: 10.1002/pssa.201431018 published formated output
S. Suárez F. Lasserre, F. Soldera, R. Pippan, F. Mücklich „Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation“ Materials Science and Engineering: A 626 2015   122-127 DOI: 10.1016/j.msea.2014.12.065 published formated output
S. Suarez N. Souza, F. Lasserre, F. Mücklich „Influence of the reinforcement distribution and interface on the electronic transport properties of MWCNT-reinforced metal matrix composites“ Advanced Engineering Materials 18 2016 9 1626 -1633 DOI:10.1002/adem.201600216 published formated output
S. Suarez L. Reinert, F. Mücklich „Carbon Nanotube (CNT)-Reinforced Metal Matrix Bulk Composites: Manufacturing and Evaluation“ Diamond and Carbon Composites and Nanocomposites   2016       published formated output
S. Stanojevic I. Gallino, H. Aboulfadl, M. Sahin, F. Mücklich, R. Busch „Oxidation of glassy Ni–Nb–Sn alloys and its influence on the thermodynamics and kinetics of crystallization“ Acta Materialia 102 2016   176-186   published formated output
S. P. Harimkar C. Daniel, C. Holzapfel, P. Leibenguth, F. Mücklich, N. B. Dahotre „Validation of Crystallographic Correlation for Faceted Morphology in Laser Surface Engineered Alumina Ceramic“ Scripta Materialia 57 2007   401-404   published formated output
S. Mathews M. Hans, F. Mücklich, M. Solioz „Contact Killing of Bacteria on Copper Is Suppressed if Bacterial-Metal Contact Is Prevented and Is Induced on Iron by Copper Ions“ Applied and Environmental Microbiology 79 2013 8 2605-2611 DOI: 10.1128/AEM.03608-12 | PDF verfügbar published formated output
S. Getlawi M. Theis, S. Friedrich, A. Koblischka-Veneva, M. R. Koblischka, M. Saumer, U. Hartmann „Characterization of Electroplated, Thick Permalloy Films“ Physica Status Solidi A 205 2008 255   DOI: 10.1002/pssa.200723621; presented at the 3rd Seeheim conference on magnetism, Frankfurt, Germany, 26.8.-30.8.2007 | PDF verfügbar published formated output
S. Getlawi M. R. Koblischka, F. Soldera, U. Hartmann „Structuring of Permalloy by means of Electron-beam Lithography and Focused Ion Beam Milling“ Microscopy and Microanalysis 13 2007 3 358-359 DOI: 10.1017/S1431927607081792 | PDF verfügbar published formated output
S. Fang, T. Herrmann, A. Rosenkranz, C. Gachot, F.G. Marro, F. Mücklich, L. Llanes, D. Bähre „Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts“ Procedia CIRP   2016   439-443   published formated output
S. Fang A. Rosenkranz, F.G. Marro, C. Gachot, L.Llanes, D. Bähre, F. Mücklich „Surface Modification of Cemented Tungsten Carbide (Wc-Co) by Ultra-Short Pulse Laser Processing and its Tribological Properties“ 7th International Conference on Tribology in Manufacturing Processes   2016       accepted formated output
S. Fang T. Herrmannc, A. Rosenkranz, C. Gachot, F.G. Marro, F. Mücklich, L. Llanes, D. Bähre „Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts“ Procedia CIRP   2016   439-443 DOI:10.1016/j.procir.2016.02.228 published formated output
S. Fang L. Llanes, M. Engstler, D. Bähre, F. Soldera, F. Mücklich „Surface Topography Quantification of Super Hard Abrasive Tools by Laser Scanning Microscopy“ Materials Performance and Characterization 5 2016 5 796-815   published formated output
S. Fang L. Llanes, D. Bähre, F. Mücklich „3D characterization of cubic boron nitride (CBN) composites used as tool material for high precision abrasive machining processes“ Ceramics International 43 2017 17 14693-14700   published formated output
S. Fang L. Llanes, S. Klein, C. Gachot, A. Rosenkranz, D. Bähre, F. Mücklich „Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser“ IOP Conference Series: Materials Sience and Engineering 258 2017   1-6 DOI: 10.1088/1757-899X/258/1/012006 published formated output
S. Fang C.-J. Hsu, S. Klein, L. Llanes, D. Bähre, F. Mücklich „Influence of Laser Pulse Number on the Ablation of Cemented Tungsten Carbides (WC-CoNi) with Different Grain Size“ Lubricants 6 2018     doi:10.3390/lubricants6010011 published formated output
S. Fang F. Soldera, A. Rosenkranz, T. Herrmann, D. Bähre, L. Llanes, F. Mücklich „Microstructural and Metallurgical Assessment of the Laser-Patterned Cemented Tungsten Carbide (WC-CoNi)“ Procedia Manufacturing 26 2018   198-204 doi: 10.1016/j.promfg.2018.07.027 published formated output
S. Bettscheider C. Gachot, A. Rosenkranz „How to measure the real contact area? A simple marker and relocation foot-printing approach“ Tribology International   2016     Accepted in Tribology International 26.06.2016 accepted formated output
S. Bettscheider P.G. Grützmacher, A. Rosenkranz „Low friction and high solid-solid contactratio - a contradiction for laser-patterened surfaces?“ Lubricants 5 2017 35   doi:10.3390/lubricants5030035 published formated output
S. Bagherifard S. Slawik, I. Fernández-Pariente, C. Pauly, F. Mücklich, M. Guagliano „Nanoscale surface modification of AISI 316L stainless steel by severe shot peening“ Materials & Design 102 2016   68-77 doi:10.1016/j.matdes.2016.03.162 published formated output
Rossi, P. Engstler, M., Mücklich, F. „Homogeneity Quantification Method and its Application to Microstructure Assessment“ Practical Metalography 51 2014   180-199   published formated output
Rossi, P. Engstler, M., Mücklich, F. „Quantitative Classification and Assessment of Sr Modification in Hypoeutectic Al-Si and Al-Si-Mg Alloys“ Practical Metallography 52 2015 10 571-589 doi: 10.3139/147.110361 published formated output
R. Szamocki A. Velichko, C. Holzapfel, F. Mücklich, S. Ravaine, P. Garrigues, N. Sojic, R. Hempelmann, A. Kuhn „Macroporous Ultramicroelectrodes for Improved Electroanalytical Measurements“ Analytical Chemistry 79 2007 2 533-539   published formated output
R. Szamocki A. Velichko, F. Mücklich, S. Reculusa, S. Ravaine, S. Neugebauer, W. Schuhmann, R. Hempelmann, A. Kuhn „Improved enzyme immobilization for enhanced bioelectrocatalytic activity of porous electrodes“ Electrochemistry Communications 9 2007 8 2121-2127   published formated output
R. Schieber F. Lasserre, M. Hans, M. Fernández-Yagüe, M. Diaz-Ricart, G. Escolar, M. Ginebra, F. Mücklich, M. Pegueroles „Direct Laser Interference Patterning of CoCr Alloy Surfaces to Control Endothelial Cell and Platelet Response for Cardiovascular Applications“ Advanced Health Care Materials   2017     DOI: 10.1002/adhm.201700327 published formated output
R. Puyol S. Suarez „A Contact Resistance Measurement Setzup fot the Study of Novel Contacts“ In: IEEE URUCON, IEEE   2017   3-6   published formated output
R. Hermann H. Vinzelberg, G. Behr, K. Woll, F. Mücklich, B. Büchner „Magnetic Field Controlled Floating-Zone Crystal Growth and Properties of RuAl Single Crystal“ Journal of Crystal Growth 310 2008   4286-4289 DOI: 10.1016/j.jcrysgro.2008.06.082 | PDF verfügbar published formated output
R. Gago F. Soldera, R. Hübner, J. Lehmann, F. Munnik, L. Vázquez, A. Redondo-Cubero, J.L. Endrino „X-ray absorption near-edge structure of hexagonal ternary phases in sputter-deposited TiAlN films“ Journal of Alloys and Compounds 561 2013   87-94 DOI: 10.1016/j.jallcom.2013.01.130 | PDF verfügbar published formated output
R. Forsén I. C. Schramm, P. O. Å. Persson, F. Mücklich, M. Odén, N. Ghafoor „Nanostructuring and coherency strain in multicomponent hard coatings“ APL Materials 2 2014     DOI: 10.1063/1.4901125 published formated output
R. Catrin A. Lasagni, C. Gachot, U. Schmid und F. Mücklich „Microstructural Design of Advanced Architectures in Titanium/Platinum Thin Films by Laser Interference Metallurgy“ Advanced Engineering Materials 10 2008 5 466-470 DOI:10.1002/adem.200700328 | PDF verfügbar published formated output
R. Catrin C. Gachot, G. Marchand, U. Schmid, F. Mücklich „Selective Wet Chemical Etching of Metallic Thin Films Designed by Laser Interference Metallurgy (LIMET)“ SPIE Proceedings 7362 2009   736217-1-6 Conference proceeding: SPIE Europe Microtechnologies for the New Millennium (Dresden, 4-6 Mai 09) | DOI:10.1117/12.821333 | PDF verfügbar published formated output
R. Catrin D. Horwat, J.-F. Pierson, S. Migot, Y. Hu, F. Mücklich „Nano-Scale and Surface Precipitation of Metallic Particles in Laser Interference Patterned Noble Metal Oxide Thin Films“ Applied Surface Science 257 2011 12 5223-5229 DOI:10.1016/j.apsusc.2010.11.060 | PDF verfügbar published formated output
R. Catrin T. Gries, D. Horwat, S. Migot, F. Mücklich „Microstructure of Sputter-deposited Noble Metal-Incorporated Oxide Thin Films Patterned by Means of Laser Interference“ Proceedings of the Materials Research Society 1339 2011     DOI: 10.1557/opl.2011.861 published formated output
R. Catrin D. Horwat, T. Gries, B. Raillard, S. Migot, F. Mücklich „Influence of Laser Interference Patterning on Microstructure and Friction Behaviour of Gold/Yttria-Stabilized Zirconia Nanocomposite Thin Films“ Journal of Materials Research 27 2012 6 879-885 DOI:10.1557/opl.2011.861. | PDF verfügbar published formated output
R. Albrecht A. Bommer, C. Pauly, F. Mücklich, A. W. Schell, P. Engel, T. Schröder, O. Benson, J. Reichel, C. Becher „Narrow-band single photon emission at room temperature based on a single nitrogen-vacancy center coupled to an all-fiber-cavity“ Applied Physics Letters 105 2014 7 73113 DOI: 10.1063/1.4893612 published formated output
P.K. Yalamanchili F. Wang, I. Schramm, J.M. Andersson, M.P.J. Joesaar, F. Tasnádi, F. Mücklich, N. Ghafoor, M. Odén „Exploring the high entropy alloy concept in (AlTiVNbCr)N“ Thin Solid Films 636 2017   346-352   published formated output
P.G. Grützmacher A. Rosenkranz, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich „Effects of Multi-Scale Patterning on the Run-In Behavior of Steel-Alumina Pairings under Lubricated Conditions“ Advanced Engineering Materials   2017 255   DOI: 10.1002/adem.201700521 published formated output
P.G. Grützmacher A. Rosenkranz, S. Rammacher, C. Gachot, F. Mücklich „The influence of centrifugal forces on friction and wear in rotational sliding“ Tribology International 116 2017   256-263 DOI: 10.1016/tribol.2017.07.021 published formated output
P. Rossi S. Suarez, F. Soldera, F. Mücklich „Quantitative Assessment of the Reinforcement Distribution Homogeneity in CNT/Metal Composites“ Advanced Engineering Materials 17 2015 7 1017-1021 DOI: 10.1002/adem.201400352 published formated output
P. Li U. Bakowsky, F. Yu, C. Loehbach, F. Mücklich, C. M. Lehr „Laser Ablation Patterning by Interference Induces Directional Cell Growth“ IEEE Transactions on Nanobioscience 2 2003 9 138-145   published formated output
P. Grützmacher A. Rosenkranz, C. Gachot „How to Guide Lubricants - Tailored Laser Surface Patterns on Stainless Steel“ Applied Surface Science 370 2016   59-66 DOI: 10.1016/j.apsusc.2016.02.115 published formated output
P. Grützmacher A. Rosenkranz, A. Szurdak, F. König, G. Jacobs, G. Hirt, F. Mücklich „From lab to application - Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns“ Tribology International 127 2018   500-508   published formated output
P. Ferrari E. Ramos-Moore, M.A. Guitar, A.L. Cabrera „Raman analysis of ferroelectric switching in niobium-doped lead zirconate titanate thin films“ Thin Solid Films 556 2014   539-543 DOI: 10.1016/j.tsf.2014.02.050 published formated output
P. Domenichini A.M. Condó, F. Soldera, M.Sirena, N. Haberkorn „Influence of the microstructure on the resulting 18R martensitic transformation of polycrystalline Cu-Al-ZN thin films obtained by sputtering and reactive annealing“ Materials Characterization 114 2016   289-295 DOI: 10.1016/j.matchar.2016.03.008 accepted formated output
N. Zotov K. Woll, F. Mücklich „Phase Formation of B2-RuAl during Annealing of Ru/Al Multilayers“ Intermetallics 18 2010 8 1507-1516 DOI:10.1016/j.intermet.2010.04.001| PDF verfügbar published formated output
N. Souza F Lasserre, A Blickley, M Zeiger, S Suarez, M Duarte, V Presser, F Mücklich „Upcycling spent petroleum cracking catalyst: pulsed laser deposition of single-wall carbon nanotubes and silica nanowires“ RSC Advances 6 2016   72596 - 72606 DOI: 10.1039/C6RA15479D published formated output
N. Souza M. Zeiger, V. Presser, F. Mücklich „In situ tracking of defect healing and purification of single-wall carbon nanotubes with laser radiation by time-resolved Raman spectroscopy“ RSC Advances 5 2015 76 62149 - 62159 doi:10.1039/C5RA09316C published formated output
N. Souza M. Roble, D. E. Diaz-Droguett, F. Mücklich „Scaling up single-wall carbon nanotube laser annealing: effect on electrical resistance and hydrogen adsorption“ RSC Advances 7 2017 9 5084 - 5092 doi:10.1039/C6RA27794B published formated output
N. Shulumba O. Hellman, Z. Raza, B. Alling, J. Barrirero, F. Mücklich, I.A. Abrikosov, M. Odén „Lattice Vibrations Change the Solid Soubility of an Alloy at High Temperatures“ Phy. Rev. Lett. 117 2016   205502   published formated output
N. Prodanov C. Gachot, A. Rosenkranz, F. Mücklich, M.H. Müser „Contact mechanics of laser-textured surfaces: Correlating contact area and friction“ Tribology Letters 50 2013   41-48 DOI: 10.1007/s11249-012-0064-z published formated output
N. Jeanvoine C. Holzapfel, F. Soldera, F. Mücklich „3D-Investigations of Plasma Erosion Craters using FIB/SEM Dual-Beam Techniques“ Practical Metallography 43 2006 3 107-119   published formated output
N. Jeanvoine C. Selzner, F. Soldera, F. Mücklich „In Situ FIB-Surface Preparation of Ag/SnO Composites for EBSD Measurements“ Microscopy und Microanalysis 13 2007 2 1532-1533 DOI: 10.1017/S1431927607076246 | PDF verfügbar published formated output
N. Jeanvoine C. Holzapfel, F. Soldera, F. Mücklich „Microstructure Characterisation of Electrical Discharge Craters using FIB/SEM Dual Beam Techniques“ Advanced Engineering Materials 10 2008 10 973-977 DOI: 10.1002/adem.200800108 | PDF verfügbar published formated output
N. Jeanvoine F. Mücklich „FEM Simulation of the Temperature Distribution and Power Density at Platinum Cathode Craters Caused by High Voltage Ignition Discharges“ Journal of Physics D: Applied Physics 42 2009   035203 DOI: 10.1088/0022-3727/42/3/035203 | PDF verfügbar published formated output
N. Jeanvoine A. Velichko, C. Selzner, F. Mücklich „Nanotomography of Electrical Contacts – New Insights by High Resolution 3D Analysis of Local Material Degradation“ European Physical Journal: Applied Physics 49 2008 255 1-6 DOI: 10.1051/epjap/2009210 | PDF verfügbar published formated output
N. Jeanvoine C. Holzapfel, F. Soldera, F. Mücklich „3D Investigations of Plasma Erosion Craters using FIB/SEM Dual- Beam Techniques“ Practical Metallography 43 2006 9 470-482 PDF verfügbar published formated output
N. Ilic F. Soldera, F. Mücklich, M. T. Jovanovic „Oxidation Behavior of Ru(Al)-RuAl Intermetallic Eutectics Produced by Ingot and Powder Metallurgy“ Intermetallics 13 2005 5 444-453 DOI: 10.1016/j.intermet.2004.06.010 | PDF verfügbar published formated output
N. Ilic F. Mücklich „RuAl and its Alloys: Part I – Structure, Physical Properties, Microstructure and Processing“ Intermetallics 13 2005   5-21 DOI: 10.1016/j.intermet.2004.05.005 | PDF verfügbar published formated output
N. Ilic R. Rein, M. Göken, M. Kempf, F. Soldera, F. Mücklich „Properties of Eutectic Ru-Al Alloy Produced by Ingot Metallurgy“ Materials Science and Engineering A   2002   38-44 PDF verfügbar published formated output
N. Haberkorn A.M. Condó, M. Sirena, F. Soldera, F.C. Lovey „Single crystalline β phase Cu–Zn nanowires: Synthesis and martensitic transformation“ Materials Letters 124 2014   256–260 DOI: 10.1016/j.matlet.2014.03.101 published formated output
Mücklich, F. Engstler, M., Britz, D., Barrirero, J., Rossi, P. „Why We Need All Dimensions to Solve Both Very Old and Very New Questions in Materials at the Micro-, Nano- and Atomic Scales“ Practical Metallography 52 2015 9 507-524 doi: 10.3139/147.110360 published formated output
M.J. Morán A.M. Condó, F. Soldera, M. Sirena, N. Haberkorn „Martensitic transformation in freestanding and supported Cu–Al–Ni thin films obtained at low deposition temperatures“ Materials Letters 184 2016   177-180 http://dx.doi.org/10.1016/j.matlet.2016.08.027 published formated output
M.F. Broglia S. Suarez, F. Soldera, F. Mücklich, C.A. Barbero, R. Bellingeri, F. Alustiza, D. Acevedo „Direct laser interference patterning of polystyrene films doped with azo dyes, using 355 nm laser light“ Applied Surface Science 300 2014   86–90 DOI: 10.1016/j.apsusc.2014.02.008 published formated output
M.A. Guitar K. Woll, E. Ramos-Moore, F. Mücklich „Study of grain growth and thermal stability of nanocrystalline RuAl thin films deposited by magnetron sputtering“ Thin Solid Films 527 2013   1-8 DOI: 10.1016/j.tsf.2012.12.046 | PDF verfügbar published formated output
M.A. Guitar F. Mücklich „Isothermal Oxidation Behaviour of Nanocrystalline RuAl Intermetallic Thin Films“ Oxidation of Metals 80 2013 80 423-436 DOI 10.1007/s11085-013-9409-8 | PDF verfügbar published formated output
M.A. Guitar E. Ramos-Moore, F. Mücklich „The influence of impurities on the formation of protective aluminium oxides on RuAl thin films“ Journal of Alloys and Compounds 594 2014   165-170 DOI: 10.1016/j.jallcom.2014.01.137 published formated output
M.A. Guitar H. Aboulfadl, C. Pauly, P. Leibenguth, S. Migot, F. Mücklich „Production of single-phase intermetallic films from Ru-Al multilayers“ Surface and Coatings Technology 244 2014   210-216 DOI: 10.1016/j.surfcoat.2014.02.022 published formated output
M. Winter M. R. Koblischka, A. Koblischka-Veneva, U. Hartmann „Nanostripe Structures in Light Rare Earth High Tc-Superconductors“ Journal of Physics: Conference Series 61 2007   601-605 presented at. ICN+T Conf., Basel, Switzerland, 2006 published formated output
M. Veith K. Andres, C. Petersen, C. Daniel, C. Holzapfel, F. Mücklich „Periodical Micro-Structuring of Hydride Containing Metastable Aluminiumoxide Using Laser Interference Metallurgy“ Advanced Engineering Materials 7 2005 1 27-30 DOI: 10.1002/adem.200400152 | PDF verfügbar published formated output
M. Seyler C. Selzner, C. Holzapfel, F. Mücklich, W. F. Maier „Influence of Laser-induced Topography Changes on the Activity of Catalyst Coatings, Examined by Infrared Thermography“ Advanced Functional Materials 18 2008 8 1178 - 1185 DOI: 10.1002/adfm.200700770 | PDF verfügbar published formated output
M. R. S. Castro A. Lasagni, H. K. Schmidt, F. Mücklich „Direct Laser Interference Patterning of Multi-Walled Carbon Nanotube-based Transparent Conductive Coatings“ Applied Surface Science 254 2008 18 5874-5878 DOI: 10.1016/j.apsusc.2008.03.140 | PDF verfügbar published formated output
M. R. Koblischka, M. Winter, A. Koblischka-Veneva, U. Hartmann „Nanoscale Flux Pinning Sites in High-Tc Superconductors“ International Journal of Condensed Matter, Advanced Materials and Superconductivity Research 6 2008   199-217   published formated output
M. R. Koblischka A. Koblischka-Veneva, E.S. Reddy, G. J. Schmitz, K. Ogasawara, M. Murakami „Orientations of Y2BaCuO5 and YBCO within Melt-textured and Directional Solidified Samples Studied by EBSD“ Physica C 392 2003   589-595   published formated output
M. R. Koblischka M. Winter, U. Hartmann, A. Koblischka-Veneva, N. Hari Babu, D. A. Cardwell „Analysis of Melt-textured YBCO with Nanoscale Inclusions“ Journal of Physics: Conference Series 43 2006   522-526 DOI: 10.1088/1742-6596/43/1/129 | PDF verfügbar published formated output
M. R. Koblischka M. Winter, A. Koblischka-Veneva, M. Muralidhar, F. Mücklich, U. Hartmann „Nanostripes in (Nd0.33Eu0.33Gd0.33)Ba2Cu3Ox superconductors“ Applied Physics Letters 91 2007   082508   published formated output
M. R. Koblischka A. Koblischka-Veneva, P. Das, T. Wolf, F. Mücklich, U. Hartmann „Nanostripes in (Nd,Eu,Gd)Ba2Cu3Ox (NEG) Single Crystals“ Microscopy and Microanalysis 13 2007 3 356-357 presented at MC2007, 2.-7.9.2007, Saarbrücken, Germany published formated output
M. R. Koblischka M. Kirsch, M. Brust, A. Koblischka-Veneva, U. Hartmann „Preparation of Thin Ferrite Films on Silicon Substrates“ Physica Status Solidi A 205 2008   1783-1786 presented at the 3rd Seeheim conference on magnetism, Frankfurt, Germany, 26.8.-30.8.2007 published formated output
M. R. Koblischka M. Winter, P. Das, U. Hartmann, A. Koblischka-Veneva, F. Mücklich „Nanostripes in GdBa2Cu3Ox High-Tc Superconductors“ Materials Science and Engineering B 151 2008   74-78 DOI: 10.1016/j.mseb.2008.02.010 | PDF verfügbar published formated output
M. R. Koblischka A. Koblischka-Veneva „Investigation of Bulk, Melt-textured Superconductors on the Nanoscale“ Materials Science and Engineering B 151 2008   47-52 presented at 6th PASREG 2007, Cambridge, U.K., 13.9.-15.9.2007 published formated output
M. Ohligschläger F. Mücklich „Untersuchungen zur Quantifizierung von Dendritenstrukturen in Gußwerkstoffen mit Hilfe der Hough-Transformation und der Autokorrelationsfunktion“ Practical Metallography 30 1999   401-409   published formated output
M. Maurer F. Mücklich „Quantifizierung von lokalem Materialabtrag durch Lichtbogenerosion mittels Weißlichtinterferometrie“ Practical Metallography 30 1999   287-292   published formated output
M. Marx W. Schäf, H. Vehoff, C. Holzapfel „Interaction of Microcracks with Selected Interfaces: Focused Ion Beam for a Systematic Crack Initiation“ Materials Science and Engineering A 435-436 2006   595-601 DOI: 10.1016/j.msea.2006.07.042 | PDF verfügbar published formated output
M. Martinez Mirò M. Veith, J. Lee, F. Soldera, F. Mücklich, R. Bennewitz, C. Aktas „3D and 2D structural characterization of 1D Al/Al2O3 biphasic nanostructures“ Journal of Microscopy 258 2015 2 113-118 DOI: 10.1111/jmi.12221 published formated output
M. Maril P. Tobosque, J. Nunez, C.A. Rodriguez, M.P. Delplancke, J. L. Delplancke, M. Yacaman, M.Josefina Arellano-Jimenez, F. Soldera, C. Carrasco „Synthesis and structural analysis of electrodeposited Pb-Co films for oxygen evolution applications“ Materials Characterization 148 2019   323-329 DOI: 10.1016/j.matchar.2018.12.031 published formated output
M. Linz H. Winkelmann, K. Hradil, E. Badisch, F. Mücklich „Directional development of residual stress and surface fatigue during sliding contact“ Engineering Failure Analysis 35 2013   678-685 DOI: 10.1016/j.engfailanal.2013.06.011| PDF verfügbar published formated output
M. Linz M. Rodriguez Ripoll, C. Pauly, J. Bernardi, A. Steiger-Thirsfeld, F. Franek, F. Mücklich, C. Gachot „Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic-Pearlitik Steel durin Lubricated Sliding“ Advanced Engineering Materials   2018       published formated output
M. Linz M.R. Ripoll, C. Gachot, C .Pauly, F. Franek, F. Mücklich „On the competition between plastic deformation and material detachment in ferritic/pearlitic steel under boundary lubrication“ Wear 376 2017   813-821   published formated output
M. Hans C. Gachot, F. Müller, F. Mücklich „Direct Laser Interference Structuring as a Tool to Gradually Tune the Wetting Response of Titanium and Polyimide Surfaces“ Advanced Engineering Materials 11 2009 10 795-800 DOI:10.1002/adem.200900115 | PDF verfügbar published formated output
M. Hans C. Gachot, R. Catrin, B. Raillard, F. Mücklich „Laserinterferenzstrukturierung zur Funktionalsisierung von Kupferwerkstoffen“ Metall 63 2009 11 579-581   published formated output
M. Hans F. Müller, S. Grandthyll, S. Hüfner, F. Mücklich „Anisotropic wetting of copper alloys induced by one-step laser micro-patterning“ Applied Surface Sience 263 2012   416-422 DOI: 10.1016/j.apsusc.2012.09.071 | PDF verfügbar published formated output
M. Hans A. Erbe, S. Mathews, Y. Chen, M. Solioz, F. Mücklich „Role of Copper Oxides in Contact Killing of Bacteria“ Langmuir 29 2013   16160-16166 DOI 10.1021/la404091z | PDF vorhanden published formated output
M. Hans J. C. Támara, S. Mathews, B. Bax, A. Hegetschweiler, R. Kautenburger, M. Solioz, F. Mücklich „Laser cladding of stainless steel with a copper–silver alloy to generate surfaces of high antimicrobial activity“ Applied Surface Science 320 2014   195-199 DOI: 10.1016/j.apsusc.2014.09.069 published formated output
M. Hans S. Mathews, F. Mücklich, M. Solioz „Physicochemical properties of copper important for its antibacterial activity and development of a unified model“ Biointerphases 11 2016     http://dx.doi.org/10.1116/1.4935853 published formated output
M. Engstler S. Mayer, C. Pauly, H. Clemens, F. Mücklich „3D characterization of an intermetallic β/γ-titanium aluminide alloy“ Advanced Engineering Materials 15 2013   1125-1128 DOI: 10.1002/adem.201300041 published formated output
M. Duarte A. Lasagni, R. Giovanelli, J. Narciso, E. Louis, F. Mücklich „Increasing Lubricant Lifetime by Grooving Periodical Patterns using Laser Interference Metallurgy“ Advanced Engineering Materials 10 2008 6 554-558 DOI: 10.1002/adem.200700321 | PDF verfügbar published formated output
M. D´Alessandria A. Lasagni, F. Mücklich „Direct Micro-patterning of Aluminum Substrates via Laser Interference Metallurgy“ Applied Surface Science 255 2008 5 3210-3216 DOI:10.1016/j.apsusc.2008.09.018 published formated output
M. D´Alessandria F. Mücklich „Tailoring the Chemical Behavior of Aluminum for Selective Etching by Laser Interference Metallurgy“ Applied Physics A 98 2009   311-320 DOI: 10.1007/s00339-009-5398-5 | PDF verfügbar published formated output
M. Alishahi F. Mahboubi, S.M. Mousavi Khoie, M. Aparicio, R. Hübner, F. Soldera, R. Gago „Electrochemical behavior of nanocrystalline Ta/TaN multilayer on 316L stainless steel: Novel bipolar plates for proton exchange membrane fuel-cells“ Journal of Power Sources 322 2016   1-9 dx.doi.org/10.1016/jpowsour.2016.04133 published formated output
M. A. Guitar A. Scheid, S. Suárez, D. Britz, M. Duarte Guigou, F. Mücklich „Secondary carbides in high chromium cst irons: an alternative approach to their morphological and spatial distribution characterization“ Materials Characterization 144 2018   621-630   published formated output
M. A. Guitar S. Suárez, O.Prat, M.Duarte Guigou, V. Gari, G. Pereira, F. Mücklich „High Chromium Cast Irons: Destabilized-Subcritical Secondary Carbide Precipitation and its Effect on Hardness and Wear Properties“ Journal of Materials Engineering and Performance 27 2018   3877-3885   published formated output
Li, J.H. Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F., Schumacher, P. „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia 108 2016   207 - 218 doi:10.1016/j.actamat.2016.01.053 published formated output
L. Reinert M. Zeiger, S. Suárez, V. Presser, F. Mücklich „Dispersion analysis of carbon nanotubes, carbon onions and nanodiamonds for their application as reinforcement phase in nickel metal matrix composites “ RSC Advances   2015   95149-95159 DOI: 10.1039/c5ra14310a published formated output
L. Reinert S Suárez, A Rosenkranz „Tribo-Mechanisms of Carbon Nanotubes: Friction and Wear Behavior of CNT-Reinforced Nickel Matrix Composites and CNT-Coated Bulk Nickel“ Lubricants 4 2016 2 11 DOI:10.3390/lubricants4020011 published formated output
L. Reinert F. Lasserre, C. Gachot, P. Grützmacher, T. MacLucas, N. Souza, F. Mücklich, S. Suarez „Long-lasting solid lubrication by CNT-coated patterned surfaces“ Scientific Reports 7 2017   42873 Doi: 10.1038/srep42873 published formated output
L. Reinert S. Suarez, T. Müller, F. Mücklich „Carbon Nanoparticle-Reinforced Metal Matrix Composites: Microstructural Tailoring and Predictive Modeling“ Adv. Eng. Mater. 19 2017   1600750 DOI: 10.1002/adem.201600750 published formated output
L. Reinert S. Schütz, S. Suarez, F. Mücklich „Influence of Surface Roughness on the Lubrication Effect of Carbon Nanoparticle-Coated Steel Surfaces“ Tribol. Lett. 66 2018     doi: 10.1007/s11249-018-1001-6 published formated output
L. Reinert M. Varenberg, F. Mücklich, S. Suarez „Dry friction and wear of self-lubricating carbon nanotube-containing surfaces“ Wear 406-407 2018   33-42   published formated output
L. Reinert I. Green, S. Gimmler, B. Lechthaler, F. Mücklich and S. Suarez „Tribological behavior of self-lubricating carbon nanoparticle reinforced metal matrix composites“ Wear 408-409 2018   72-85   published formated output
K.M. Calamba I.C. Schramm, M.P. Johansson Joesaar, J. Ghanbaja, J.F. Pierson, F. Mücklich, M. Odén „Enhanced thermal stability and mechanical properties of nitrogen deficient titanium aluminum nitride (Ti0.54AI0.46Ny) thin films by tuning the applied negative bias voltage“ Journal of Applied Physics 122 2017 255     published formated output
K.E. Trinh A. Tsipenyuk, M. Varenberg, A. Rosenkranz, N. Souza, F. Mücklich „Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting“ Wear 344-345 2015   86-98 doi:10.1016/j.wear.2015.10.010 published formated output
K. Yalamanchili I.C. Schramm, E. Jiménez-Piqué, L. Rogström, F. Mücklich, M. Odén, N. Ghafoor „Tuning hardness and fracture resistance of ZrN/Zr0.63Al0.37N nanoscale multilayers by stress-induced transformation toughening“ Acta Materialia 89 2015   22-31 DOI:10.1016/j.actamat.2015.01.066 published formated output
K. Yalamanchili F. Wang, H. Aboulfadl, J. Barrirero, L. Rogström, E. Jiménez-Pique, F. Mücklich, F. Tasnadi, M. Odén, N. Ghafoor „Growth and thermal stability of TiN/ZrAlN: Effect of internal interfaces“ Acta Materialia 121 2016   396 - 406 doi:10.1016/j.actamat.2016.07.006 published formated output
K. Woll C. Holzapfel, H. A. Gobran, F. Mücklich „Single-Phase Interdiffusion in B2-RuAl Intermetallic Compound“ Scripta Materialia 57 2007 1 1-4   published formated output
K. Woll C. Holzapfel, F. Mücklich „Effects of composition and grain size on the interdiffusional behaviour in B2-RuAl intermetallic compound“ Intermetallics 18 2010 4 553-559 DOI:10.1016/j.intermet.2009.10.002 | PDF verfügbar published formated output
K. Woll R. K. S. Chinnam, F. Mücklich „Thin-Film Synthesis and Cyclic Oxidation Behavior of B2-RuAl“ Materials Research Society Symposium Proceedings 1128 2009   U06-10 DOI: 10.1557/PROC-1128-U06-10 published formated output
K. Woll P. Souza, A. Barnoush, F. Mücklich „RuAl Intermetallic Compound as Prospective Material for Functional Coating Applications“ Plansee Seminar 2009 Proceedings 1 2009   RM 35/1-RM 35/8   published formated output
K. Woll A. Barnoush, R. Hermann, F. Mücklich „Single-Crystal Mechanical Properties of B2-RuAl Intermetallic Compound“ Intermetallics   2010       submitted formated output
K. Woll I. E. Gunduz, C. Pauly, C. C. Doumanidis, S. F. Son, C. Rebholz, F. Mücklich „Numerical modeling of self-propagating reactions in Ru/Al nanoscale multilayer foils“ Applied Physics Letters 107 2015     doi: 10.1063/1.4928665 published formated output
K. Woll A. Bergamaschi, K. Nordlung, K. Avchachov, D. Flyura, C. Wagner, F. Mücklich, C. Pauly „Ru/Al Multilayers Integrate Maximum Energy Density and Ductility for Reactive Materials“ Scientific Reports   2015       accepted formated output
K. W.Liu F. Mücklich, R. Birringer „Formation of Eutectic RuAl/Ru Nanocomposite by Mechanical Alloying and Subsequent Annealing“ Journal of Materials Research 16 2001 9 2459-2462   published formated output
K. W. Liu C. Gachot, P. Leibenguth, F. Mücklich „Combinatorial Experiment in Ni-Ti Thin Films by Laser Interference Structuring“ Applied Surface Science 247 2005   550-555 DOI: 10.1016/j.apsusc.2005.01.123 | PDF verfügbar published formated output
K. W. Liu F. Mücklich „High-Temperature Stability of Nano-Grained B2-Structured RuAl-Based Intermetallics by Mechanical Alloying“ Intermetallics 13 2005 3 373-376 DOI: 10.1016/j.intermet.2004.07.015 | PDF verfügbar published formated output
K. W. Liu F. Mücklich „Synthesis of RuAl/ZrO2 Nanocomposite by Mechanical Alloying and Subsequent Annealing“ Scripta Materialia 49 2003 3 207-212   published formated output
K. W. Liu F. Mücklich „Formation of Nano-RuAl by Mechanical Alloying and its Thermal Stability“ Materials Science and Engineering   2002   112-117   published formated output
K. W. Liu F. Mücklich, R. Birringer „Formation of Eutectic RuAl/Ru Nanocomposite by Mechanical Alloying and Subsequent Annealing“ Journal of Materials Research 16 2001   2459-2462   published formated output
K. W. Liu F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig „Synthesis of Nanocrystalline B2 Structured (Ru,Ni)Al in the Ternary Ru-Al-Ni System by Mechanical Alloying and its Thermal Stability“ Materials Science and Engineering   2001   187-197   published formated output
K. W. Liu F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig „Synthesis of Nanocrystalline B2 Structured (Ru,Ir)Al in the Ternary Ru-Al-Ir System by Mechanical Alloying and its Thermal Stability“ Zeitschrift für Metallkunde 92 2001 8 924-930   published formated output
K. W. Liu F. Mücklich „Thermal Stability of Nano-RuAl Produced by Mechanical Alloying“ Acta Materialia 49 2001   395-403   published formated output
K. W. Liu F. Mücklich „Synthesis of Nano-RuAl by Mechanical Alloying“ Intermetallics 9 2001   81-88   published formated output
K. Trinh E. Ramos-Moore, I. Green, C. Pauly, M. Zamanzade, F. Mücklich „Topographical and Microstructural Effects of Laser Surface Texturing on Tin-coated Copper Electrical Connectors under Load Cycling“ IEEE Transactions on Components, Packaging and Manufacturing Technology   2015       accepted formated output
K. Rochlus S. Slawik, F. Mücklich „Influences of the Edge Area Preparation Suitable for EBSD of Ferrous Materials of Different Degrees of Hardness“ Practical Metallography 53 2016   393-407 doi:10.3139/147.110405 submitted formated output
K. Roberts G. Weikum, F. Mücklich „Examinations of the Automatic Classification of Lamellar Graphite Using the Support Vector Machine“ Practical Metallography 42 2005   396-410 PDF verfügbar published formated output
K. Ogasawara N. Sakai, M. Koblischka, A. Koblischka-Veneva, M. Murakami „Effects of Subgrains on Critical Current Properties in Melt-processed RE–Ba–Cu–O Bulk Superconductors“ Superconductor Science and Technology 17 2004   61-65   published formated output
K. Ogasawara N. Sakai, A. Koblischka-Veneva, M. R. Koblischka, M. Murakami „Subgrain Structures and Superconductivity in RE-Ba-Cu-O Bulk Superconductors“ Physica C 386 2003   225-230   published formated output
K. Khurana F. Müller, K. Jacobs, T. Faidt, J.-U.Neurohr, S. Grandthyll, F. Mücklich, C. Canal, M. Pau Ginebra „Plasma polymerized bioceramics for drug delivery: Do surface changes alter biological behaviour?“ European Polymer Journal 107 2018   25-33   published formated output
K. Aristizabal A. Katzensteiner, A. Bachmaier, F. Mücklich, S. Suarez „Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation“ Carbon 125 2017   156-161   published formated output
K. Aristizabal S. Suarez, A. Katzensteiner, A. Bachmaier, F. Mücklich „Evolution of the microstructure in carbon nanotube reinforced Nickel matrix composites processed by high-pressure torsion“ IOP Conf. Ser. Mater. Sci. Eng. 258 2017   12008 DOI: 10.1088/1757-899X/258/1/012008 published formated output
K. Aristizabal A. Katzensteiner, A. Bachmaier, F. Mücklich, S. Suarez „On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation“ Materials Characterization 136 2018   375-381   published formated output
K. Aristizabal A. Katzensteiner, M. Leoni, F. Mücklich, S. Suarez „Evolution of the lattice defects and crystalline domain size in carbon nanotube metal atrix composites processed by severe plastic deformation“ Materials Characterization   2019     DOI: 10.1016/j.matchar.2019.06.019 published formated output
José Garcia Thais Carvalho Miranda, Haroldo C. Pinto, Flavio Soldera, Frank Mücklich „3D-FIB characterization of wear in WC-Co coated composites“ Materials Science Forum 825-826 2015   995-1000 doi:10.4028/www.scientific.net/MSF.825-826.995 published formated output
J.-F. Pierson Y. Wang, J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2015   1732-1739   published formated output
J. Webel J. Gola, D. Britz, F. Mücklich „A new analysis approach based on Haralick texture features for the characterization of microstructure on the example of low-alloy steels “ Materials Characterization 144 2018   584-596   published formated output
J. Riedrich-Möller L. Kipfstuhl, C. Hepp, E. Neu, C. Pauly, F. Mücklich, A. Baur, M. Wandt, S. Wolff, M. Fischer, S. Gsell, M. Schreck, C. Becher „One- and two-dimensional photonic crystal microcavities in single crystal diamond“ Nature Nanotechnology 7 2012   69-74 DOI:10.1038/nnano.2011.190 | PDF verfügbar published formated output
J. Riedrich-Möller C. Arend, C. Pauly, F. Mücklich, M. Fischer, S. Gsell, M. Schreck, C. Becher „Deterministic coupling of a single silicon-vacancy color center to a photonic crystal cavity in diamond“ Nano Letters 14 2014 9 5281–5287 DOI: 10.1021/nl502327b published formated output
J. Riedrich-Möller S. Pezzagna, J. Meijer, C. Pauly, F. Mücklich, M. Markham, A. Edmonds, C. Becher „Nanoimplantation and Purcell enhancement of single nitrogen-cacany center in photonic crystal cavities in diamond“ Applied Physics Letters 106 2015   221103   published formated output
J. Rager A. Nagel, M. Schwenger, A. Flaig, G. Schneider, F. Mücklich „Platinum Ceramic Composites as New Electrode Materials: Fabrication, Sintering, Microstructure and Properties“ Advanced Engineering Materials 8 2006 1 81-88 DOI: 10.1002/adem.200500192 | PDF verfügbar published formated output
J. Rager A. Flaig, G. Schneider, T. Kaiser, F. Soldera, F. Mücklich „Oxidation Damage of Spark Plug Electrodes“ Advanced Engineering Materials 7 2005   633-640 DOI: 10.1002/adem.200500025 | PDF verfügbar published formated output
J. Pan H. Shen, U. Werner, J. D. Prades, F. Hernandez-Ramirez, F. Soldera, F. Mücklich, S. Mathur „Heteroepitaxy of SnO2 Nanowire Arrays on TiO2 Single Crystals: Growth Patterns and Tomographic Studies“ The Journal of Physical Chemistry C 115 2011 31 15191-15197 DOI: 10.1021/jp202685a. | PDF verfügbar published formated output
J. Ohser F. Mücklich „Stereology for Some Classes of Polyhedrons“ Advances in Applied Probability 27 1995 2 384-396   published formated output
J. Luo C. Hein, F. Mücklich, M. Solioz „Killing of bacteria by copper, cadmium, and silver surfaces reveals relevant physicochemical parameters“ Biointerphases 12 2017 2 020301   published formated output
J. Li J. Barrirero, G. Sha, H. Aboulfadl, F. Mücklich, P. Schumacher „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia           submitted formated output
J. Lee P. Srimuk, K. Aristizabal, C. Kim, S. Choudhury, Y.C.Nah, F. Mücklich, V. Presser „Pseudocapacitive Desalination of Brackish Water and Seawater with Vanadium-Pen toxide-Decorated Multiwalled Carbon Nanotubes“ Chem. Sus. Chem. 10 2017 18     published formated output
J. Kodolányi P. Hoppe, E. Gröner, C. Pauly, F. Mücklich „The Mg isotope composition of presolar silicate grains from red giant stars“ Geochimica et Cosmochimica Acta 140 2014   577-605 DOI: 10.1016/j.gca.2014.05.053 published formated output
J. J. Roa H. Aboulfadl, J. Barrirero, M. Turon-Vinas, F. Mücklich, M. Anglada „Chemical segregation in a 12Ce-ZrO2/3Y-ZrO2 cermanic composite“ Mater. Charact. 132 2017   83-91   published formated output
J. J. Kochumalayil A. Meiser, F. Soldera, W. Possart „Focused Ion Beam Irradiation - Morphological and Chemical Evolution in PMMA“ Surface and Interface Analysis 41 2009   412-420 DOI: 10.1002/sia.3042 | PDF verfügbar published formated output
J. J. Kochumalayil A. Meiser, F. Soldera, W. Possart „Focused ion beam irradiation: morphological and chemical evolution in epoxy polymers“ Surface and Interface Analysis 41 2009   931-940 DOI: 10.1002/sia.3121 | PDF verfügbar published formated output
J. Gola D. Britz, T. Staudt, M. Winter, A.S. Schneider, M. Ludovici, F. Mücklich „Advanced Microstructure Classification by Data Mining Methods“ Computational Materials Science 148 2018   324-335   published formated output
J. García R. Pitonak, R. Weißenbacher, A. Köpf, F. Soldera, S. Suarez, F. Miguel, H. Pinto, A. Kostka, F. Mücklich „Design and Characterization of Novel Wear Resistant Multilayer CVD Coatings with Improved Adhesion Between Al2O3 and Ti(C,N)“ Advanced Engineering Materials 12 2010 9 929-934 DOI: 10.1002/adem.201000130 | PDF verfügbar published formated output
J. García T. Carvalho Miranda, Haroldo C. Pinto, F. Soldera, F. Mücklich „3D-FIB characterization of wear in WC-Co coated composites“ Materials Science Forum 825-826 2015   995-1000   published formated output
J. Fiscina D. Jankovic-Ilic, F. Mücklich „Applying the Brazil Nut Approach to Manufacture W-Cu Graded Materials“ Granular Matter 6 2004   207-213   published formated output
J. Fiscina M. Ohligschläger, F. Mücklich „W-Cu Graded Alloys Produced by Size Segregation of Agglomerates Induced by Vertical Vibration at High Frequencies“ Journal of Materials Science Letters 22 2003   1455-1457   published formated output
J. Barrirero M. Engstler, N. Ghafoor, N. de Jonge, M. Odén, F. Mücklich „Comparison of segregations formed in unmodified and Sr-modified Al-Si alloys studied by atom probe tomography and transmission electron microscopy“ Journal of Alloys and Compounds 611 2014   410-421 DOI: 10.1016/j.jallcom.2014.05.121 published formated output
J. Barrirero J. Li, M. Engstler, N. Ghafoor, P. Schumacher, M. Odén, F. Mücklich „Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys“ Scripta Materialia 117 2016   16-19 DOI: 10.1016/j.scriptamat.2016.02.018 published formated output
J. Balach F. Miguel, F. Soldera, D. Acevedo, F. Mücklich, C. Barbero „A direct and quantitative image of the internal nanostructure of nonordered porous monolithic carbon using FIB nanotomography“ Journal of Microscopy 246 2012 3 274-278 DOI: 10.1111/j.1365-2818.2012.03615.x | PDF Verfügbar published formated output
J. Balach F. Soldera, D. F. Acevedo, F. Mücklich, C. A. Barbero „A Direct and Quantitative Three-Dimensional Reconstruction of the Internal Structure of Disordered Mesoporous Carbon with Tailored Pore Size“ Microscopy and Microanalysis 19 2013   745-750 DOI: 10.1017/S1431927613000238 | PDF verfügbar published formated output
I. El Azhari J. Garcia M. Zamanzade, F. Soldera, C. Pauly, L. Llanes, F. Mücklich „Investigations on micro-mechanical properties of polycrystalline Ti(C, N) and Zr(C,N) coatings“ Acta Materialia 149 2018   364-376   published formated output
I. El Azhari J. Barrirero, J. Garcia, F. Soldera, L. Llanes, F. Mücklich „Atom Probe Tomography investigations on grain boundary segregation in polycrystalline Ti(C,N) and Zr(C,N) CVD coatings“ Scripta Materialia 162 2019   335-340 doi.org/10.1016/j.scriptamat.2018.11.041 published formated output
I. C. Schramm M. P. Johansson Jõesaar, J. Jensen, F. Mücklich, M. Odén „Impact of nitrogen vacancies on the high temperature behavior of (Ti1-xAlx)Ny alloys“ Acta Materialia 119 2016   218-228   published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, P. Eklund, J. Schmauch, F. Mücklich, M. Odén „Solid state formation of Ti4AlN3 in cathodic arc deposited (Ti1−xAlx)Ny alloys“ Acta Materialia 129 2017   268-277   published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, S. Slawik, S. Suarez, F. Mücklich, M. Odén „Effects of nitrogen vacancies on phase stability and mechanical properties of arc deposited (Ti0.52Al0.48)Ny (y < 1) coatings“ Surface & Coatings Technology 330 2017   77-86 DOI: 10.1016/j.surfcoat.2017.09.043 published formated output
Holzapfel, C. Pauly, C. Engstler, M., Mücklich, F. „Electron beam characterization techniques for the study of wear in sliding contacts“ Electrical Contacts (Holm), 2015 IEEE 61st Holm Conference on Electrical Contacts   2015   227-234 doi: 10.1109/HOLM.2015.7355102 published formated output
Hans, M. Rojan, A.-L., Mücklich, F. „Imaging Structural Damage of Bacteria on antibacterial Copper - a Scanning Electron Microscopy Study Using FIB Cross-Sectioning“ Pract. Metallogr. 52 2015 4 205-213   published formated output
H.A. Gobran F. Mücklich „Synthesis of Single Phase RuAl Intermetallic Compound by Reactive Powder Processing“ International Journal of Self-Propagating High-Temperature Synthesis 15 2006 1 71   published formated output
H.A. Gobran D. Heger, F. Mücklich „Determination of RuAl Phase Boundaries in Binary RuAl Phase Diagram at Room Temperature and 1200°C“ Zeitschrift für Metallkunde 96 2005 7 792-798   published formated output
H.A. Gobran N. Ilic, F. Mücklich „Effects of Particle Size and Pressure on the Reactive Sintering of RuAl Intermetallic Compound“ Intermetallics 12 2004 5 555-562   published formated output
H.A. Gobran K. W. Liu, D. Heger, F. Mücklich „Investigation on Point Defect Structure in Single Phase B2 Type RuAl Alloys by Lattice Parameter Measurements“ Scripta Materialia 49 2003 12 1097-1102   published formated output
H.A. Gobran C. Holzapfel, F. Mücklich „Determination of Vacancy Concentration as a Function of Composition in the B2 Type RuAl Intermetallic Compound“ Scripta Materialia   2006       submitted formated output
H. Shanak K.-H. Ehses, W. Götz, P. Leibenguth, R. Pelster „X-Ray Diffraction Investigations of α- Polyamide 6 Films: Orientation and Structural Changes upon Uni- and Biaxial Drawing“ Journal of Materials Science 44 2009 2 655-663 DOI: 10.1007/s10853-008-3062-7 | PDF verfügbar published formated output
H. Aboulfadl I. Gallino, R. Busch, F. Mücklich „Atomic scale analysis of phase formation and diffusion kinetics in AG/Al multilayer thin films“ Applied Physics 120 2016   pp. 195306 doi:10.1063/1.4968013 published formated output
H. Aboulfadl F. Seifried, M. Stüber, F. Mücklich „Interdiffusion in as-deposited Ni/Ti multilayer thin films analyzed by atom probe tomography“ Materials Letters 236 2018   92-95   published formated output
G. Mitov J. Gessner, U. Lohbauer, K. Woll, F. Mücklich, P. Pospiech „Subcritical Crack Growth Behavior and Life Data Analysis of Two Types of Dental Y-TZP Ceramics“ Dental Materials 27 2011 7 684–691 DOI:10.1016/j.dental.2011.03.010 | PDF verfügbar published formated output
G. Mitov S. D. Heintze, S. Walz, K. Woll, F. Mücklich, P. Pospiech „Wear Behavior of Dental Y-TZP Ceramic against Natural Enamel after Different Finishing Procedures“ Dental Materials 28 2012 8 909-918 DOI: 10.1016/j.dental.2012.04.010 | PDF verfügbar published formated output
G. Grass M. Hans, F. Mücklich, M. Solloz, C. Rensing „Massive Kupferwerkstoffe in der Hygiene und Infektionsprävention“ Hygiene&Medizin 40 2015 11 458-463   published formated output
F.L. Miguel R. Müller, M. Weinmann, R. Hempelmann, S. Mathur, F. Mücklich „Production and characterization of nanocomposite thin films based on Ni matrix reinforced with SnO2 single-crystalline nanowires for electrical contact applications“ Journal of Alloys and Compounds 603 2014   14-18 DOI: 10.1016/j.jallcom.2014.03.066 published formated output
F.L. Miguel R. Müller, S. Mathur, F. Mücklich „On the thermal stability of electrodeposited Ni-matrix-nanocomposite films reinforced with Ag-coated SnO2 nanowires, Surface and Coatings Technology“ Surface and Coatings Technology 287 2016   93-102 http://dx.doi.org/10.1016/j.surfcoat.2015.12.085 submitted formated output
F.L. Miguel R. Müller, S. Mathur, F. Mücklich „Microstructure and mechanical properties of electrodeposited Ni and Ni–matrix-nanocomposite thin films“ Materials Science and Engineering A, 646 2015   254-262 http://dx.doi.org/10.1016/j.msea.2015.08.069 published formated output
F. Yu F. Mücklich, P. Li, H. Shen, S. Mathur, C.-M. Lehr, U. Bakowsky „In Vitro Cell Response to Polymer Surface Micropatterned by Laser Interference Lithography“ Biomacromolecules 6 2005   1160-1167 DOI: 10.1021/bm049324w | PDF verfügbar published formated output
F. Yu P. Li, H. Shen, S. Mathur, C.-M. Lehr, U. Bakowsky, F. Mücklich „Laser Interference Lithography as a New and Efficient Technique for Micropatterning of Biopolymer Surface“ Biomaterials 26 2005 15 2307-2312 DOI: 10.1016/j.biomaterials.2004.07.021 | PDF verfügbar published formated output
F. Wang Holec, D., Odén, M., Mücklich, F., Abrikosov, I.A., Tasnádi, F. „Systematic ab initio investigation of the elastic modulus in quaternary transition metal nitride alloys and their coherent multilayers“ Acta Materialia 127 2017   124-132   published formated output
F. Wang I.A. Abrikosov, S. Simak, M. Odén, F. Mücklich, F. Tasnádi „Coherency effects on the mixing thermodynamics of cubic Ti1-xAlxN/TiN(001) multilayers“ Physical Review B 93 2016   174201   published formated output
F. Soldera N. Ilic, F. Mücklich „TEM-Investigations of Erosion Craters Caused by Electrical Discharge“ Practical Metallography 42 2005 11 546-554 PDF verfügbar published formated output
F. Soldera A. Lasagni, F. Mücklich, T. Kaiser, K. Hrastnik „Determination of the Cathode Erosion and Temperature for the Phases of High Voltage Discharges using FEM Simulations“ Computational Materials Science 32 2005   123-139 DOI: 10.1016/j.commatsci.2004.06.004 | PDF verfügbar published formated output
F. Soldera N. Ilic, N. Manent Conesa, I. Barrientos, F. Mücklich „Influence of the Microstructure on the Formation of Al2O3 Scales in Near Stoichiometric RuAl Produced by Arc Melting“ Intermetallics 13 2005 1 101-107 DOI: 10.1016/j.intermet.2004.06.002 | PDF verfügbar published formated output
F. Soldera A. Lasagni, F. Mücklich „FEM-Simulation of the Electrode Temperature Distribution and Crater Formation. Part I: Breakdown of an Electrical Discharge“ Journal de Physique IV 120 2004   429-437 DOI: 10.1051/jp4:2004120049 | PDF verfügbar published formated output
F. Soldera F. Mücklich „FEM-Simulation of the Electrode Temperature Distribution and Crater Formation. Part II: Arc and Glow Phases of an Electrical Discharge“ Journal de Physique IV 120 2004   439-446 DOI: 10.1051/jp4:2004120050 | PDF verfügbar published formated output
F. Soldera F. Mücklich, K. Hrastnik, T. Kaiser „Description of the Discharge Process in Spark Plugs and its Correlation with the Electrode Erosion Patterns“ IEEE Transactions on Vehicular Technology 53 2004 4 1257-1265 PDF verfügbar published formated output
F. Soldera N. Ilic, S. Brännström, I. Barrientos, H. Gobran, F. Mücklich „Formation of Al2O3 Scales on Single Phase RuAl Produced by Reactive Sintering“ Oxidation of Metals 59 2003 5 529-542 PDF verfügbar published formated output
F. Soldera M. Sierra Rota, N. Ilic, F. Mücklich „Quantification of Localised Loss of Material“ Practical Metallography 37 2000 9 477-486 PDF verfügbar published formated output
F. Soldera G. Burdiles, U. Schmid, H. Seidel, F. Mücklich „Investigation of the Interaction between Electrical Discharges and Low Resistivity Silicon Substrates“ Applied Surface Science 254 2008 7 2150-2157 DOI: 10.1016/j.apsusc.2007.08.087 | PDF verfügbar published formated output
F. Soldera Y. Gaillard, M. Anglada Gomila, F. Mücklich „FIB-Tomography of Nanoindentation Cracks in Zirconia Polycrystals“ Microscopy and Microanalysis 13 2007 2 1510-1511 DOI: 10.1017/S1431927607075654 | PDF verfügbar published formated output
F. Soldera N. Jeanvoine, K. Trinh, F. Mücklich „Investigation of the Structure of Plasma Erosions Craters using a SEM/FIB Dual Beam Workstation“ Microscopy and Microanalysis 13 2007 3 422-423 DOI: 10.1017/S1431927607082116 | PDF verfügbar published formated output
F. Müller C. Zeitz, H. Mantz, K.-H. Ehses, F. Soldera, J. Schmauch, M. Hannig, S. Hüfner, K. Jacobs „Elemental Depth Profiling of Fluoridated Hydroxyapatite: Saving Your Dentition by the Skin of Your Teeth?“ Langmuir 26 2010 24 18750-18759 DOI: 10.1021/la102325e | PDF verfügbar published formated output
F. Mücklich A. Lasagni, C. Daniel „Laser Interference Metallurgy - Using Interference as a Tool for Micro/Nano Structuring“ Zeitschrift für Metallkunde 97 2006 10 1337-1344 PDF vergügbar | ausgezeichnet mit dem Werner-Köster-Preis 2006 der DGM und des Carl-Hanser-Verlages published formated output
F. Mücklich A. Lasagni, C. Daniel „Laser Interference Metallurgy – Periodic Surface Patterning and Formation of Intermetallics“ Intermetallics 13 2005 3 437-442 DOI: 10.1016/j.intermet.2004.07.005 | PDF verfügbar published formated output
F. Mücklich J. Ohser, S. Blank, D. Katrakova, G. Petzow „Stereological Analysis of Grain Size and Grain Shape Applied to Silicon Nitride Ceramics“ Zeitschrift für Metallkunde 90 1999   557-561   published formated output
F. Mücklich D. Katrakova „Gefüge - Kontraste - Interpretationen“ Practical Metallography 35 1999   35-43   published formated output
F. Mücklich Y. Hao „Metallic and Nonmetallic X-ray Monochromators for Synchrotron Sources“ Current Option in Solid State & Materials Science 2 1997 3 311-317   published formated output
F. Mücklich J. Ohser, G. Schneider „Die Charakterisierung homogener polyedrischer Gefüge mit Hilfe des räumlichen Poisson-Voronoi-Mosaiks und der Vergleich zur DIN 50 601“ Zeitschrift für Metallkunde 88 1997 1 27-32   published formated output
F. Mücklich H. Janocha „Smart Materials - The 'IQ' of Materials in Systems“ Zeitschrift für Metallkunde 87 1996 5 357-364   published formated output
F. Mücklich G. Petzow „Development of Beryllium Single Crystal Material for Monochromator Applications“ Mineral Proc. and Extract. Met. Rev. 13 1994   193-227   published formated output
F. Mücklich S. Hartmann, M. J. Hoffmann, G. A. Schneider, J. Ohser, G. Petzow „Quantitative Description of Silicon Nitride Microstructures“ Key Engineering Materials   1994   465-469   published formated output
F. Mücklich H. Oettel, G. Petzow „Realstruktur von Einkristallen und die Intensitäten von Braggreflexen“ Zeitschrift für Metallkunde 6 1993   419-425   published formated output
F. Mücklich H. Oettel „Measurement of Harmonic Reflections - An X-ray Method for Real Structure Analysis of Semiconducting Compounds“ Physica Status Solidi A 129 1992   323-335   published formated output
F. Mücklich N. Ilic, K. Woll „RuAl and its Alloys: Part II –Mechanical Properties, Environmental Resistance and Applications“ Intermetallics 16 2008   593-608 DOI:10.1016/j.intermet.2008.02.010 | PDF verfügbar published formated output
F. Mücklich M. Engstler „Gefügetomografie mit Ionen- und Elektronenstrahlen: Ein Werkzeug zur Klärung komplexer Gefügebildung und lokaler Gefügedegradation“ Journal of Heat Treatment of Materials 64 2009 5 262-269 PDF verfügbar published formated output
F. Mücklich C. Gachot, R. Catrin, U. Schmid, A. Lasagni „Macroscopic 2D Design of Micro/Nano Grain Architectures by Laser Interference Metallurgy“ Mater. Res. Soc. Symp. Proc. 1059-KK04- 2008       published formated output
F. Mücklich F. Miguel, F. Soldera „Tomography and 3D Analysis of Microstructures and Nanowire Arrays“ 2011 MRS Fall Meeting & Exhibit, Symposium Z: Functional Metal-Oxide Nanostructures, Boston (USA)   2011       published formated output
F. Mücklich M. Engstler „Microstructure Tomography in the Micro, Nano and Atomic scale – Advanced Access to Understand Local Formation as well as Degradation of Materials Microstructure“ Microscopy and Microanalysis 16 2010 2 688-689 DOI: 10.1017/S1431927610063154 | PDF verfügbar published formated output
F. Mücklich J. Webel, H. Aboulfadl, N. Lindow, H.-C. Hege „Correlative Tomography - Extraction of Reliable Information with Adequate Resolution from mm Scale Down to Sub-nm Scale“ Microscopy and Microanalysis 20 2014   838-839 DOI: http://dx.doi.org/10.1017/S1431927614005911 published formated output
F. Lasserre A. Rosenkranz, N. Souza Carmona, M. Roble, E. Ramos-Moore, D.E. Diaz-Droguett „Simultaneous deposition of carbon nanotubes and decoration with gold-palladium nanoparticles by laser induced forward transfer“ Applied Physics A 122 2016   p. 150 DOI: 10.1007/s00339-016-9682-x published formated output
F. Lasserre S. Suarez, F. Mücklich „Ultrasonic assisted polyol-reduction of HAuCl4 for nanoparticle decoration of multiwall carbon nanotubes“ Materials Research Express 3 2016 12   DOI: 10.1088/2053-1591/3/12/125007 published formated output
F. Lasagni A. Lasagni, C. Holzapfel, F. Mücklich, H. P. Degischer „Three Dinemsional Characterization of Unmodified and Sr-Modified Al-Si Eutectics by FIB and FIB EDX Tomography“ Advanced Engineering Materials 8 2006 8 719-723 DOI: 10.1002/adem.200500276 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, M. Engstler, H. P. Degischer, F. Mücklich „Nano-characterization of Cast Structures by FIB-Tomography“ Advanced Engineering Materials 10 2008 1 62-66 DOI: 10.1002/adem.200700249 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, C. Holzapfel, F. Mücklich „Sample Preparation of Al-alloys for 3D-FIB Nano-characterization“ Practical Metallography 45 2008 5 246-250   published formated output
F. Lasagni A. Lasagni, C. Holzapfel, M. Engstler, F. Mücklich „3D Microstructural Study of AlSi8Mg5 Alloy by FIB-Tomography“ Practical Metallography 47 2010 9 487-499 DOI: 10.3139/147.110088 published formated output
F. Lasagni A. Lasagni, E. Marks, C. Holzapfel, F. Mu¨cklich, H.P. Degischer „Three-dimensional characterization of ‘as-cast’ and solution-treated AlSi12(Sr) alloys by high-resolution FIB tomography“ Acta Materialia 55 2007   3875-3882 DOI: 10.1016/j.actamat.2007.03.004 | PDF verfügbar published formated output
F. L. Miguel H. Shen, F. Soldera, T. Fischer, R. Müller, S. Mathur, F. Mücklich „Electroless deposition of a Ag matrix on semiconducting one-dimensional nanostructures“ Thin Solid Films 536 536 2013   54-56 DOI: 10.1016/j.tsf.2013.03.054 | PDF verfügbar published formated output
F. L. Miguel R. Müller, A. Rosenkranz, S. Mathur, F. Mücklich „Analysis and modelling of the dry-sliding friction and wear behaviour of electrodeposited Ni and Ni-matrix-nanocomposite films“ Wear 346-347 2016   87-98 DOI: 10.1016/j.wear.2015.11.006 published formated output
F. Kraemer C. Pauly, F. Mücklich, S. Wiese „Simulation of a flip chip onding technique using reactive foils“ Proceedings, Thermal, Mechanical and Multi-Physics Simulationand Experiments in Microelectronics and Microsystems (EuroSimE), 2015 16th International Conference on   2015       published formated output
F. G. Marro R. Chintapalli, P. Hvizdos, F. Soldera, F. Mücklich, M. Anglada „Study of Near Surface Changes in Yttria-doped Tetragonal Zirconia after Low Temperature Degradation“ International Journal of Materials Research 100 2009 1 92-96 PDF verfügbar published formated output
F. Fourouzan S Gunasekaran, A. Hedayati, E. Vuorinen, F. Mücklich „Microstructure Analysis and Mechanical Properties of Low Alloy High Strength Quenchend and Partitioned Steel“ Solid State Phenomena 258 2016   574-578 doi: 10-4028/www.scientific.net/SSP.258.574 published formated output
F. Forouzan N. Strandqvist, E. Vuorinen, E.Navara, F. Mücklich „Effect of Tempering on Microstructure and Mechanical Properties of Laser Welded and Post-Weld Treated AHSS Specimens“ Materials Science Forum   2017   18 - 24 DOI: 10.4028/www.scientific.net/MSF.891.18 published formated output
F. Forouzan E. Vuorinen, F. Mücklich „Post weld-treatment of laser welded AHSS by application of quenching and partitioning technique“ Materials Science & Engineering A   2017       accepted formated output
F. Forouzan S. Gunasekaran, Al Hedayati, E. Vuorinen, F. Mücklich „Microstructure analysis and mechanical properties of low alloy high strength quenched and partitioned steel“ Solid State Phenomena 258 2017   574 - 578   published formated output
F. Forouzan A. Guitar, E. Vuorinen, F. Mücklich „Effect of carbon partitioning, carbide precipitation and grain size on toughness of welded and quenched and partitioned (Q&P) low carbon steel “ Metals 8 2018     DOI: 10.3390/met8100747 published formated output
F. A. Lasagni A. Lasagni, I. Huertas-Olivares, C. Holazapfel, F. Mücklich „3D Nano-Characterisation of Materials by FIB-SEM/EDS Tomography“ IOP Conf. Series: Materials Science and Engineering 7 2010   012016 DOI:10.1088/1757-899X/7/1/012016 | PDF verfügbar published formated output
E.A. Alvarez C.G. Oliver, F. Soldera, J.L. García „Densification and FIB, SEM, TEM Microstructures of WC Composites with Fe or Co Matrices“ Procedia Materials Science 8 2015   406-413   published formated output
E. Roitero F. Lassere, M. Anglada, F. Mücklich, E. Jiménez-Piqué „A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality“ Dental Materials 33 2017   pp. e28-e38   published formated output
E. Roitero M. Ochoa, M. Anglada, F. Mücklich, E. Jimenez-Pique „Low temperature degradation of laser patterned 3Y-TZP: Enhancement of resistance after thermal treatment“ Journal of the European Ceramic Society 38 2018   1742-1749 10.1016/j.jeurceramsoc.2017.10.044 published formated output
E. Roitero M. Anglada, F. Mücklich, E. Jimenez-Pique „Mechanical reliability of dental grade zirconia after laser patterning“ Journal of Mechanical Behavior of Biomedical Materials 86 2018   257-263   published formated output
E. Raoms-Moore A. Rosenkranz, L.F.Matamala, A. Videla, A. Duran, J. Ramos-Grez „Effect of Surface Etsching and Electrodeposition of Copper on Nitinol“ IOP Conference Series: Materials Science and Engineering 258 2017   1-9   published formated output
E. Ramos-Moore C. Espinoza, R. S. Coelho, H. Pinto, P. Brito, F. Soldera, F. Mücklich, J. L. Garcia „Investigations on Thermal Stresses of a Graded Ti(C,N) Coating Deposited on WC-Co Hardmetal“ Advanced Materials Research 996 2014   848-854 DOI: 10.4028/www.scientific.net/AMR.996.848 published formated output
E. Ramos-Moore A. Rosenkranz „Failure Analysis of Slurry Pump Impeller Fractured at Collahuasi Mine“ Practical Metallography   2016     Accepted in PM 28.09.2016 accepted formated output
E. Ramos-Moore P. Leibenguth, S. Slawik, R.S.Coelho, D. Horwat, S. Migot, B. Lechthaler, F. Mücklich „Estimation of residual stresses in perovskite fims for capacitor applications“ Thin Solid Films 648 2018   21-25   published formated output
E. Jiménez-Piqué A. Ramos, J. A. Muñoz-Tabares, A. Hatton, F. Soldera, F. Mücklich, M. Anglada „Focused ion beam tomography of zirconia degraded under hydrothermal conditions“ Journal of the European Ceramic Society 32 2012 10 2129-2136 DOI:10.1016/j.jeurceramsoc.2012.02.011 | PDF verfügbar published formated output
E. Favret N. O. Fuentes, F. Yu „RIMAPS and Variogram analysis of the Surface Topography Induced by Laser Interference Micropatterning“ Applied Surface Science 230 2004   60-72   published formated output
E. Detemple P. Leibenguth, C. Gachot, F. Mücklich „Large-Area Patterned Formation of Intermetallic Phases on Ti/Al Multilayer Systems by Laser Interference Metallurgy“ Thin Solid Films 519 2010 2 736-741 DOI:10.1016/j.tsf.2010.08.142 | PDF verfügbar published formated output
E. Dalibón D. Heim, C. Forsich, A. Rosenkranz, M.A. Guitar „Characterization of thick and soft DLC coatings deposited on plasma nitrided austenitic stainless steel“ Diamond and Related Materials 59 2015   73-79 doi: 10.1016/j.diamond.2015.09.010 published formated output
Dalibón, E.L. Guitar, M.A., Trava-Airoldi, V., Mücklich, F., Brühl, S.P. „Plasma nitriding and DLC coatings for corrosion protection of precipitation hardening stainless steel“ Advanced Engineering Materials 18 2015 5 826-832 DOI: 10.1002/adem.201500411 published formated output
D.F. Acevedo G. Martínez, J. T. Arana, E.I. Yslas, F. Mücklich, C. Barbero, H. J. Salavagione „Easy Way to Fabricate Nanostructures on a Reactive Polymer Surface“ Journal of Physical Chemistry B 113 2009 44 14661-14666 DOI:10.1021/jp9074515 | PDF verfügbar published formated output
D. Wibbing J. Binder, W. Schinköthe, C. Pauly, C. Gachot, F. Mücklich „Sensmili: Absolutes Wegmesssystem aus einer diffraktiven q-nären Pseudo-Zufalls-Sequenz“ Technisches Messen 79 2012   44-51 PDF verfügbar published formated output
D. S. Rodríguez P. A. Arboleda, D. O. Russo, F. Soldera, C. J. R. González-Oliver, J. M. Rincón „Thermal behaviour of iron aluminium phosphate glasses containing UO2·67“ Glass Technology - European Journal of Glass Science and Technology Part A 54 2013 3 111-118   published formated output
D. Ladutkin C. Bruch, C. Günther, H. Aboulfadl, F. Mücklich „Characterization of an Albite Inclusion Containing MgO by Atom Probe Tomography“ Practical Metallography 50 2013   607-615 DOI: 10.3139/147.110262 published formated output
D. Katrakova M. Damgaard, F. Mücklich „Preparation for Electron Backscatter Diffraction with LaboPol-4 / LaboForce-1“ Structure 38 2001   19-24   published formated output
D. Katrakova F. Mücklich „Specimen Preparation for Electron Backscatter Diffraction - Part I: Metals“ Practical Metallography 38 2001   547-565   published formated output
D. Katrakova F. Mücklich „Investigation of the Corrosion of Steels in Marine Environment Using Orientation Imaging Microscopy“ Practical Metallography 37 2000   643-657   published formated output
D. Katrakova C. Maas, D. Hohnerlein, F. Mücklich „Experiences on Contrasting Microstructure Using Orientation Imaging Microscopy“ Practical Metallography 35 1998 1 4-20   published formated output
D. Jankovic-Ilic J. Fiscina, C.G. Oliver, N. Ilic, F. Mücklich „Self Formed Cu-W Finctionally Graded Material Produced via Powder Segregation“ Advanced Engineering Materials 9 2007 7 542-546   published formated output
D. Horwat M. Dehmas, A. Gutiérrez, J.-F. Pierson, A. Anders, F. Soldera, J.-L. Endrino „Efficient, Low Cost Synthesis of Sodium Platinum Bronze NaxPt3O4“ Chemistry of Materials 24 2012 13 2429-2432 DOI: dx.doi.org/10.1021/cm301179x | PDF verfügbar published formated output
D. Horwat D. I. Zakharov, J.-L. Endrino, F. Soldera, A. Anders, S. Migot, R. Karoum, P. Vernoux, J.-F. Pierson „Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition“ Surface and Coatings Technology 205 2011 2 171-177 DOI: 10.1016/j.surfcoat.2010.12.021. | PDF verfügbar published formated output
D. Bruch D. Henes, P. Leibenguth, C. Holzapfel „Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Forgings with Large Wall Thicknesses“ La Metallurgica Italiana   2008 6 7-13 17-19.06.2007, Grado, Italien published formated output
D. Britz A. Hegetschweiler, M. Roberts, F. Mücklich „Reproducible Surface Contrasting and Orientation Correlation of Low-Carbon Steels by Time-Resolved Beraha Color Etching“ Materials Performance and Characterization 5 2016 5 553 - 563   published formated output
D. Britz J. Webel, A. S. Schneider, F. Mücklich „Identifying and quantifying mricrostructures in low-alloyed steels: a correlative approach“ Metallurgia Italiana 3 2017   5 - 10   published formated output
D. Britz J. Webel, J. Gola, F. Mücklich „A Correlative Approach to Capture and Quantify Substructures by Means of Image Registration“ Practical Metallography 54 2017 10 685-696   published formated output
D. Britz A. Hegetschweiler, F. Mücklich „Opening the door to fundamental understanding of structure and color metallography - A correlative Microscopy Study on Steel“ Microscopy and Microanalysis 20 2014   834-835   published formated output
D. Acevedo A. Lasagni, C. Barbero, F. Mücklich „Simple Fabrication Method of Conductive Polymeric Arrays using Direct Laser Interference Micro/Nano Patterning“ Advanced Materials 19 2007   1272-1275   published formated output
D. Acevedo H. Salavagione, A. Lasagni, E. Morallon, F. Mücklich, C. Barbero „Fabrication of Highly Ordered Arrays of Platinum Nanoparticles Using Direct Laser Interference Patterning“ ACS Applied Materials & Interfaces 1 2009 3 549 DOI: 10.1021/am900075z | PDF verfügbar published formated output
D. Acevedo E. Frontera, M. Broglia, F. Mücklich, C. Miras, C. Barbero „One Step Lithography of Polypyrrole“ Advanced Engineering Materials 13 2011 5 405-410 DOI: 10.1002/adem.201000295 published formated output
D. Acevedo A. Lasagni, M. Cornejo, M. Politano, C. Barbero, F. Mücklich „Large Area Fabrication of Tuned Polystyrene/Poly-methylmethacrylate Periodic Structures using Laser Interference Patterning“ Langmuir 25 2009 16 9624 DOI: 10.1021/la9007944 | PDF verfügbar published formated output
D. Acevedo H. Salavagione, A. Lasagni, E. Morallón, F. Mücklich, C. Barbero „SERS Active Surface in Two Steps, Patterning and Metallization“ Advanced Engineering Materials 15 2013 5 325-329 DOI: 10.1002/adem.201200240 | PDF verfügbar published formated output
C.J.R. González Oliver F.C. Lovey, A. Caneiro, D.O. Russo, D.S. Rodríguez, F. Soldera, J. E. Fiscina, J. Ma. Rincón „Crystallization of iron phosphate glasses containing up to 19 wt.% UO2.67“ Journal of Non-Crystalline Solids 356 2010 52 2986-2993 DOI:10.1016/j.jnoncrysol.2010.06.034 | PDF verfügbar published formated output
C.J. Hsu A. Stratmann, A. Rosenkranz, C. Gachot „Enhanced growth of ZDDP based tribofims on laser-interference patterned cylinder roller bearings“ Lubricants 5 2017 39 doi:10.3390/lubrican   published formated output
C. Selzner N. Jeanvoine, A. Velichko, F. Mücklich „Untersuchung des Erosionsverhaltens von silberbasierten Kontaktwerkstoffen mittels FIB-Techniken“ Sonderheft Materialwissenschaft und Werkstofftechnik   2008       published formated output
C. Schäfer L. Reinert, T. MacLucas, P. Grützmacher, R. Merz, F. Mücklich and S. Suarez „Influence of surface design on the solid lubricity of carbon nanotubes-coated steel surfaces“ Tribology letters   2018   66-89   published formated output
C. Petersen A. Lasagni, C. Holzapfel, C. Daniel, F. Mücklich, M. Veith „SEM/TEM Characterization of Periodical Novel Amorphous/Nanocrystalline Micro-composites Obtained by Laser Interference Structuring: The System HAlO-Al·Al2O3“ Applied Surface Science 253 2007   8022-8027   published formated output
C. Pauly K. Woll, B. Bax, F. Mücklich „The role of transitional phase formation during ignition of reactive multilayers“ Applied Physical Letters 107 2015 11   http://dx.doi.org/10.1063/1.4930022 published formated output
C. Pauly K. Woll, I. Gallino, M. Stüber, H. Leiste, R. Busch, F. Mücklich „Ignition in termaryRu/Al-based reactive multilayers - Effects of chemistry and stacking sequence“ Journal of Applied Physics 124 2018       published formated output
C. Mähler F. Mücklich, G. Weikum „Intelligente Suche nach Ätzrezepturen für Werkstoffe“ (referiertes) Proceeding der 8. GI-Fachtagung über Datenbanksysteme in Büro, Technik und Wissenschaft   1999   69-79 Freiburg; A.P. Buchmann (Ed.), Springer-Verlag published formated output
C. M. Menezes N. Bogoni Jr., J. Barrirero, H. Aboulfadl, F. Mücklich, C. A. Figueroa „Influence of the surface chemistry - structure relationship on the nanoscale friction of nitrided and post-oxidized iron“ Surface & Coatings Technology   2016     10.1016/j.surfcoat.2016.07.095 in press formated output
C. Holzapfel F. Soldera, E. Faundez, F. Mücklich „Site-specific structural investigations of oxidized nickel samples modified by plasma erosion processes“ Journal of Microscopy 227 2007 1 42-50 PDF verfügbar published formated output
C. Holzapfel W. Schäf, M. Marx, H. Vehoff, F. Mücklich „Interaction of Cracks with Precipitates and Grain Boundaries: Understanding Crack Growth Mechanisms through Focused Ion Beam Tomography“ Scripta Materialia 56 2007   697-700   published formated output
C. Holzapfel F. Soldera, F. Mücklich „Answering Questions in Materials Science using FIB/SEM Dual Beam Methods“ Microscopy and Microanalysis 13 2007 3 86-87 DOI : 10.1017/S1431927607080439 | PDF verfügbar published formated output
C. Holzapfel F. Soldera, C. Vollmer, P. Hoppe, F. Mücklich „TEM Foil Preparation of Sub-micrometre Sized Individual Grains by Focused Ion Beam Technique“ Journal of Microscopy 235 2009   59-66 PDF verfügbar published formated output
C. Gachot R. Catrin, A. Lasagni, U. Schmid, F. Mücklich „Comparative Study of Grain Sizes and Orientation in Microstructured Au, Pt and W Thin Films Designed by Laser Interference Metallurgy“ Applied Surface Science 255 2009   5626-5632 DOI:10.1016/j.apsusc.2008.10.032 | PDF verfügbar published formated output
C. Gachot M. Hans, R. Catrin, U. Schmid, F. Mücklich „Tuned Wettability of Material Surfaces for tribological Applications in miniaturized Systems by Laser Interference Metallurgy“ Proc. of SPIE 7362 2009   73620U-1 DOI: 10.1117/12.821661 | PDF verfügbar published formated output
C. Gachot A. Rosenkranz, L. Reinert, E. Ramos-Moore, N. Souza, M. Müser, F. Mücklich „Dry friction between laser-patterned surfaces: Role of alignment, structural wavelength and surface chemistry“ Tribology Letters 49 2013 1 193-202 DOI: 10.1007/s11249-012-0057-y | PDF verfügbar published formated output
C. Gachot A. Rosenkranz, B. Wietbrock, G. Hirt, F. Mücklich „Advanced design of hierarchical topographies in metallic surfaces by combining micro-coining and laser interference patterning“ Advanced Engineering Materials 15 2013   503-509 DOI: 10.1002/adem.201200295 published formated output
C. Gachot A. Rosenkranz, R. Buchheit, N.Souza, F.Mücklich „Tailored frictional properties by Penrose inspired surfaces produced by direct laser interference patterning“ Applied Surface Science 367 2016   174-180   published formated output
C. Gachot CJ Hsu, S Suarez, P Grützmacher, A Rosenkranz, A Stratmann, G Jacobs „Microstructural and Chemical Characterization of the Tribolayer Formation in Highly Loaded Cylindrical Roller Thrust Bearings“ Lubricants 4 2016 2 19 DOI:10.3390/lubricants4020019 published formated output
C. Gachot A. Rosenkranz, S.M. Hsu, H.L. Costa „A Critical Assessment of Surface Texturirng: Current Understandings“ Wear   2016     Invited Review Article accepted in Wear 29.11.2016 accepted formated output
C. de Melo Sánchez M. Jullien, J. Ghanbaja, F. Montaigne, J.-F. Pierson, F. Soldera, F. Rigoni, N. Almqvist, A. Vomiero, F. Mücklich, D. Horwat „Local structure and point defects-dependent Area-Selective Atomic Layer Deposition Approach for Facile Synthesis of p-Cu2O/n-ZnO Segmented Nano-junctions “ ACS Applied Materials & Interfaces   2018       accepted formated output
C. Daniel T. J. Balk, T. Wübben, F. Mücklich „Bio-Mimetic Scaling of Mechanical Behavior of Thin Films, Coatings and Surfaces by Laser Interference Metallurgy“ Advanced Engineering Materials 7 2005 9 823-826 DOI: 10.1002/adem.200500110 | PDF verfügbar published formated output
C. Daniel F. Mücklich „Micro-Structural Characterization of Laser Interference Irradiated Ni-Al Multi-Films“ Applied Surface Science 242 2005   140-146 DOI: 10.1016/j.apsusc.2004.08.008 | PDF verfügbar published formated output
C. Daniel F. Mücklich „Electrical Behaviour of Periodically Micro-Structured Sn/CuSn4 Contact Models under Fretting Conditions“ Wear 257 2004   266-270   published formated output
C. Daniel F. Mücklich „Quantification of Periodic Surface Structures by White-Light Interferometry“ Practical Metallography 41 2004 6 277-285   published formated output
C. Daniel A. Lasagni, F. Mücklich „Stress and Texture Evolution of Ni/Al Multi-Film by Laser Interference Irradiation“ Surface & Coatings Technology   2004   478-482   published formated output
C. Daniel F. Mücklich, J. Müller, P. Rehbein, V. Haas „Characterization of Periodic Micro-/Nano-Patterns for Wear Minimization of Electrical Contacts“ Practical Metallography 40 2003 8 377-386   published formated output
C. Daniel F. Mücklich, Z. Liu „Periodical Micro-Nano-Structuring of Metallic Surfaces by Interfering Laser Beams“ Applied Surface Sciences   2003   317-321   published formated output
C. Carrasco G. Inzunza, C. Camurri, C. Rodríguez, L. Radovic, F. Soldera, S. Suarez „Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans“ Materials Science & Engineering 617 2014   146–155 DOI: 10.1016/j.msea.2014.08.057 published formated output
B. Reinsch S. Nufer, F. Soldera, F. Mücklich „Metallographic Evaluation of Selective Oxidation for the Temperature Measurement on Spark Plug Electrodes“ Practical Metallography 55 2018   19-36   published formated output
B. Raillard C. Gachot, M. Hans, P. Leibenguth, F. Mücklich „Microstructural characterization of laser-irradiated bulk copper under dry sliding conditions“ Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226 2012 6 541-551 DOI: 10.1177/1350650112440924 | PDF verfügbar published formated output
B. Raillard L. Gouton, E. Ramos-Moore, S. Grandthyll, F. Müller, F. Mücklich „Ablation effects of femtosecond laser functionalization on steel surfaces“ Surface and Coatings Technology 207 2012   102-109 DOI: 10.1016/j.surfcoat.2012.06.023 | PDF verfügbar published formated output
B. Raillard J. Rémond, E. Ramos-Moore, N. Souza, C. Gachot, F. Mücklich „Wetting Properties of Steel Surfaces Modified by Laser Interference Metallurgy“ Advanced Engineering Materials 15 2013 5 341-346 DOI: 10.1002/adem.201200247 | PDF verfügbar published formated output
B. Bax C. Pauly, P. Leibenguth, K. Woll, F. Mücklich „Synthesis of B2-RuAl coatings on mild steel by laser cladding“ Surface and Coatings Technology 206 2012 19 3931-3937 DOI: 10.1016/j.surfcoat.2012.03.063. | PDF verfügbar published formated output
B. Bax M. Schäfer, C. Pauly, F. Mücklich „Coating and prototyping of single-phase iron aluminide by laser cladding“ Surface and Coatings Technology 235 2013   773-777 DOI: 10.1016/j.surfcoat.2013.09.001 | PDF vorhanden published formated output
B. Bax S. Slawik, C. Pauly, F. Mücklich „Experimental investigation of phase equilibria in the Ru-Fe-Al system at 1473 K“ Intermetallics 64 2015   96-101 DOI:10.1016/j.intermet.2015.05.002 published formated output
A.Velichko F. Mücklich „Quantitative 3D-Gefügeanalyse – Stereologie oder Tomographie?“ Practical Metallography 45 2008   423-439   published formated output
A.Manzoni A. Denquin, P. Vernaut, F. Prima, U. Puente-Orench, C. Pauly, F. Mücklich, R. A. Portier „Constrained hierarchical twinning in Ru-based high temperature shape memory alloys Acta Materialia“ Acta Materialia 111 2016   283-296   published formated output
A.I. Kovalev A. Rashkovskiy, Yu., D. L. Wainstein, R. Gago, F. Soldera, J. L. Endrino „Influence of electronic structure, plasmon-phonon and plasmon-polariton excitations on anomalously low heat conductivity in TiAlN/Ag nanoscale multilayer coatings“ Current Applied Physics 16 2016 4 459-468 DOI: 10.1016/j.cap.2016.01.012 published formated output
A.F. Lasagni C. Gachot, K.E.Trinh, M. Hans, A. Rosenkranz, T. Roch, S. Eckhardt. T. Kunze, M. Bieda, D. Günther, V. Lang, F. Mücklich „Direct laser interference patterning, 20 years of development: From the basics to industrial applications“ Proc. SPIE 10092, Laser-based Micro- and Nanoprocessing XI 1009211     doi: 10.1117/12.2252   published formated output
A.E. Giba P. Pigeat, S. Bruyere, H. Rinnert, F. Soldera, F. Mücklich, R. Gago, D. Horwat „Strong Room Temperature Blue Emission from Rapid Thermal Annealed Cerium-Doped Aluminium“ ACS Photonics 4 2017   1945-1953 DOI: 10.1021/acsphotonics.7b00233 published formated output
A. Velichko F. Mücklich „Shape Analysis and Classification of Irregular Graphite Morphology in Cast Iron“ Practical Metallography 43 2006 4 192-208 PDF verfügbar published formated output
A. Velichko F. Mücklich „Shape Analysis and Classification of Complex Objects Applied to Graphite in Cast Iron“ Proceedings of 9th ECSIA and 7th STERMAT Vol.II   2005   315-322 ISBN 83-917834-4-8, J.Chraponski, J. Cwajna & L.Wojnar (Ed.), Zakopane, Poland published formated output
A. Velichko C. Holzapfel, F. Mücklich „3D Characterization of Graphite Morphologies in Cast Iron“ Advanced Engineering Materials 9 2007 1 39-45   published formated output
A. Velichko C. Holzapfel, A. Siefers, K. Schladitz, F. Mücklich „Unambiguous Classificatio of Complex Microstructures by their Three-dimensional Parameters Applied to Graphite in Cast Iron“ Acta Materialia 56 2008 9 1981-1990   published formated output
A. Velichko F. Mücklich „Microstructure Tomography – An Essential Tool to Understand 3D Microstructures and Degradation Effects“ Advances in Solid State Physics 48 2009   331-342 DOI: 10.1007/978-3-540-85859-1_26 published formated output
A. Velichko F. Mücklich „Quantitative 3D Characterisation of Graphite Morphology in Cast Iron – Correlation between Processing, Microstructure and Properties“ International Journal of Materials Research 8 2009   1031-1037 DOI: 10.3139/146.110148 published formated output
A. Velichko A. Wiegmann, F. Mücklich „Estimation of the Effective Conductivities of Complex Cast Iron Microstructures using FIB-tomographic Analysis“ Acta Materialia 57 2009   5023-5035 DOI:10.1016/j.actamat.2009.07.004 | PDF verfügbar published formated output
A. Torge P. Grützmacher, F. Mücklich, M. Schneider „The influence of mannitol on morphology and disintegration of spray-dried nano-embedded microparticles“ European Journal of Pharmaceutical Sciences 104 2017   171 - 179 DOI: 10.1016/j.ejps.2017.04.003 published formated output
A. Szurdak A. Rosenkranz, C. Gachot, G. Hirt, F. Mücklich „Manufacturing and tribological investigation of hot micro-coined lubrication pockets“ Key Engineering Materials 611-612 2014   417-424 DOI: 10.4028/www.scientific.net/KEM.611-612.417 published formated output
A. Rosenkranz B. Martin, S. Bettscheider, C. Gachot, H. Kliem, F. Mücklich „Correlation between solid–solid contact ratios and lubrication regimes measured by a refined electrical resistivity circuit“ Wear 320 2014 1 51-61 DOI: 10.1016/j.wear.2014.08.018 published formated output
A. Rosenkranz L. Reinert, C. Gachot, F. Mücklich „Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions“ Wear 318 2014 1 49-61 DOI: 10.1016/j.wear.2014.06.016 published formated output
A. Rosenkranz S. Jaeger, C. Gachot, S. Vogel, F. Mücklich „Wear behavior of laser-patterned piston rings in squeeze film dampers“ Advanced Engineering Materials 17 2015 8 1208-1214 DOI: 10.1002/adem.201400481 published formated output
A. Rosenkranz L. Reinert, C. Gachot, H. Aboulfadl, S. Grandthyll, K. Jacobs, F. Müller, F. Mücklich „Oxide formation, morphology and nanohardness of laser-patterned steel surfaces“ Advanced Engineering Materials 17 2015 8 1234-1242 DOI: 10.1002/adem.201400487 published formated output
A. Rosenkranz S. Fleischmann, C. Gachot, F. Mücklich „Anisotropic spreading behavior of PAO oil on laser-patterned stainless steel surfaces“ Advanced Engineering Materials 17 2015 11 1645-1651 DOI: 10.1002/adem.201500115 published formated output
A. Rosenkranz T. Heib, C. Gachot, F. Mücklich „Oil film life time and wear particle analysis of laser-patterned stainless steel surfaces“ Wear 334-335 2015   1-12 DOI: 10.1016/j.wear.2015.04.006 published formated output
A. Rosenkranz A. Stratmann, C. Gachot, G. Burghardt, G. Jacobs, F. Mücklich „Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three Beam Laser Interference“ Advanced Engineering Materials 18 2016 5 854-862 DOI: 10.1002/adem.201500320 published formated output
A. Rosenkranz A. Szurdak, C. Gachot, G. Hirt, F. Mücklich „Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns“ Tribology International 95 2016   290-297 DOI:10.1016/j.triboint.2015.11.035 published formated output
A. Rosenkranz M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mücklich „Direct Laser Interference Patterning: Tailoring of Contact Area for Frictional and Antibacterial Properties“ Lubricants 4 2016 2 1-15   published formated output
A. Rosenkranz P. Grützmacher, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich „Synergetic effect of laster patterning and micro coining for controlled lubricant propagation“ Surface Topography: Metrology and Properties, Special Issue   2016       submitted formated output
A. Rosenkranz J. C. Pangraz, C. Gachot, F. Mücklich „Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning“ Wear 368-369 2016   350-357 DOI: 10.1016/j.wear.2016.10.008 published formated output
A. Rosenkranz F. Krupp, L. Reinert, F. Mücklich, B. Sauer „Tribological performance of laser-patterned chain links - Influence of pattern geometry and periodicity“ Wear 370-371 2016   51-58   published formated output
A. Rosenkranz C. Gachot, E. Ramos-Moore, F. Mücklich „The influence of laser-patterned surfaces on the frictional behavior under dry and lubricated sliding conditions“ Tribology Online   2016     Accepted in Tribology Online 31.03.2016 accepted formated output
A. Rosenkranz S.A. Khan, C. Gachot, F. Mücklich „Wear behavior of micro-coined steel surfaces under mixed lubrication“ Industrial Lubrication and Tribology   2016     Accepted in Industrial Lubrication and Tribology accepted formated output
A. Rosenkranz M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mücklich „Laser Surface Patterning - Tailoring of Contact Area for Frictional and Antibacterial Properties“ Lubricants 4 2016   15 Accepted in Lubricants 19.01.2016; doi:10.3390/lubricants4010002 published formated output
A. Rosenkranz A. Szurdak, P. Grützmacher, G. Hirt, F. Mücklich „Friction reduction induced by elliptical surface patterns under lubricated conditions“ Advanced Engineering Materials   2017 255 1-7 DOI: 10.1002/adem.20170031 published formated output
A. Montenegro-Hernández A. Soldati, L. Mogni, H. Troiani, A. Schreiber, F. Soldera, A. Caneiro „Reactivity at the Ln2NiO4+d/electrolyte interface (Ln = La, Nd) studied by Electrochemical Impedance Spectroscopy and Transmission Electron Microscopy“ Journal of Power Sources 265 2014   6-13 DOI: 10.1016/j.jpowsour.2014.04.082 published formated output
A. Lasagni M. Nejati, R. Clasen, F. Mücklich „Periodical Surface Structuring of Metals by Laser Interference Metallurgy as a New Fabrication Method of Textured Solar Selective Absorbers“ Advanced Engineering Materials 6 2006 8 580-584 DOI: 10.1002/adem.200500261 | PDF verfügbar published formated output
A. Lasagni F. Mücklich „Analysis of Periodical Structures Produced by Laser Interference Structuring by Energy Dispersive X-Ray Spectrometry“ Practical Metallography 43 2006 1 16-29   published formated output
A. Lasagni M. Seyler, C. Holzapfel, W. F. Maier, F. Mücklich „Periodical Gratings in Mixed Oxide Films by Laser Interference Irradiation“ Advanced Materials 17 2005   2228-2232 DOI: 10.1002/adma.200402074 | PDF verfügbar published formated output
A. Lasagni C. Holzapfel, F. Mücklich „Periodic Pattern Formation of Intermetallic Phases with Long Range Order by Laser Interference Metallurgy“ Advanced Engineering Materials 7 2005 6 487-492 DOI: 10.1002/adem.200400206 | PDF verfügbar published formated output
A. Lasagni F. Mücklich „Structuring of metallic bi- and tri-nano-layer films by laser interference irradiation: control of the structure depth“ Applied Surface Science 247 2005   32-37 DOI: 10.1016/j.apsusc.2005.01.063 | PDF verfügbar published formated output
A. Lasagni F. Mücklich „Study of the Multilayer Metallic Films Topography Modified by Laser Interference Irradiation“ Applied Surface Science 240 2005   214-221 DOI: 10.1016/j.apsusc.2004.06.143 | PDF verfügbar published formated output
A. Lasagni F. Soldera, F. Mücklich „FEM-Simulation of Local Heating and Melting During Electrical Discharge Plasma Impact“ Modelling and Simulation in Materials Science and Engineering 12 2004   835-844   published formated output
A. Lasagni F. Soldera, F. Mücklich „Quantitative Investigation of Material Erosion Caused by High-pressure Discharges in Air and Nitrogen“ Zeitschrift für Metallkunde 95 2004 2 102-108 PDF verfügbar published formated output
A. Lasagni D. Acevedo, C. Barbero, F. Mücklich „One-step Production of Organized Architectures on polymeric Materials by Direct Laser Interference Patterning“ Advanced Engineering Materials 9 2007 1 99-103   published formated output
A. Lasagni C. Holzapfel, F. Mücklich „Production of Two-Dimensional Periodical Structures by Laser Interference Irradiation on Metallic Thin Films“ Applied Surface Science 253 2006   1555-1560 DOI: 10.1016/j.apsusc.2006.02.041 | PDF verfügbar published formated output
A. Lasagni F. Mücklich „FEM Simulation of Periodical Local Heating Caused by Laser Interference Metallurgy“ Journal of Materials Processing Technology 209 2009 1 202-209 DOI:10.1016/j.jmatprotec.2008.01.040 | PDF verfügbar published formated output
A. Lasagni C. Holzapfel, T. Weirich, F. Mücklich „Laser Interference Metallurgy: A New Method for Periodic Surface Microstructure Design on Multilayered Metallic Thin Films“ Applied Surface Science 253 2007   8070-8074   published formated output
A. Lasagni D. Acevedo, C. Barbero, F. Mücklich „Direct Patterning of Polystyrene-polymethyl Methacrylate Copolymer by Means of Laser Interference Lithography using UV Laser Irradiation“ Polymer Engineering and Science 48 2008 12 2367-2372 DOI: 10.1002/pen.21189 | PDF verfügbar published formated output
A. Lasagni M. Cornejo, F. Lasagni, F. Mücklich „Laser Ablation Modeling of Periodic Pattern Formation on Polymer Substrates“ Advanced Engineering Materials 10 2008 5 488-493 DOI: 10.1002/adem.200700323 | PDF verfügbar published formated output
A. Lasagni M. D´Alessandria, R. Giovanelli, F. Mücklich „Advanced Design of Periodical Architectures in Bulk Metals using Laser Interference Metallurgy“ Applied Surface Science 254 2007   930-936 DOI: 10.1016/j.apsusc.2007.08.010 | PDF verfügbar published formated output
A. Lasagni A. Manzoni, F. Mücklich „Micro/nano Fabrication of Periodic Hierarchical Structures by Multi-pulsed Laser Interference Structuring“ Advanced Engineering Materials 9 2007 10 872-875 DOI: 10.1002/adem.200700176 | PDF verfügbar published formated output
A. Lasagni D. Acevedo, C. Barbero, F. Mücklich „Advanced Design of Conductive Polymeric Arrays with Controlled Electrical Resistance using Direct Laser Interference Patterning“ Applied Physics A 91 2008   369-373 DOI: 10.1007/s00339-008-4477-3 | PDF verfügbar published formated output
A. L. Marzocca F. Soldera, M. Zalazar, M. I. Luppo „Study of the microstructure of a weld bead P91 steel by transmission electron microscopy“ Revista Matéria 23 2018 2     published formated output
A. Kruglova M. Roland, S. Diebels, T. Dahmen, P. Slusallk, F. Mücklich „Modelling and characterization of ductile fracture surface in Al-Si alloys by means of Voronoi tessellation“ Materials Characterization 131 2017   1 - 11 DOI: 10.1016/j.matchar.2017.06.013 published formated output
A. Koffman-Frischknecht M. Soldera, F. Soldera, M. Troviano, L. Carlos, M.D. Perez, K. Taretto „Tunimg morphological features of lead iodide by low pressure vapor phase deposition“ Thin Solid Films 653 2018   249-257   published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich, N. Hari Nabu, D.A. Cardwell, M. Murakami „Comparative Study of Grain Orientation in Melt-Textured HTSC with Different Additions“ Physica C 426-431 2005   618-624 DOI: 10.1016/j.physc.2005.01.064 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich, M. Murakami „OIM and X-Ray Texture Analysis of Melt-Textured YBCO Superconductors“ Physica Status Solidi C 2 2005   1708 DOI: 10.1002/pssc.200460816 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, F. Mücklich, M. Murakami „Orientation of Embedded Y2BaCuO5 Particles within the YBa2Cu3Ox Matrix in Melt-Textured YBCO Superconductors“ Physica Status Solidi C 2 2005   1714 DOI: 10.1002/pssc.200460817 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich, K. Ogasawara, M. Murakami „Interactions of Y2BaCuO5 Particles and the YBCO Matrix within Melt-Textured YBCO Samples Studied by Means of EBSD“ Superconductor Science and Technology 18 2005   158-163 DOI: 10.1088/0953-2048/18/2/032 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami „Position-dependent Texture Analysis of Melt-textured YBCO by Means of Electron Backscatter Diffraction“ Physica C 392 2003   607-612   published formated output
A. Koblischka-Veneva M. R. Koblischka „Microstructural Studies of K2CO3 and Rb2CO3 Doped YBCO HTSC“ Physica C 392 2003   596-600   published formated output
A. Koblischka-Veneva F. Mücklich „Orientation Imaging Microscopy Applied to BaTiO3 Ceramics“ Crystal Engineering 5 2002   235-242   published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka „A Study of Grain Orientation of Alkali Doped Polycrystalline YBCO Ceramics using an EBSD Technique“ Crystal Engineering 5 2002   411-418   published formated output
A. Koblischka-Veneva M. R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami „Orientation Imaging Microscopy Analysis of Bulk, Melt-textured YBCO Superconductors“ Crystal Engineering 5 2002   265-272   published formated output
A. Koblischka-Veneva M. R. Koblischka, P. Simon, F. Mücklich, M. Murakami „Application of Electron Backscatter Diffraction to Bulk High-TC Superconductors“ Superconductor Science and Technology 15 2002   796-802   published formated output
A. Koblischka-Veneva M. R. Koblischka, P. Simon, F. Mücklich, M. Murakami „Electron Backscatter Diffraction Study of Polycrystalline Yba2Cu3O7-x Ceramics“ Physica C 382 2002   311-322   published formated output
A. Koblischka-Veneva M. R. Koblischka, M. Murakami „Magneto-Optical and Microstructural Investigations on KCIO3-Doped YBCO HTSC“ Physica   2001   201-204   published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, F. Mücklich „Embedded Y2Ba4CuNbOx Nanoparticles in Melt-Textured YBCO Studied by Means of EBSD“ Physica C 445-448 2006   379-381 DOI: 10.1016/j.physc.2006.04.022 | PDF verfügbar published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, M. Murakami „Grain Orientations and Distribution of Y2Ba4CuUOx Phase in Melt-Textured YBCO with Addition of Depleted Uranium Oxide Studied by EBSD“ Superconductor Science and Technology 19 2006   567-571 DOI: 10.1088/0953-2048/19/7/S28 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, F. Mücklich „Crystallographic Orientation of Y2Ba4CuMOx (M = Nb, Zr, Ag) Nanoparticles Embedded in Melt-Textured YBCO Studied by EBSD“ Journal of the American Ceramic Society 90 2007   2582-2588   published formated output
A. Koblischka-Veneva M R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami „Interplay of YBCO and Embedded 211 Particles in Melt-Textured YBCO“ Journal of Superconductivity 18 2005 4 469-474 DOI: 10.1007/s10948-005-0027-9 | PDF verfügbar published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, L. Shlyk, G. Krabbes „An Electron Backscatter Diffraction Investigation of Crystallographic Orientations of Embedded Nanoparticles within Melt-textured YBCO High Temperature Superconductors“ Superconductor Science and Technology 19 2006   562-566 DOI: 10.1088/0953-2048/19/7/S27 | PDF verfügbar published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, N. Hari Babu, D. A. Cardwell „EBSD Characterisation of Y2Ba4CuUOx Phase in Melt-textured YBCO with Addition of Depleted Uranium Oxide“ Journal of Physics: Conference Series 43 2006   438-441 DOI: 10.1088/1742-6596/43/1/109 | PDF verfügbar published formated output
A. Koblischka-Veneva C. Holzapfel, F. Mücklich, M. R. Koblischka, N. Hari Babu, D. A. Cardwell „Investigation of Grain Orientations of Melt-textured HTSC with Additions of Uranium Oxide, Y2O3 and Y2BaCuO5“ Journal of Physics: Conference Series 43 2006   527-530 DOI: 10.1088/1742-6596/43/1/130 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich, Y. Zhou, S. Murphy, I.V. Shvets „Crystallographic Orientation Analyses of Magnetite Thin Films Using Electron Backscatter Diffraction (EBSD)“ IEEE Transactions on Magnetics 42 2006   2873-2875   published formated output
A. Koblischka-Veneva C. Gachot, P. Leibenguth, F. Mücklich „Investigation of Microstructure of Bulk Ni2MnGa Alloy by Means of Electron Backscatter Diffraction Analysis“ Journal of Magnetism and Magnetic Materials 316 2007   e431-e434 presented at III JOINT EUROPEAN MAGNETIC SYMPOSIA, June 3026, 2006, San Sebastian, Spain published formated output
A. Koblischka-Veneva M. R. Koblischka, Y. Zhou, S. Murphy, F. Mücklich, U. Hartmann, I. V. Shvets „Electron Backscatter Diffraction Analysis Applied to (001) Magnetite Thin Films Grown on MgO Substrates“ Journal of Magnetism and Magnetic Materials 316 2007   e663-e665 presented at III JOINT EUROPEAN MAGNETIC SYMPOSIA, June 3026, 2006, San Sebastian, Spain published formated output
A. Koblischka-Veneva M. Koblischka, J. Wei, Y. Zhou, S. Murphy, F. Mücklich, U. Hartmann, I.V. Shvets „Misorientations in [0 0 1] Magnetite Thin Films Studied by Electron Backscatter Diffraction and Magnetic Force Microscopy“ Journal of Applied Physics 101 2007   09M507 presented at the 10th Joint MMM/Intermag 2007, January 7-11, 2007, Baltimore, Maryland published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, U. Hartmann, Y. Zhou, S. Murphy, I.V. Shvets „EBSD Analysis of the Growth of [001] Magnetite Thin Films on MgO Substrates“ Materials Science and Engineering B 144 2007   64-68 presented at E-MRS spring meeting 2007, Strasbourg, Symposium H, “Nanoscale tailoring of defect structures for optimized functional & multifunctional oxide films” published formated output
A. Koblischka-Veneva M. R. Koblischka, S. Murphy, S. K. Arora, F. Mücklich, U. Hartmann, I. V. Shvets „Misorientations in [0 0 1] Magnetite Thin Films Studied by Electron Backscatter Diffraction“ Microscopy and Microanalysis 13 2007 3 362-363 presented at MC2007, 2.-7.9.2007, Saarbrücken, Germany published formated output
A. Koblischka-Veneva M. Koblischka, F. Mücklich „Ion Damage during FIB-milling of Magnetite“ Superlattices & Microstructures 44 2008   468-475 presented at E-MRS spring meeting 2007, Strasbourg, Symposium K, “Nanoscale self-assembly and patterning” published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich, T. Qu, Z. Han „Study of Grain boundary Properties in Ag-clad Bi-2212 Tapes by Multi-phase Electron Backscatter Diffraction Analysis“ Journal of Physics: Conference Series 94 2008   012011 presented at E-MRS spring meeting 2007, Strasbourg, Symposium J, “Interfacial nanostructures in ceramics: A multiscale approach” | DOI: 10.1088/1742-6596/94/1/012011 c | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Babu, D. A. Cardwell, F. Mücklich „EBSD-Analysis of Nanoparticles Embedded in High-Tc Superconductors“ Microscopy and Microanalysis 13 2007 3 360-361 presented at MC2007. 2.-7..9.2007, Saarbrücken, Germany published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, U. Hartmann, S. Murphy, I. V. Shvets „Study of Cross-sections of Magnetite Thin Films by Means of Electron-backscatter Diffraction“ Physica Status Solidi A 205 2008   1835-1838 DOI: 10.1002/pssa.200723634; presented at the 3rd Seeheim conference on magnetism, Frankfurt, Germany, 26.8.-30.8.2007 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, T. Qu, Z. Han, F. Mücklich „Texture Analysis of Monofilamentary, Ag-sheathed (Pb,Bi)2Sr2Ca2Cu3Ox Tapes by Electron Backscatter Diffraction (EBSD)“ Physica C 463 2008 3 174-182 DOI: 10.1016/j.physc.2007.11.006 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, S. Murphy, F. Mücklich, I. V. Shvets „Microtexture of Magnetite Thin Films of (001) and (111) Orientation on MgO Substrates Studied by EBSD“ Journal of Applied Physics 103 2008 7 07E505 presented at the 52nd Magnetism and Magnetic Materials Conference, November 5-9, 2007, Tampa, USA | DOI: 10.1063/1.2837283 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Babu, F. Mücklich „EBSD Analysis of Melt-textured YBCO with Embedded Ag-2411 Nanoparticles“ Materials Science and Engineering B 151 2008 65   presented at 6th PASREG 2007, Cambridge, U.K., 13.9.-15.9.2007 | DOI:10.1016/j.mseb.2008.02.012 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka,  D. Lisjak,  D. Makovec, F. Mücklich „Texture analysis of ferrite materials by means of electron backscatter diffraction (EBSD)“ IEEE Transactions on Magnetics   2008   1072 PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich „Advanced Microstructural Analysis of Ferrite Materials by Means of Electron Backscatter Diffraction (EBSD)“ Journal of Magnetism and Magnetic Materials 322 2010 9 1178–1181 presentation at JEMS’08, September 14-19, 2008, Dublin, Ireland | DOI: 10.1016/j.jmmm.2009.06.073 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, C. L. Teng, M. P. Ryan, U. Hartmann, F. Mücklich „EBSD Analysis of Electroplated Magnetite Thin Films“ Journal of Magnetism and Magnetic Materials 322 2010 9 1235-1238 presentation at JEMS’08 , September 14-19, 2008, Dublin, Ireland | DOI: 10.1016/j.jmmm.2009.03.028 | PDF verfügbar published formated output
A. Knutsson I.C. Schramm, k. Asp Grönhagen, F. Mücklich, M. Odén „Surface directed spinodal decomposition at TiAlN/TiN interfaces“ Journal of Applied Physics 113 2013     DOI: 10.1063/1.4795155, Article Number 114305 published formated output
A. Katzensteiner K. Aristizabal, S. Suarez, R. Pippan, A. Bachmaier „Temperature dependent structural evolution in nickel/carbon nanotube composites processed by high-pressure torsion“ IOP Conf. Ser. Mater. Sci. Eng. 194 2017   12019 Doi: 10.1088/1757-899X/194/1/012019 published formated output
A. Katzensteiner T. Müller, K. Kormout, K. Aristizabal, S. Suarez, R. Pippan, A. Bachmaier „Influence of Processing Parameters on the Mechanical Properties of HPT-Deformed Nickel/Carbon Nanotube Composites“ Advanced Engineering Materials   2019     DOI: 10.1002/adem.201800422 published formated output
A. I. Kovalev D.L. Wainstein, A. Yu. Rashkovskiy, R. Gago, F. Soldera, J. I. Endrino, G. S. Fox-Rabinovich „Interface-Induced Plasmon Nonhomogeneity in Nanostructured Metal-Dielctric Planar Metamaterial“ Journal of Nanomaterials   2015     DOI:10.1155/2015/876247, art. no. 876247, Open Access Publication published formated output
A. I. Kovalev D. L. Wainstein, A. Y. Rashkovskiy, R. Gago, F. Soldera, J. L. Endrino „The confinement of phonon propagation in TiAIN/Ag multilayer coatings with anomalously low heat conductivity“ Applied Physics Letters 108 2016     doi.org/10.1063/1.4953230 published formated output
A. I. Kovalev D. L. Wainstein, V. O. Vakhrushev, R. Gago, F. Soldera, J. L. Endrino, G. S. Fox-Rabinovich, S. Veldhuis „Features of electronic and lattice mechanisms of transboundary heat transfer in multilayer nanolaminate TiAlN/Ag coatings“ Scientific Reports 7     17078 DOI:10.1038/s41598-017-17291-4 published formated output
A. Hatton M. Engstler, P. Leibenguth, F. Mücklich „Characterization of Graphite Crystal Structure and Growth Mechanisms Using FIB and 3D Image Analysis“ Advanced Engineering Materials 13 2011 3 136-144 DOI: 10.1002/adem.201000234 | PDF verfügbar published formated output
A. E. Giba P. Pigeat, S. Bruyère, H. Rinnert, F. Soldera, F. Mücklich, D. Horwat „From Blue to White Luminescence in Cerium-Doped Aluminum Oxynitride: Electronic Structure and Local Chemistry Perspectives“ The Journal of Physical Chemistry   2018       accepted formated output
A. Bachmaier H. Aboulfadl, M. Pfaff, F. Mücklich, C. Motz „Structural evolution and strain induced mixing in Cu–Co composites studied by transmission electron microscopy and atom probe tomography“ Materials Characterization 100 2015   178-191 DOI: 10.1016/j.matchar.2014.12.022 published formated output
A. Bachmaier M. Pfaff, M. Stolpe, H. Aboulfadl, C. Motz „Phase separation of a supersaturated nanocrystalline Cu-Co alloy and its influence on thermal stability“ Acta Materialia 96 2015   269-283 doi:10.1016/j.actamat.2015.05.053 published formated output
A. Bachmaier J. Schmauch, H. Aboulfadl, A. Verch, C. Motz „On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu-Co alloy system during high-pressure torsion“ Acta Materialia 115 2016   333-346 doi:10.1016/j.actamat.2016.06.010 published formated output
A. Bachmaier H. Krenn, P. Knoll, H. Aboulfadl, R. Pippan „Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing“ Journal of Alloy and Compounds 725 2017   744-749 doi:10.1016/j.jallcom.2017.07.200 published formated output
A. Ababneh A. N. Al-Omari, A. M. K. Dagamseh, M. Tantawi, C. Pauly, F. Mücklich, D. Feili, H. Seidel „Electrical and morphological characterization of platinum thin-films with various adhesion layers for high temperature applications“ Microsystem Technologies 23 2017 3 703-709   published formated output
A Lasagni F. Soldera, F. Mücklich „FEM simulation of local heating and melting during electrical discharge plasma impact“ Modelling and Simulation in Materials Science and Engineering 12 (2004) 2004   835-844 DOI: 10.1088/0965-0393/12/5/005 | PDF verfügbar published formated output
J. H. Li J. Barrirero, M. Engstler, H. Aboulfadl, F. Mücklich, P. Schumacher „Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition“ Metallurgical and Materials Transactions A 46 2015 3 1300-1311 DOI: 10.1007/s11661-014-2702-6 published formated output



view full database







Publica (build 111206), (c) Lehrstuhl für Funktionswerkstoffe, Universität des Saarlandes, 2006. Konzept und Betreuung: Daniel Henry. Datenschutz, Impressum