Stand: 21.6.2021, 15:37



Benutzername: Passwort:


aktuelle Anzeige: Publications (peer-review), Eingrenzung: Co-Autor, Sortierung nach: Jahr - view full database
Vol
Jahr
No.
Seiten
 
M. Maril P. Tobosque, J. Nunez, C.A. Rodriguez, M.P. Delplancke, J. L. Delplancke, M. Yacaman, M.Josefina Arellano-Jimenez, F. Soldera, C. Carrasco „Synthesis and structural analysis of electrodeposited Pb-Co films for oxygen evolution applications“ Materials Characterization 148 2019   323-329 DOI: 10.1016/j.matchar.2018.12.031 published formated output
K. Aristizabal A. Katzensteiner, M. Leoni, F. Mücklich, S. Suarez „Evolution of the lattice defects and crystalline domain size in carbon nanotube metal atrix composites processed by severe plastic deformation“ Materials Characterization   2019     DOI: 10.1016/j.matchar.2019.06.019 published formated output
E. Roitero M. Ochoa, M. Anglada, F. Mücklich, E. Jimenez-Pique „Low temperature degradation of laser patterned 3Y-TZP: Enhancement of resistance after thermal treatment“ Journal of the European Ceramic Society 38 2018   1742-1749 10.1016/j.jeurceramsoc.2017.10.044 published formated output
S.M. Azimi D. Britz, M. Engstler, M. Fritz, F. Mücklich „Advanced Steel Microstructural Classification by Deep Learning Methods“ Scientific Reports 8 2018 1 2128   published formated output
M. Linz M. Rodriguez Ripoll, C. Pauly, J. Bernardi, A. Steiger-Thirsfeld, F. Franek, F. Mücklich, C. Gachot „Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic-Pearlitik Steel durin Lubricated Sliding“ Advanced Engineering Materials   2018       published formated output
I. El Azhari J. Garcia M. Zamanzade, F. Soldera, C. Pauly, L. Llanes, F. Mücklich „Investigations on micro-mechanical properties of polycrystalline Ti(C, N) and Zr(C,N) coatings“ Acta Materialia 149 2018   364-376   published formated output
A. Koffman-Frischknecht M. Soldera, F. Soldera, M. Troviano, L. Carlos, M.D. Perez, K. Taretto „Tunimg morphological features of lead iodide by low pressure vapor phase deposition“ Thin Solid Films 653 2018   249-257   published formated output
L. Reinert M. Varenberg, F. Mücklich, S. Suarez „Dry friction and wear of self-lubricating carbon nanotube-containing surfaces“ Wear 406-407 2018   33-42   published formated output
J. Gola D. Britz, T. Staudt, M. Winter, A.S. Schneider, M. Ludovici, F. Mücklich „Advanced Microstructure Classification by Data Mining Methods“ Computational Materials Science 148 2018   324-335   published formated output
Zea, L Nisar, Z., Rubin, P., Cortesao, M., Luo, J., McBride, S.A., Moeller, R., Klaus, D., Müller, D., Varanasi, K.K., Mücklich, F., Stodieck, L. „Design of a spaceflight biofilm experiment“ Acta Astronautica 148 2018 148 294-300 DOI: 10.1016/j.actaastro.2018.04.039 published formated output
E. Roitero M. Anglada, F. Mücklich, E. Jimenez-Pique „Mechanical reliability of dental grade zirconia after laser patterning“ Journal of Mechanical Behavior of Biomedical Materials 86 2018   257-263   published formated output
K. Khurana F. Müller, K. Jacobs, T. Faidt, J.-U.Neurohr, S. Grandthyll, F. Mücklich, C. Canal, M. Pau Ginebra „Plasma polymerized bioceramics for drug delivery: Do surface changes alter biological behaviour?“ European Polymer Journal 107 2018   25-33   published formated output
A. L. Marzocca F. Soldera, M. Zalazar, M. I. Luppo „Study of the microstructure of a weld bead P91 steel by transmission electron microscopy“ Revista Matria 23 2018 2     published formated output
C. de Melo Snchez M. Jullien, J. Ghanbaja, F. Montaigne, J.-F. Pierson, F. Soldera, F. Rigoni, N. Almqvist, A. Vomiero, F. Mcklich, D. Horwat „Local structure and point defects-dependent Area-Selective Atomic Layer Deposition Approach for Facile Synthesis of p-Cu2O/n-ZnO Segmented Nano-junctions “ ACS Applied Materials & Interfaces   2018       accepted formated output
M. A. Guitar A. Scheid, S. Surez, D. Britz, M. Duarte Guigou, F. Mcklich „Secondary carbides in high chromium cst irons: an alternative approach to their morphological and spatial distribution characterization“ Materials Characterization 144 2018   621-630   published formated output
M. A. Guitar S. Surez, O.Prat, M.Duarte Guigou, V. Gari, G. Pereira, F. Mcklich „High Chromium Cast Irons: Destabilized-Subcritical Secondary Carbide Precipitation and its Effect on Hardness and Wear Properties“ Journal of Materials Engineering and Performance 27 2018   3877-3885   published formated output
H. Aboulfadl F. Seifried, M. Stber, F. Mcklich „Interdiffusion in as-deposited Ni/Ti multilayer thin films analyzed by atom probe tomography“ Materials Letters 236 2018   92-95   published formated output
C. Pauly K. Woll, I. Gallino, M. Stber, H. Leiste, R. Busch, F. Mcklich „Ignition in termaryRu/Al-based reactive multilayers - Effects of chemistry and stacking sequence“ Journal of Applied Physics 124 2018       published formated output
F. Wang Holec, D., Odn, M., Mcklich, F., Abrikosov, I.A., Tasndi, F. „Systematic ab initio investigation of the elastic modulus in quaternary transition metal nitride alloys and their coherent multilayers“ Acta Materialia 127 2017   124-132   published formated output
E. Roitero F. Lassere, M. Anglada, F. Mcklich, E. Jimnez-Piqu „A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality“ Dental Materials 33 2017   pp. e28-e38   published formated output
N. Souza M. Roble, D. E. Diaz-Droguett, F. Mcklich „Scaling up single-wall carbon nanotube laser annealing: effect on electrical resistance and hydrogen adsorption“ RSC Advances 7 2017 9 5084 - 5092 doi:10.1039/C6RA27794B published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, P. Eklund, J. Schmauch, F. Mcklich, M. Odn „Solid state formation of Ti4AlN3 in cathodic arc deposited (Ti1−xAlx)Ny alloys“ Acta Materialia 129 2017   268-277   published formated output
A. Kruglova M. Roland, S. Diebels, T. Dahmen, P. Slusallk, F. Mcklich „Modelling and characterization of ductile fracture surface in Al-Si alloys by means of Voronoi tessellation“ Materials Characterization 131 2017   1 - 11 DOI: 10.1016/j.matchar.2017.06.013 published formated output
A. Torge P. Grtzmacher, F. Mcklich, M. Schneider „The influence of mannitol on morphology and disintegration of spray-dried nano-embedded microparticles“ European Journal of Pharmaceutical Sciences 104 2017   171 - 179 DOI: 10.1016/j.ejps.2017.04.003 published formated output
R. Schieber F. Lasserre, M. Hans, M. Fernndez-Yage, M. Diaz-Ricart, G. Escolar, M. Ginebra, F. Mcklich, M. Pegueroles „Direct Laser Interference Patterning of CoCr Alloy Surfaces to Control Endothelial Cell and Platelet Response for Cardiovascular Applications“ Advanced Health Care Materials   2017     DOI: 10.1002/adhm.201700327 published formated output
A. Ababneh A. N. Al-Omari, A.M.K.Dagamseh, M.Tantawi, C. Pauly, F. Mcklich, D. Feili, H. Seidel „Electrical and morphological characterization of platinum thin-films with various adhesion layers for high temperature applications“ Microsystem Technologies 23 2017 3 703-709   published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, S. Slawik, S. Suarez, F. Mcklich, M. Odn „Effects of nitrogen vacancies on phase stability and mechanical properties of arc deposited (Ti0.52Al0.48)Ny (y < 1) coatings“ Surface & Coatings Technology 330 2017   77-86 DOI: 10.1016/j.surfcoat.2017.09.043 published formated output
J. J. Roa H. Aboulfadl, J. Barrirero, M. Turon-Vinas, F. Mcklich, M. Anglada „Chemical segregation in a 12Ce-ZrO2/3Y-ZrO2 cermanic composite“ Mater. Charact. 132 2017   83-91   published formated output
P.K. Yalamanchili F. Wang, I. Schramm, J.M. Andersson, M.P.J. Joesaar, F. Tasndi, F. Mcklich, N. Ghafoor, M. Odn „Exploring the high entropy alloy concept in (AlTiVNbCr)N“ Thin Solid Films 636 2017   346-352   published formated output
K.M. Calamba I.C. Schramm, M.P. Johansson Joesaar, J. Ghanbaja, J.F. Pierson, F. Mcklich, M. Odn „Enhanced thermal stability and mechanical properties of nitrogen deficient titanium aluminum nitride (Ti0.54AI0.46Ny) thin films by tuning the applied negative bias voltage“ Journal of Applied Physics 122 2017 255     published formated output
Y.H. Chen L. Rogstrm, J.J. Roa, J.Q. Zhu, I.C. Schramm, L.J.S. Johnson, N. sChell, F. Mcklich, M.J. Anglada, M. Odn „Thermal and mechanical stability of wurtzite-ZrAIN/cubic-TiN and wurzite-ZrAIN/cubic-ZrN multilayers“ Surface and Coatings Technology 324 2017 255     published formated output
J. Luo C. Hein, F. Mcklich, M. Solioz „Killing of bacteria by copper, cadmium, and silver surfaces reveals relevant physicochemical parameters“ Biointerphases 12 2017 2 020301   published formated output
M. Linz M.R. Ripoll, C. Gachot, C .Pauly, F. Franek, F. Mcklich „On the competition between plastic deformation and material detachment in ferritic/pearlitic steel under boundary lubrication“ Wear 376 2017   813-821   published formated output
S. Stanojevic I. Gallino, H. Aboulfadl, M. Sahin, F. Mcklich, R. Busch „Oxidation of glassy NiNbSn alloys and its influence on the thermodynamics and kinetics of crystallization“ Acta Materialia 102 2016   176-186   published formated output
M. Hans S. Mathews, F. Mcklich, M. Solioz „Physicochemical properties of copper important for its antibacterial activity and development of a unified model“ Biointerphases 11 2016     http://dx.doi.org/10.1116/1.4935853 published formated output
F. Lasserre A. Rosenkranz, N. Souza Carmona, M. Roble, E. Ramos-Moore, D.E. Diaz-Droguett „Simultaneous deposition of carbon nanotubes and decoration with gold-palladium nanoparticles by laser induced forward transfer“ Applied Physics A 122 2016   p. 150 DOI: 10.1007/s00339-016-9682-x published formated output
A. Rosenkranz M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mcklich „Direct Laser Interference Patterning: Tailoring of Contact Area for Frictional and Antibacterial Properties“ Lubricants 4 2016 2 1-15   published formated output
M. Alishahi F. Mahboubi, S.M. Mousavi Khoie, M. Aparicio, R. Hbner, F. Soldera, R. Gago „Electrochemical behavior of nanocrystalline Ta/TaN multilayer on 316L stainless steel: Novel bipolar plates for proton exchange membrane fuel-cells“ Journal of Power Sources 322 2016   1-9 dx.doi.org/10.1016/jpowsour.2016.04133 published formated output
T. Dahmen M. Engstler, C. Pauly, P. Trampert, N. de Jonge, F. Mcklich, P. Slusallek „Feature Adaptive Sampling for Scanning Electron Microscopy“ Scientific Reports Nature Publishing Group   2016     DOI: 10.1038/srep25350 published formated output
S. Bagherifard S. Slawik, I. Fernndez-Pariente, C. Pauly, F. Mcklich, M. Guagliano „Nanoscale surface modification of AISI 316L stainless steel by severe shot peening“ Materials & Design 102 2016   68-77 doi:10.1016/j.matdes.2016.03.162 published formated output
S.A. Brinkmann M. Frensemeier, C.M. Laursen, H.J. Maier, D.Britz, A.S. Schneider, F. Mcklich, C.P. Frick „Effect of Indentation Temperature on Nickel-Titanium Indentation-Induced Two-Way Shape-Memory Surfaces“ Materials Science & Engineering A   2016     doi: http://dx.doi.org/10.1016/j.msea.2016.08.036 accepted formated output
M.J. Morn A.M. Cond, F. Soldera, M. Sirena, N. Haberkorn „Martensitic transformation in freestanding and supported CuAlNi thin films obtained at low deposition temperatures“ Materials Letters 184 2016   177-180 http://dx.doi.org/10.1016/j.matlet.2016.08.027 published formated output
I. C. Schramm M. P. Johansson Jesaar, J. Jensen, F. Mcklich, M. Odn „Impact of nitrogen vacancies on the high temperature behavior of (Ti1-xAlx)Ny alloys“ Acta Materialia 119 2016   218-228   published formated output
Y. Motemani D. Khare, A. Savan, M. Hans, A. Paulsen, J. Franzel, C. Somsen, F. Mcklich, G. Eggeler, A. Ludwig „Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition“ Nanotechnology 27 2016   495604   published formated output
K. Yalamanchili F. Wang, H. Aboulfadl, J. Barrirero, L. Rogstrm, E. Jimnez-Pique, F. Mcklich, F. Tasnadi, M. Odn, N. Ghafoor „Growth and thermal stability of TiN/ZrAlN: Effect of internal interfaces“ Acta Materialia 121 2016   396 - 406 doi:10.1016/j.actamat.2016.07.006 published formated output
P. Domenichini A.M. Cond, F. Soldera, M.Sirena, N. Haberkorn „Influence of the microstructure on the resulting 18R martensitic transformation of polycrystalline Cu-Al-ZN thin films obtained by sputtering and reactive annealing“ Materials Characterization 114 2016   289-295 DOI: 10.1016/j.matchar.2016.03.008 accepted formated output
C. Gachot A. Rosenkranz, S.M. Hsu, H.L. Costa „A Critical Assessment of Surface Texturirng: Current Understandings“ Wear   2016     Invited Review Article accepted in Wear 29.11.2016 accepted formated output
A. Rosenkranz M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mcklich „Laser Surface Patterning - Tailoring of Contact Area for Frictional and Antibacterial Properties“ Lubricants 4 2016   15 Accepted in Lubricants 19.01.2016; doi:10.3390/lubricants4010002 published formated output
S. Fang L. Llanes, M. Engstler, D. Bhre, F. Soldera, F. Mcklich „Surface Topography Quantification of Super Hard Abrasive Tools by Laser Scanning Microscopy“ Materials Performance and Characterization 5 2016 5 796-815   published formated output
D. Britz A. Hegetschweiler, M. Roberts, F. Mcklich „Reproducible Surface Contrasting and Orientation Correlation of Low-Carbon Steels by Time-Resolved Beraha Color Etching“ Materials Performance and Characterization 5 2016 5 553 - 563   published formated output
J. Barrirero J. Li, M. Engstler, N. Ghafoor, P. Schumacher, M. Odn, F. Mcklich „Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys“ Scripta Materialia 117 2016   16-19 DOI: 10.1016/j.scriptamat.2016.02.018 published formated output
F. Wang I.A. Abrikosov, S. Simak, M. Odn, F. Mcklich, F. Tasndi „Coherency effects on the mixing thermodynamics of cubic Ti1-xAlxN/TiN(001) multilayers“ Physical Review B 93 2016   174201   published formated output
N. Shulumba O. Hellman, Z. Raza, B. Alling, J. Barrirero, F. Mcklich, I.A. Abrikosov, M. Odn „Lattice Vibrations Change the Solid Soubility of an Alloy at High Temperatures“ Phy. Rev. Lett. 117 2016   205502   published formated output
T. Jung L. Kreiner, C. Pauly, F. Mcklich, A.M. Edmonds, M. Markham, C. Becher „Reproducible fabrication and characterization of diamond membranes for photonic crystal cavities“ Physica Status Soldi (a) 213 2016 12 3254-3264   published formated output
T. Dahmen N. de Jonge, P. Trampert, M. Engstler, C. Pauly, F. Mcklich, P. Slusallek „"Smart Microscopy" Feature based adaptive ampling for Forcused Ion Beam Scanning Electron Microscopy“ Microscopy and Microanalysis 22 2016   632   published formated output
A. Bachmaier H. Aboulfadl, M. Pfaff, F. Mcklich, C. Motz „Structural evolution and strain induced mixing in CuCo composites studied by transmission electron microscopy and atom probe tomography“ Materials Characterization 100 2015   178-191 DOI: 10.1016/j.matchar.2014.12.022 published formated output
J. H. Li J. Barrirero, M. Engstler, H. Aboulfadl, F. Mcklich, P. Schumacher „Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition“ Metallurgical and Materials Transactions A 46 2015 3 1300-1311 DOI: 10.1007/s11661-014-2702-6 published formated output
M. Martinez Mir M. Veith, J. Lee, F. Soldera, F. Mcklich, R. Bennewitz, C. Aktas „3D and 2D structural characterization of 1D Al/Al2O3 biphasic nanostructures“ Journal of Microscopy 258 2015 2 113-118 DOI: 10.1111/jmi.12221 published formated output
K. Yalamanchili I.C. Schramm, E. Jimnez-Piqu, L. Rogstrm, F. Mcklich, M. Odn, N. Ghafoor „Tuning hardness and fracture resistance of ZrN/Zr0.63Al0.37N nanoscale multilayers by stress-induced transformation toughening“ Acta Materialia 89 2015   22-31 DOI:10.1016/j.actamat.2015.01.066 published formated output
A. Bachmaier M. Pfaff, M. Stolpe, H. Aboulfadl, C. Motz „Phase separation of a supersaturated nanocrystalline Cu-Co alloy and its influence on thermal stability“ Acta Materialia 96 2015   269-283 doi:10.1016/j.actamat.2015.05.053 published formated output
K.E. Trinh A. Tsipenyuk, M. Varenberg, A. Rosenkranz, N. Souza, F. Mcklich „Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting“ Wear 344-345 2015   86-98 doi:10.1016/j.wear.2015.10.010 published formated output
G. Grass M. Hans, F. Mcklich, M. Solloz, C. Rensing „Massive Kupferwerkstoffe in der Hygiene und Infektionsprvention“ Hygiene&Medizin 40 2015 11 458-463   published formated output
Mcklich, F. Engstler, M., Britz, D., Barrirero, J., Rossi, P. „Why We Need All Dimensions to Solve Both Very Old and Very New Questions in Materials at the Micro-, Nano- and Atomic Scales“ Practical Metallography 52 2015 9 507-524 doi: 10.3139/147.110360 published formated output
E. Dalibn D. Heim, C. Forsich, A. Rosenkranz, M.A. Guitar „Characterization of thick and soft DLC coatings deposited on plasma nitrided austenitic stainless steel“ Diamond and Related Materials 59 2015   73-79 doi: 10.1016/j.diamond.2015.09.010 published formated output
Rossi, P. Engstler, M., Mcklich, F. „Quantitative Classification and Assessment of Sr Modification in Hypoeutectic Al-Si and Al-Si-Mg Alloys“ Practical Metallography 52 2015 10 571-589 doi: 10.3139/147.110361 published formated output
Holzapfel, C. Pauly, C. Engstler, M., Mcklich, F. „Electron beam characterization techniques for the study of wear in sliding contacts“ Electrical Contacts (Holm), 2015 IEEE 61st Holm Conference on Electrical Contacts   2015   227-234 doi: 10.1109/HOLM.2015.7355102 published formated output
K. Trinh E. Ramos-Moore, I. Green, C. Pauly, M. Zamanzade, F. Mcklich „Topographical and Microstructural Effects of Laser Surface Texturing on Tin-coated Copper Electrical Connectors under Load Cycling“ IEEE Transactions on Components, Packaging and Manufacturing Technology   2015       accepted formated output
Dalibn, E.L. Guitar, M.A., Trava-Airoldi, V., Mcklich, F., Brhl, S.P. „Plasma nitriding and DLC coatings for corrosion protection of precipitation hardening stainless steel“ Advanced Engineering Materials 18 2015 5 826-832 DOI: 10.1002/adem.201500411 published formated output
L. Reinert M. Zeiger, S. Surez, V. Presser, F. Mcklich „Dispersion analysis of carbon nanotubes, carbon onions and nanodiamonds for their application as reinforcement phase in nickel metal matrix composites “ RSC Advances   2015   95149-95159 DOI: 10.1039/c5ra14310a published formated output
N. Souza M. Zeiger, V. Presser, F. Mcklich „In situ tracking of defect healing and purification of single-wall carbon nanotubes with laser radiation by time-resolved Raman spectroscopy“ RSC Advances 5 2015 76 62149 - 62159 doi:10.1039/C5RA09316C published formated output
J. Riedrich-Mller S. Pezzagna, J. Meijer, C. Pauly, F. Mcklich, M. Markham, A. Edmonds, C. Becher „Nanoimplantation and Purcell enhancement of single nitrogen-cacany center in photonic crystal cavities in diamond“ Applied Physics Letters 106 2015   221103   published formated output
P. Ferrari E. Ramos-Moore, M.A. Guitar, A.L. Cabrera „Raman analysis of ferroelectric switching in niobium-doped lead zirconate titanate thin films“ Thin Solid Films 556 2014   539-543 DOI: 10.1016/j.tsf.2014.02.050 published formated output
F.L. Miguel R. Mller, M. Weinmann, R. Hempelmann, S. Mathur, F. Mcklich „Production and characterization of nanocomposite thin films based on Ni matrix reinforced with SnO2 single-crystalline nanowires for electrical contact applications“ Journal of Alloys and Compounds 603 2014   14-18 DOI: 10.1016/j.jallcom.2014.03.066 published formated output
N. Haberkorn A.M. Cond, M. Sirena, F. Soldera, F.C. Lovey „Single crystalline β phase CuZn nanowires: Synthesis and martensitic transformation“ Materials Letters 124 2014   256260 DOI: 10.1016/j.matlet.2014.03.101 published formated output
J. Riedrich-Mller C. Arend, C. Pauly, F. Mcklich, M. Fischer, S. Gsell, M. Schreck, C. Becher „Deterministic coupling of a single silicon-vacancy color center to a photonic crystal cavity in diamond“ Nano Letters 14 2014 9 52815287 DOI: 10.1021/nl502327b published formated output
S.-M. Liang M. Engstler, V. Groten, J. Barrirero, F. Mcklich, A. Bhrig-Polaczek, R. Schmid-Fetzer „Key experiments and thermodynamic revision of the binary AlSr system“ Journal of Alloys and Compounds 610 2014   443-450 DOI: 10.1016/j.jallcom.2014.05.018 published formated output
J. Barrirero M. Engstler, N. Ghafoor, N. de Jonge, M. Odn, F. Mcklich „Comparison of segregations formed in unmodified and Sr-modified Al-Si alloys studied by atom probe tomography and transmission electron microscopy“ Journal of Alloys and Compounds 611 2014   410-421 DOI: 10.1016/j.jallcom.2014.05.121 published formated output
M. Hans J. C. Tmara, S. Mathews, B. Bax, A. Hegetschweiler, R. Kautenburger, M. Solioz, F. Mcklich „Laser cladding of stainless steel with a coppersilver alloy to generate surfaces of high antimicrobial activity“ Applied Surface Science 320 2014   195-199 DOI: 10.1016/j.apsusc.2014.09.069 published formated output
R. Forsén I. C. Schramm, P. O. Å. Persson, F. Mücklich, M. Odén, N. Ghafoor „Nanostructuring and coherency strain in multicomponent hard coatings“ APL Materials 2 2014     DOI: 10.1063/1.4901125 published formated output
Rossi, P. Engstler, M., Mcklich, F. „Homogeneity Quantification Method and its Application to Microstructure Assessment“ Practical Metalography 51 2014   180-199   published formated output
S. Mathews M. Hans, F. Mcklich, M. Solioz „Contact Killing of Bacteria on Copper Is Suppressed if Bacterial-Metal Contact Is Prevented and Is Induced on Iron by Copper Ions“ Applied and Environmental Microbiology 79 2013 8 2605-2611 DOI: 10.1128/AEM.03608-12 | PDF verfgbar published formated output
C. Gachot A. Rosenkranz, L. Reinert, E. Ramos-Moore, N. Souza, M. Mser, F. Mcklich „Dry friction between laser-patterned surfaces: Role of alignment, structural wavelength and surface chemistry“ Tribology Letters 49 2013 1 193-202 DOI: 10.1007/s11249-012-0057-y | PDF verfgbar published formated output
D. S. Rodrguez P. A. Arboleda, D. O. Russo, F. Soldera, C. J. R. Gonzlez-Oliver, J. M. Rincn „Thermal behaviour of iron aluminium phosphate glasses containing UO267“ Glass Technology - European Journal of Glass Science and Technology Part A 54 2013 3 111-118   published formated output
B. Bax M. Schfer, C. Pauly, F. Mcklich „Coating and prototyping of single-phase iron aluminide by laser cladding“ Surface and Coatings Technology 235 2013   773-777 DOI: 10.1016/j.surfcoat.2013.09.001 | PDF vorhanden published formated output
N. Prodanov C. Gachot, A. Rosenkranz, F. Mcklich, M.H. Mser „Contact mechanics of laser-textured surfaces: Correlating contact area and friction“ Tribology Letters 50 2013   41-48 DOI: 10.1007/s11249-012-0064-z published formated output
A. Knutsson I.C. Schramm, k. Asp Grnhagen, F. Mcklich, M. Odn „Surface directed spinodal decomposition at TiAlN/TiN interfaces“ Journal of Applied Physics 113 2013     DOI: 10.1063/1.4795155, Article Number 114305 published formated output
M. Hans A. Erbe, S. Mathews, Y. Chen, M. Solioz, F. Mcklich „Role of Copper Oxides in Contact Killing of Bacteria“ Langmuir 29 2013   16160-16166 DOI 10.1021/la404091z | PDF vorhanden published formated output
D. Horwat M. Dehmas, A. Gutirrez, J.-F. Pierson, A. Anders, F. Soldera, J.-L. Endrino „Efficient, Low Cost Synthesis of Sodium Platinum Bronze NaxPt3O4“ Chemistry of Materials 24 2012 13 2429-2432 DOI: dx.doi.org/10.1021/cm301179x | PDF verfgbar published formated output
E. Jimnez-Piqu A. Ramos, J. A. Muoz-Tabares, A. Hatton, F. Soldera, F. Mcklich, M. Anglada „Focused ion beam tomography of zirconia degraded under hydrothermal conditions“ Journal of the European Ceramic Society 32 2012 10 2129-2136 DOI:10.1016/j.jeurceramsoc.2012.02.011 | PDF verfgbar published formated output
B. Raillard C. Gachot, M. Hans, P. Leibenguth, F. Mcklich „Microstructural characterization of laser-irradiated bulk copper under dry sliding conditions“ Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226 2012 6 541-551 DOI: 10.1177/1350650112440924 | PDF verfgbar published formated output
J. Riedrich-Mller L. Kipfstuhl, C. Hepp, E. Neu, C. Pauly, F. Mcklich, A. Baur, M. Wandt, S. Wolff, M. Fischer, S. Gsell, M. Schreck, C. Becher „One- and two-dimensional photonic crystal microcavities in single crystal diamond“ Nature Nanotechnology 7 2012   69-74 DOI:10.1038/nnano.2011.190 | PDF verfgbar published formated output
D. Acevedo E. Frontera, M. Broglia, F. Mcklich, C. Miras, C. Barbero „One Step Lithography of Polypyrrole“ Advanced Engineering Materials 13 2011 5 405-410 DOI: 10.1002/adem.201000295 published formated output
A. Hatton M. Engstler, P. Leibenguth, F. Mcklich „Characterization of Graphite Crystal Structure and Growth Mechanisms Using FIB and 3D Image Analysis“ Advanced Engineering Materials 13 2011 3 136-144 DOI: 10.1002/adem.201000234 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mcklich „Advanced Microstructural Analysis of Ferrite Materials by Means of Electron Backscatter Diffraction (EBSD)“ Journal of Magnetism and Magnetic Materials 322 2010 9 11781181 presentation at JEMS08, September 14-19, 2008, Dublin, Ireland | DOI: 10.1016/j.jmmm.2009.06.073 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, C. L. Teng, M. P. Ryan, U. Hartmann, F. Mcklich „EBSD Analysis of Electroplated Magnetite Thin Films“ Journal of Magnetism and Magnetic Materials 322 2010 9 1235-1238 presentation at JEMS08 , September 14-19, 2008, Dublin, Ireland | DOI: 10.1016/j.jmmm.2009.03.028 | PDF verfgbar published formated output
F. Mller C. Zeitz, H. Mantz, K.-H. Ehses, F. Soldera, J. Schmauch, M. Hannig, S. Hfner, K. Jacobs „Elemental Depth Profiling of Fluoridated Hydroxyapatite: Saving Your Dentition by the Skin of Your Teeth?“ Langmuir 26 2010 24 18750-18759 DOI: 10.1021/la102325e | PDF verfgbar published formated output
F. Lasagni A. Lasagni, C. Holzapfel, M. Engstler, F. Mcklich „3D Microstructural Study of AlSi8Mg5 Alloy by FIB-Tomography“ Practical Metallography 47 2010 9 487-499 DOI: 10.3139/147.110088 published formated output
F. Mcklich M. Engstler „Microstructure Tomography in the Micro, Nano and Atomic scale Advanced Access to Understand Local Formation as well as Degradation of Materials Microstructure“ Microscopy and Microanalysis 16 2010 2 688-689 DOI: 10.1017/S1431927610063154 | PDF verfgbar published formated output
F. Mcklich M. Engstler „Gefgetomografie mit Ionen- und Elektronenstrahlen: Ein Werkzeug zur Klrung komplexer Gefgebildung und lokaler Gefgedegradation“ Journal of Heat Treatment of Materials 64 2009 5 262-269 PDF verfgbar published formated output
F. G. Marro R. Chintapalli, P. Hvizdos, F. Soldera, F. Mcklich, M. Anglada „Study of Near Surface Changes in Yttria-doped Tetragonal Zirconia after Low Temperature Degradation“ International Journal of Materials Research 100 2009 1 92-96 PDF verfgbar published formated output
C. Gachot M. Hans, R. Catrin, U. Schmid, F. Mcklich „Tuned Wettability of Material Surfaces for tribological Applications in miniaturized Systems by Laser Interference Metallurgy“ Proc. of SPIE 7362 2009   73620U-1 DOI: 10.1117/12.821661 | PDF verfgbar published formated output
D. Acevedo A. Lasagni, M. Cornejo, M. Politano, C. Barbero, F. Mcklich „Large Area Fabrication of Tuned Polystyrene/Poly-methylmethacrylate Periodic Structures using Laser Interference Patterning“ Langmuir 25 2009 16 9624 DOI: 10.1021/la9007944 | PDF verfgbar published formated output
A. Koblischka-Veneva M. Koblischka, F. Mcklich „Ion Damage during FIB-milling of Magnetite“ Superlattices & Microstructures 44 2008   468-475 presented at E-MRS spring meeting 2007, Strasbourg, Symposium K, Nanoscale self-assembly and patterning published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mcklich, T. Qu, Z. Han „Study of Grain boundary Properties in Ag-clad Bi-2212 Tapes by Multi-phase Electron Backscatter Diffraction Analysis“ Journal of Physics: Conference Series 94 2008   012011 presented at E-MRS spring meeting 2007, Strasbourg, Symposium J, Interfacial nanostructures in ceramics: A multiscale approach | DOI: 10.1088/1742-6596/94/1/012011 c | PDF verfgbar published formated output
S. Getlawi M. Theis, S. Friedrich, A. Koblischka-Veneva, M. R. Koblischka, M. Saumer, U. Hartmann „Characterization of Electroplated, Thick Permalloy Films“ Physica Status Solidi A 205 2008 255   DOI: 10.1002/pssa.200723621; presented at the 3rd Seeheim conference on magnetism, Frankfurt, Germany, 26.8.-30.8.2007 | PDF verfgbar published formated output
M. R. Koblischka M. Kirsch, M. Brust, A. Koblischka-Veneva, U. Hartmann „Preparation of Thin Ferrite Films on Silicon Substrates“ Physica Status Solidi A 205 2008   1783-1786 presented at the 3rd Seeheim conference on magnetism, Frankfurt, Germany, 26.8.-30.8.2007 published formated output
A. Koblischka-Veneva F. Mcklich, M. R. Koblischka, U. Hartmann, S. Murphy, I. V. Shvets „Study of Cross-sections of Magnetite Thin Films by Means of Electron-backscatter Diffraction“ Physica Status Solidi A 205 2008   1835-1838 DOI: 10.1002/pssa.200723634; presented at the 3rd Seeheim conference on magnetism, Frankfurt, Germany, 26.8.-30.8.2007 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, T. Qu, Z. Han, F. Mcklich „Texture Analysis of Monofilamentary, Ag-sheathed (Pb,Bi)2Sr2Ca2Cu3Ox Tapes by Electron Backscatter Diffraction (EBSD)“ Physica C 463 2008 3 174-182 DOI: 10.1016/j.physc.2007.11.006 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, S. Murphy, F. Mcklich, I. V. Shvets „Microtexture of Magnetite Thin Films of (001) and (111) Orientation on MgO Substrates Studied by EBSD“ Journal of Applied Physics 103 2008 7 07E505 presented at the 52nd Magnetism and Magnetic Materials Conference, November 5-9, 2007, Tampa, USA | DOI: 10.1063/1.2837283 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Babu, F. Mcklich „EBSD Analysis of Melt-textured YBCO with Embedded Ag-2411 Nanoparticles“ Materials Science and Engineering B 151 2008 65   presented at 6th PASREG 2007, Cambridge, U.K., 13.9.-15.9.2007 | DOI:10.1016/j.mseb.2008.02.012 | PDF verfgbar published formated output
F. Lasagni A. Lasagni, M. Engstler, H. P. Degischer, F. Mcklich „Nano-characterization of Cast Structures by FIB-Tomography“ Advanced Engineering Materials 10 2008 1 62-66 DOI: 10.1002/adem.200700249 | PDF verfgbar published formated output
A. Lasagni M. Cornejo, F. Lasagni, F. Mcklich „Laser Ablation Modeling of Periodic Pattern Formation on Polymer Substrates“ Advanced Engineering Materials 10 2008 5 488-493 DOI: 10.1002/adem.200700323 | PDF verfgbar published formated output
Y. Gaillard E. Jimnez-Piqu, F. Soldera, F. Mcklich, M. Anglada „Quantification of Hydrothermal Degradation in Zirconia by Nanoindentation“ Acta Materialia 56 2008 16 4206-4216 DOI: 10.1016/j.actamat.2008.04.050 | PDF verfgbar published formated output
M. R. Koblischka M. Winter, P. Das, U. Hartmann, A. Koblischka-Veneva, F. Mcklich „Nanostripes in GdBa2Cu3Ox High-Tc Superconductors“ Materials Science and Engineering B 151 2008   74-78 DOI: 10.1016/j.mseb.2008.02.010 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, D. Lisjak, D. Makovec, F. Mcklich „Texture analysis of ferrite materials by means of electron backscatter diffraction (EBSD)“ IEEE Transactions on Magnetics   2008   1072 PDF verfgbar published formated output
M. R. Koblischka, M. Winter, A. Koblischka-Veneva, U. Hartmann „Nanoscale Flux Pinning Sites in High-Tc Superconductors“ International Journal of Condensed Matter, Advanced Materials and Superconductivity Research 6 2008   199-217   published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, F. Mcklich „Crystallographic Orientation of Y2Ba4CuMOx (M = Nb, Zr, Ag) Nanoparticles Embedded in Melt-Textured YBCO Studied by EBSD“ Journal of the American Ceramic Society 90 2007   2582-2588   published formated output
A. Koblischka-Veneva M. R. Koblischka, Y. Zhou, S. Murphy, F. Mcklich, U. Hartmann, I. V. Shvets „Electron Backscatter Diffraction Analysis Applied to (001) Magnetite Thin Films Grown on MgO Substrates“ Journal of Magnetism and Magnetic Materials 316 2007   e663-e665 presented at III JOINT EUROPEAN MAGNETIC SYMPOSIA, June 3026, 2006, San Sebastian, Spain published formated output
M. Winter M. R. Koblischka, A. Koblischka-Veneva, U. Hartmann „Nanostripe Structures in Light Rare Earth High Tc-Superconductors“ Journal of Physics: Conference Series 61 2007   601-605 presented at. ICN+T Conf., Basel, Switzerland, 2006 published formated output
A. Koblischka-Veneva M. Koblischka, J. Wei, Y. Zhou, S. Murphy, F. Mcklich, U. Hartmann, I.V. Shvets „Misorientations in [0 0 1] Magnetite Thin Films Studied by Electron Backscatter Diffraction and Magnetic Force Microscopy“ Journal of Applied Physics 101 2007   09M507 presented at the 10th Joint MMM/Intermag 2007, January 7-11, 2007, Baltimore, Maryland published formated output
C. Petersen A. Lasagni, C. Holzapfel, C. Daniel, F. Mcklich, M. Veith „SEM/TEM Characterization of Periodical Novel Amorphous/Nanocrystalline Micro-composites Obtained by Laser Interference Structuring: The System HAlO-AlAl2O3“ Applied Surface Science 253 2007   8022-8027   published formated output
C. Holzapfel W. Schf, M. Marx, H. Vehoff, F. Mcklich „Interaction of Cracks with Precipitates and Grain Boundaries: Understanding Crack Growth Mechanisms through Focused Ion Beam Tomography“ Scripta Materialia 56 2007   697-700   published formated output
A. Koblischka-Veneva F. Mcklich, M. R. Koblischka, U. Hartmann, Y. Zhou, S. Murphy, I.V. Shvets „EBSD Analysis of the Growth of [001] Magnetite Thin Films on MgO Substrates“ Materials Science and Engineering B 144 2007   64-68 presented at E-MRS spring meeting 2007, Strasbourg, Symposium H, Nanoscale tailoring of defect structures for optimized functional & multifunctional oxide films published formated output
A. Koblischka-Veneva M. R. Koblischka, S. Murphy, S. K. Arora, F. Mcklich, U. Hartmann, I. V. Shvets „Misorientations in [0 0 1] Magnetite Thin Films Studied by Electron Backscatter Diffraction“ Microscopy and Microanalysis 13 2007 3 362-363 presented at MC2007, 2.-7.9.2007, Saarbrcken, Germany published formated output
M. R. Koblischka M. Winter, A. Koblischka-Veneva, M. Muralidhar, F. Mcklich, U. Hartmann „Nanostripes in (Nd0.33Eu0.33Gd0.33)Ba2Cu3Ox superconductors“ Applied Physics Letters 91 2007   082508   published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Babu, D. A. Cardwell, F. Mcklich „EBSD-Analysis of Nanoparticles Embedded in High-Tc Superconductors“ Microscopy and Microanalysis 13 2007 3 360-361 presented at MC2007. 2.-7..9.2007, Saarbrcken, Germany published formated output
A. Lasagni M. DAlessandria, R. Giovanelli, F. Mcklich „Advanced Design of Periodical Architectures in Bulk Metals using Laser Interference Metallurgy“ Applied Surface Science 254 2007   930-936 DOI: 10.1016/j.apsusc.2007.08.010 | PDF verfgbar published formated output
F. Soldera Y. Gaillard, M. Anglada Gomila, F. Mcklich „FIB-Tomography of Nanoindentation Cracks in Zirconia Polycrystals“ Microscopy and Microanalysis 13 2007 2 1510-1511 DOI: 10.1017/S1431927607075654 | PDF verfgbar published formated output
S. Getlawi M. R. Koblischka, F. Soldera, U. Hartmann „Structuring of Permalloy by means of Electron-beam Lithography and Focused Ion Beam Milling“ Microscopy and Microanalysis 13 2007 3 358-359 DOI: 10.1017/S1431927607081792 | PDF verfgbar published formated output
A. Lasagni M. Nejati, R. Clasen, F. Mcklich „Periodical Surface Structuring of Metals by Laser Interference Metallurgy as a New Fabrication Method of Textured Solar Selective Absorbers“ Advanced Engineering Materials 6 2006 8 580-584 DOI: 10.1002/adem.200500261 | PDF verfgbar published formated output
J. Rager A. Nagel, M. Schwenger, A. Flaig, G. Schneider, F. Mcklich „Platinum Ceramic Composites as New Electrode Materials: Fabrication, Sintering, Microstructure and Properties“ Advanced Engineering Materials 8 2006 1 81-88 DOI: 10.1002/adem.200500192 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, F. Mcklich „Embedded Y2Ba4CuNbOx Nanoparticles in Melt-Textured YBCO Studied by Means of EBSD“ Physica C 445-448 2006   379-381 DOI: 10.1016/j.physc.2006.04.022 | PDF verfgbar published formated output
A. Koblischka-Veneva F. Mcklich, M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, M. Murakami „Grain Orientations and Distribution of Y2Ba4CuUOx Phase in Melt-Textured YBCO with Addition of Depleted Uranium Oxide Studied by EBSD“ Superconductor Science and Technology 19 2006   567-571 DOI: 10.1088/0953-2048/19/7/S28 | PDF verfgbar published formated output
A. Koblischka-Veneva F. Mcklich, M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, L. Shlyk, G. Krabbes „An Electron Backscatter Diffraction Investigation of Crystallographic Orientations of Embedded Nanoparticles within Melt-textured YBCO High Temperature Superconductors“ Superconductor Science and Technology 19 2006   562-566 DOI: 10.1088/0953-2048/19/7/S27 | PDF verfgbar published formated output
A. Koblischka-Veneva F. Mcklich, M. R. Koblischka, N. Hari Babu, D. A. Cardwell „EBSD Characterisation of Y2Ba4CuUOx Phase in Melt-textured YBCO with Addition of Depleted Uranium Oxide“ Journal of Physics: Conference Series 43 2006   438-441 DOI: 10.1088/1742-6596/43/1/109 | PDF verfgbar published formated output
A. Koblischka-Veneva C. Holzapfel, F. Mcklich, M. R. Koblischka, N. Hari Babu, D. A. Cardwell „Investigation of Grain Orientations of Melt-textured HTSC with Additions of Uranium Oxide, Y2O3 and Y2BaCuO5“ Journal of Physics: Conference Series 43 2006   527-530 DOI: 10.1088/1742-6596/43/1/130 | PDF verfgbar published formated output
M. R. Koblischka M. Winter, U. Hartmann, A. Koblischka-Veneva, N. Hari Babu, D. A. Cardwell „Analysis of Melt-textured YBCO with Nanoscale Inclusions“ Journal of Physics: Conference Series 43 2006   522-526 DOI: 10.1088/1742-6596/43/1/129 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mcklich, Y. Zhou, S. Murphy, I.V. Shvets „Crystallographic Orientation Analyses of Magnetite Thin Films Using Electron Backscatter Diffraction (EBSD)“ IEEE Transactions on Magnetics 42 2006   2873-2875   published formated output
A. Lasagni M. Seyler, C. Holzapfel, W. F. Maier, F. Mcklich „Periodical Gratings in Mixed Oxide Films by Laser Interference Irradiation“ Advanced Materials 17 2005   2228-2232 DOI: 10.1002/adma.200402074 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mcklich, N. Hari Nabu, D.A. Cardwell, M. Murakami „Comparative Study of Grain Orientation in Melt-Textured HTSC with Different Additions“ Physica C 426-431 2005   618-624 DOI: 10.1016/j.physc.2005.01.064 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mcklich, M. Murakami „OIM and X-Ray Texture Analysis of Melt-Textured YBCO Superconductors“ Physica Status Solidi C 2 2005   1708 DOI: 10.1002/pssc.200460816 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, F. Mcklich, M. Murakami „Orientation of Embedded Y2BaCuO5 Particles within the YBa2Cu3Ox Matrix in Melt-Textured YBCO Superconductors“ Physica Status Solidi C 2 2005   1714 DOI: 10.1002/pssc.200460817 | PDF verfgbar published formated output
F. Yu F. Mcklich, P. Li, H. Shen, S. Mathur, C.-M. Lehr, U. Bakowsky „In Vitro Cell Response to Polymer Surface Micropatterned by Laser Interference Lithography“ Biomacromolecules 6 2005   1160-1167 DOI: 10.1021/bm049324w | PDF verfgbar published formated output
N. Ilic F. Soldera, F. Mcklich, M. T. Jovanovic „Oxidation Behavior of Ru(Al)-RuAl Intermetallic Eutectics Produced by Ingot and Powder Metallurgy“ Intermetallics 13 2005 5 444-453 DOI: 10.1016/j.intermet.2004.06.010 | PDF verfgbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mcklich, K. Ogasawara, M. Murakami „Interactions of Y2BaCuO5 Particles and the YBCO Matrix within Melt-Textured YBCO Samples Studied by Means of EBSD“ Superconductor Science and Technology 18 2005   158-163 DOI: 10.1088/0953-2048/18/2/032 | PDF verfgbar published formated output
F. Yu P. Li, H. Shen, S. Mathur, C.-M. Lehr, U. Bakowsky, F. Mcklich „Laser Interference Lithography as a New and Efficient Technique for Micropatterning of Biopolymer Surface“ Biomaterials 26 2005 15 2307-2312 DOI: 10.1016/j.biomaterials.2004.07.021 | PDF verfgbar published formated output
A. Koblischka-Veneva M R. Koblischka, K. Ogasawara, F. Mcklich, M. Murakami „Interplay of YBCO and Embedded 211 Particles in Melt-Textured YBCO“ Journal of Superconductivity 18 2005 4 469-474 DOI: 10.1007/s10948-005-0027-9 | PDF verfgbar published formated output
K. Ogasawara N. Sakai, M. Koblischka, A. Koblischka-Veneva, M. Murakami „Effects of Subgrains on Critical Current Properties in Melt-processed REBaCuO Bulk Superconductors“ Superconductor Science and Technology 17 2004   61-65   published formated output
A. Koblischka-Veneva M. R. Koblischka, K. Ogasawara, F. Mcklich, M. Murakami „Position-dependent Texture Analysis of Melt-textured YBCO by Means of Electron Backscatter Diffraction“ Physica C 392 2003   607-612   published formated output
M. R. Koblischka A. Koblischka-Veneva, E.S. Reddy, G. J. Schmitz, K. Ogasawara, M. Murakami „Orientations of Y2BaCuO5 and YBCO within Melt-textured and Directional Solidified Samples Studied by EBSD“ Physica C 392 2003   589-595   published formated output
A. Koblischka-Veneva M. R. Koblischka „Microstructural Studies of K2CO3 and Rb2CO3 Doped YBCO HTSC“ Physica C 392 2003   596-600   published formated output
K. Ogasawara N. Sakai, A. Koblischka-Veneva, M. R. Koblischka, M. Murakami „Subgrain Structures and Superconductivity in RE-Ba-Cu-O Bulk Superconductors“ Physica C 386 2003   225-230   published formated output
P. Li U. Bakowsky, F. Yu, C. Loehbach, F. Mcklich, C. M. Lehr „Laser Ablation Patterning by Interference Induces Directional Cell Growth“ IEEE Transactions on Nanobioscience 2 2003 9 138-145   published formated output
J. Fiscina M. Ohligschlger, F. Mcklich „W-Cu Graded Alloys Produced by Size Segregation of Agglomerates Induced by Vertical Vibration at High Frequencies“ Journal of Materials Science Letters 22 2003   1455-1457   published formated output
N. Ilic R. Rein, M. Gken, M. Kempf, F. Soldera, F. Mcklich „Properties of Eutectic Ru-Al Alloy Produced by Ingot Metallurgy“ Materials Science and Engineering A   2002   38-44 PDF verfgbar published formated output
A. Koblischka-Veneva F. Mcklich, M. R. Koblischka „A Study of Grain Orientation of Alkali Doped Polycrystalline YBCO Ceramics using an EBSD Technique“ Crystal Engineering 5 2002   411-418   published formated output
A. Koblischka-Veneva M. R. Koblischka, K. Ogasawara, F. Mcklich, M. Murakami „Orientation Imaging Microscopy Analysis of Bulk, Melt-textured YBCO Superconductors“ Crystal Engineering 5 2002   265-272   published formated output
A. Koblischka-Veneva M. R. Koblischka, P. Simon, F. Mcklich, M. Murakami „Application of Electron Backscatter Diffraction to Bulk High-TC Superconductors“ Superconductor Science and Technology 15 2002   796-802   published formated output
A. Koblischka-Veneva M. R. Koblischka, P. Simon, F. Mcklich, M. Murakami „Electron Backscatter Diffraction Study of Polycrystalline Yba2Cu3O7-x Ceramics“ Physica C 382 2002   311-322   published formated output
D. Katrakova M. Damgaard, F. Mcklich „Preparation for Electron Backscatter Diffraction with LaboPol-4 / LaboForce-1“ Structure 38 2001   19-24   published formated output
A. Koblischka-Veneva M. R. Koblischka, M. Murakami „Magneto-Optical and Microstructural Investigations on KCIO3-Doped YBCO HTSC“ Physica   2001   201-204   published formated output
F. Soldera M. Sierra Rota, N. Ilic, F. Mcklich „Quantification of Localised Loss of Material“ Practical Metallography 37 2000 9 477-486 PDF verfgbar published formated output
F. Mcklich S. Hartmann, M. J. Hoffmann, G. A. Schneider, J. Ohser, G. Petzow „Quantitative Description of Silicon Nitride Microstructures“ Key Engineering Materials   1994   465-469   published formated output
A.F. Lasagni C. Gachot, K.E.Trinh, M. Hans, A. Rosenkranz, T. Roch, S. Eckhardt. T. Kunze, M. Bieda, D. Gnther, V. Lang, F. Mcklich „Direct laser interference patterning, 20 years of development: From the basics to industrial applications“ Proc. SPIE 10092, Laser-based Micro- and Nanoprocessing XI 1009211     doi: 10.1117/12.2252   published formated output



view full database







Publica (build 111206), (c) Lehrstuhl für Funktionswerkstoffe, Universität des Saarlandes, 2006. Konzept und Betreuung: Daniel Henry. Datenschutz, Impressum