Stand: 3.7.2018, 11:23



Benutzername: Passwort:


aktuelle Anzeige: Publications (peer-review), Eingrenzung: Co-Autor, Sortierung nach: Jahr - view full database
Vol
Jahr
No.
Seiten
 
E. Roitero M. Ochoa, M. Anglada, F. Mücklich, E. Jiménez-Piqué „Low temperature degradation of laser patterned 3Y-TZP: Enhancement of resistance after thermal treatment“ Journal of the European Ceramic Society 38 2018   1742-1749 10.1016/j.jeurceramsoc.2017.10.044 published formated output
E. Ramos-Moore P. Leibenguth, S. Slawik, R.S.Coelho, D. Horwat, S. Migot, B. Lechthaler, F. Mücklich „Estimation of residual stresses in perovskite fims for capacitor applications“ Thin Solid Films 648 2018   21-25   published formated output
S.M. Azimi D. Britz, M. Engstler, M. Fritz, F. Mücklich „Advanced Steel Microstructural Classification by Deep Learning Methods“ Scientific Reports 8 2018 1 2128   published formated output
E. Roitero F. Lassere, M. Anglada, F. Mücklich, E. Jiménez-Piqué „A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality“ Dental Materials 33 2017   pp. e28-e38   published formated output
L. Reinert F. Lasserre, C. Gachot, P. Grützmacher, T. MacLucas, N. Souza, F. Mücklich, S. Suarez „Long-lasting solid lubrication by CNT-coated patterned surfaces“ Scientific Reports 7 2017   42873 Doi: 10.1038/srep42873 published formated output
N. Souza M. Roble, D. E. Diaz-Droguett, F. Mücklich „Scaling up single-wall carbon nanotube laser annealing: effect on electrical resistance and hydrogen adsorption“ RSC Advances 7 2017 9 5084 - 5092 doi:10.1039/C6RA27794B published formated output
F. Forouzan S. Gunasekaran, Al Hedayati, E. Vuorinen, F. Mücklich „Microstructure analysis and mechanical properties of low alloy high strength quenched and partitioned steel“ Solid State Phenomena 258 2017   574 - 578   published formated output
A. Torge P. Grützmacher, F. Mücklich, M. Schneider „The influence of mannitol on morphology and disintegration of spray-dried nano-embedded microparticles“ European Journal of Pharmaceutical Sciences 104 2017   171 - 179 DOI: 10.1016/j.ejps.2017.04.003 published formated output
A.E. Giba P. Pigeat, S. Bruyere, H. Rinnert, F. Soldera, F. Mücklich, R. Gago, D. Horwat „Strong Room Temperature Blue Emission from Rapid Thermal Annealed Cerium-Doped Aluminium“ ACS Photonics 4 2017   1945-1953 DOI: 10.1021/acsphotonics.7b00233 published formated output
R. Schieber F. Lasserre, M. Hans, M. Fernández-Yagüe, M. Diaz-Ricart, G. Escolar, M. Ginebra, F. Mücklich, M. Pegueroles „Direct Laser Interference Patterning of CoCr Alloy Surfaces to Control Endothelial Cell and Platelet Response for Cardiovascular Applications“ Advanced Health Care Materials   2017     DOI: 10.1002/adhm.201700327 published formated output
Y. Wang J. Ghanbaja, S. Bruyère, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Room temperature self-assembled growth of vertically aligned columnar copper oxide nanocomposite thin films on unmatched substrates“ Scientific Reports 7   2017   1-9 DOI:10.1038/s41598-017-10540-6 published formated output
A. Ababneh A. N. Al-Omari, A. M. K. Dagamseh, M. Tantawi, C. Pauly, F. Mücklich, D. Feili, H. Seidel „Electrical and morphological characterization of platinum thin-films with various adhesion layers for high temperature applications“ Microsystem Technologies 23 2017 3 703-709   published formated output
J. J. Roa H. Aboulfadl, J. Barrirero, M. Turon-Vinas, F. Mücklich, M. Anglada „Chemical segregation in a 12Ce-ZrO2/3Y-ZrO2 cermanic composite“ Mater. Charact. 132 2017   83-91   published formated output
P.K. Yalamanchili F. Wang, I. Schramm, J.M. Andersson, M.P.J. Joesaar, F. Tasnádi, F. Mücklich, N. Ghafoor, M. Odén „Exploring the high entropy alloy concept in (AlTiVNbCr)N“ Thin Solid Films 636 2017   346-352   published formated output
S. Fang L. Llanes, S. Klein, C. Gachot, A. Rosenkranz, D. Bähre, F. Mücklich „Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser“ IOP Conference Series: Materials Sience and Engineering 258 2017   1-6 DOI: 10.1088/1757-899X/258/1/012006 published formated output
K.M. Calamba I.C. Schramm, M.P. Johansson Joesaar, J. Ghanbaja, J.F. Pierson, F. Mücklich, M. Odén „Enhanced thermal stability and mechanical properties of nitrogen deficient titanium aluminum nitride (Ti0.54AI0.46Ny) thin films by tuning the applied negative bias voltage“ Journal of Applied Physics 122 2017 255     published formated output
Y.H. Chen L. Rogström, J.J. Roa, J.Q. Zhu, I.C. Schramm, L.J.S. Johnson, N. sChell, F. Mücklich, M.J. Anglada, M. Odén „Thermal and mechanical stability of wurtzite-ZrAIN/cubic-TiN and wurzite-ZrAIN/cubic-ZrN multilayers“ Surface and Coatings Technology 324 2017 255     published formated output
D. Britz J. Webel, J. Gola, F. Mücklich „A Correlative Approach to Capture and Quantify Substructures by Means of Image Registration“ Practical Metallography 54 2017 10 685-696   published formated output
A. Rosenkranz A. Szurdak, P. Grützmacher, G. Hirt, F. Mücklich „Friction reduction induced by elliptical surface patterns under lubricated conditions“ Advanced Engineering Materials   2017 255 1-7 DOI: 10.1002/adem.20170031 published formated output
E. Raoms-Moore A. Rosenkranz, L.F.Matamala, A. Videla, A. Duran, J. Ramos-Grez „Effect of Surface Etsching and Electrodeposition of Copper on Nitinol“ IOP Conference Series: Materials Science and Engineering 258 2017   1-9   published formated output
C.J. Hsu A. Stratmann, A. Rosenkranz, C. Gachot „Enhanced growth of ZDDP based tribofims on laser-interference patterned cylinder roller bearings“ Lubricants 5 2017 39 doi:10.3390/lubrican   published formated output
S. Bettscheider P.G. Grützmacher, A. Rosenkranz „Low friction and high solid-solid contactratio - a contradiction for laser-patterened surfaces?“ Lubricants 5 2017 35   doi:10.3390/lubricants5030035 published formated output
P.G. Grützmacher A. Rosenkranz, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich „Effects of Multi-Scale Patterning on the Run-In Behavior of Steel-Alumina Pairings under Lubricated Conditions“ Advanced Engineering Materials   2017 255   DOI: 10.1002/adem.201700521 published formated output
P.G. Grützmacher A. Rosenkranz, S. Rammacher, C. Gachot, F. Mücklich „The influence of centrifugal forces on friction and wear in rotational sliding“ Tribology International 116 2017   256-263 DOI: 10.1016/tribol.2017.07.021 published formated output
S. Stanojevic I. Gallino, H. Aboulfadl, M. Sahin, F. Mücklich, R. Busch „Oxidation of glassy Ni–Nb–Sn alloys and its influence on the thermodynamics and kinetics of crystallization“ Acta Materialia 102 2016   176-186   published formated output
F. Lasserre A. Rosenkranz, N. Souza Carmona, M. Roble, E. Ramos-Moore, D.E. Diaz-Droguett „Simultaneous deposition of carbon nanotubes and decoration with gold-palladium nanoparticles by laser induced forward transfer“ Applied Physics A 122 2016   p. 150 DOI: 10.1007/s00339-016-9682-x published formated output
A. Rosenkranz A. Stratmann, C. Gachot, G. Burghardt, G. Jacobs, F. Mücklich „Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three Beam Laser Interference“ Advanced Engineering Materials 18 2016 5 854-862 DOI: 10.1002/adem.201500320 published formated output
S. Fang, T. Herrmann, A. Rosenkranz, C. Gachot, F.G. Marro, F. Mücklich, L. Llanes, D. Bähre „Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts“ Procedia CIRP   2016   439-443   published formated output
A. Rosenkranz A. Szurdak, C. Gachot, G. Hirt, F. Mücklich „Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns“ Tribology International 95 2016   290-297 DOI:10.1016/j.triboint.2015.11.035 published formated output
S. Fang A. Rosenkranz, F.G. Marro, C. Gachot, L.Llanes, D. Bähre, F. Mücklich „Surface Modification of Cemented Tungsten Carbide (Wc-Co) by Ultra-Short Pulse Laser Processing and its Tribological Properties“ 7th International Conference on Tribology in Manufacturing Processes   2016       accepted formated output
A. Rosenkranz M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mücklich „Direct Laser Interference Patterning: Tailoring of Contact Area for Frictional and Antibacterial Properties“ Lubricants 4 2016 2 1-15   published formated output
A. Rosenkranz P. Grützmacher, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich „Synergetic effect of laster patterning and micro coining for controlled lubricant propagation“ Surface Topography: Metrology and Properties, Special Issue   2016       submitted formated output
P. Grützmacher A. Rosenkranz, C. Gachot „How to Guide Lubricants - Tailored Laser Surface Patterns on Stainless Steel“ Applied Surface Science 370 2016   59-66 DOI: 10.1016/j.apsusc.2016.02.115 published formated output
Li, J.H. Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F., Schumacher, P. „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia 108 2016   207 - 218 doi:10.1016/j.actamat.2016.01.053 published formated output
A.I. Kovalev A. Rashkovskiy, Yu., D. L. Wainstein, R. Gago, F. Soldera, J. L. Endrino „Influence of electronic structure, plasmon-phonon and plasmon-polariton excitations on anomalously low heat conductivity in TiAlN/Ag nanoscale multilayer coatings“ Current Applied Physics 16 2016 4 459-468 DOI: 10.1016/j.cap.2016.01.012 published formated output
Y. Wang J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2016   1732 DOI: 10.1039/c5ce02419f published formated output
S. Fang T. Herrmannc, A. Rosenkranz, C. Gachot, F.G. Marro, F. Mücklich, L. Llanes, D. Bähre „Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts“ Procedia CIRP   2016   439-443 DOI:10.1016/j.procir.2016.02.228 published formated output
M. Alishahi F. Mahboubi, S.M. Mousavi Khoie, M. Aparicio, R. Hübner, F. Soldera, R. Gago „Electrochemical behavior of nanocrystalline Ta/TaN multilayer on 316L stainless steel: Novel bipolar plates for proton exchange membrane fuel-cells“ Journal of Power Sources 322 2016   1-9 dx.doi.org/10.1016/jpowsour.2016.04133 published formated output
T. Dahmen M. Engstler, C. Pauly, P. Trampert, N. de Jonge, F. Mücklich, P. Slusallek „Feature Adaptive Sampling for Scanning Electron Microscopy“ Scientific Reports Nature Publishing Group   2016     DOI: 10.1038/srep25350 published formated output
A. I. Kovalev D. L. Wainstein, A. Y. Rashkovskiy, R. Gago, F. Soldera, J. L. Endrino „The confinement of phonon propagation in TiAIN/Ag multilayer coatings with anomalously low heat conductivity“ Applied Physics Letters 108 2016     doi.org/10.1063/1.4953230 published formated output
S. Bagherifard S. Slawik, I. Fernández-Pariente, C. Pauly, F. Mücklich, M. Guagliano „Nanoscale surface modification of AISI 316L stainless steel by severe shot peening“ Materials & Design 102 2016   68-77 doi:10.1016/j.matdes.2016.03.162 published formated output
C. M. Menezes N. Bogoni Jr., J. Barrirero, H. Aboulfadl, F. Mücklich, C. A. Figueroa „Influence of the surface chemistry - structure relationship on the nanoscale friction of nitrided and post-oxidized iron“ Surface & Coatings Technology   2016     10.1016/j.surfcoat.2016.07.095 in press formated output
Y. Motemani D. Khare, A. Savan, M. Hans, A. Paulsen, J. Franzel, C. Somsen, F. Mücklich, G. Eggeler, A. Ludwig „Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition“ Nanotechnology 27 2016   495604   published formated output
A. Rosenkranz J. C. Pangraz, C. Gachot, F. Mücklich „Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning“ Wear 368-369 2016   350-357 DOI: 10.1016/j.wear.2016.10.008 published formated output
H. Aboulfadl I. Gallino, R. Busch, F. Mücklich „Atomic scale analysis of phase formation and diffusion kinetics in AG/Al multilayer thin films“ Applied Physics 120 2016   pp. 195306 doi:10.1063/1.4968013 published formated output
K. Yalamanchili F. Wang, H. Aboulfadl, J. Barrirero, L. Rogström, E. Jiménez-Pique, F. Mücklich, F. Tasnadi, M. Odén, N. Ghafoor „Growth and thermal stability of TiN/ZrAlN: Effect of internal interfaces“ Acta Materialia 121 2016   396 - 406 doi:10.1016/j.actamat.2016.07.006 published formated output
N. Souza F Lasserre, A Blickley, M Zeiger, S Suarez, M Duarte, V Presser, F Mücklich „Upcycling spent petroleum cracking catalyst: pulsed laser deposition of single-wall carbon nanotubes and silica nanowires“ RSC Advances 6 2016   72596 - 72606 DOI: 10.1039/C6RA15479D published formated output
C. Gachot CJ Hsu, S Suarez, P Grützmacher, A Rosenkranz, A Stratmann, G Jacobs „Microstructural and Chemical Characterization of the Tribolayer Formation in Highly Loaded Cylindrical Roller Thrust Bearings“ Lubricants 4 2016 2 19 DOI:10.3390/lubricants4020019 published formated output
F. Fourouzan S Gunasekaran, A. Hedayati, E. Vuorinen, F. Mücklich „Microstructure Analysis and Mechanical Properties of Low Alloy High Strength Quenchend and Partitioned Steel“ Solid State Phenomena 258 2016   574-578 doi: 10-4028/www.scientific.net/SSP.258.574 published formated output
W. Chamorro J. Ghanbaja, Y. Battie, A. en Naciri, F. Soldera, F. Mücklich, D. Horwat „Local Structure-Driven Localized Surface Plasmon Absorption and Enhanced Photoluminescence in ZnO-Au thin Films“ Journal of Physical Chemistry   2016       accepted formated output
S. Bettscheider C. Gachot, A. Rosenkranz „How to measure the real contact area? A simple marker and relocation foot-printing approach“ Tribology International   2016     Accepted in Tribology International 26.06.2016 accepted formated output
A. Rosenkranz C. Gachot, E. Ramos-Moore, F. Mücklich „The influence of laser-patterned surfaces on the frictional behavior under dry and lubricated sliding conditions“ Tribology Online   2016     Accepted in Tribology Online 31.03.2016 accepted formated output
A. Rosenkranz S.A. Khan, C. Gachot, F. Mücklich „Wear behavior of micro-coined steel surfaces under mixed lubrication“ Industrial Lubrication and Tribology   2016     Accepted in Industrial Lubrication and Tribology accepted formated output
A. Rosenkranz M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mücklich „Laser Surface Patterning - Tailoring of Contact Area for Frictional and Antibacterial Properties“ Lubricants 4 2016   15 Accepted in Lubricants 19.01.2016; doi:10.3390/lubricants4010002 published formated output
S. Fang L. Llanes, M. Engstler, D. Bähre, F. Soldera, F. Mücklich „Surface Topography Quantification of Super Hard Abrasive Tools by Laser Scanning Microscopy“ Materials Performance and Characterization 5 2016 5 796-815   published formated output
D. Britz A. Hegetschweiler, M. Roberts, F. Mücklich „Reproducible Surface Contrasting and Orientation Correlation of Low-Carbon Steels by Time-Resolved Beraha Color Etching“ Materials Performance and Characterization 5 2016 5 553 - 563   published formated output
J. Barrirero J. Li, M. Engstler, N. Ghafoor, P. Schumacher, M. Odén, F. Mücklich „Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys“ Scripta Materialia 117 2016   16-19 DOI: 10.1016/j.scriptamat.2016.02.018 published formated output
N. Shulumba O. Hellman, Z. Raza, B. Alling, J. Barrirero, F. Mücklich, I.A. Abrikosov, M. Odén „Lattice Vibrations Change the Solid Soubility of an Alloy at High Temperatures“ Phy. Rev. Lett. 117 2016   205502   published formated output
Y. Wang S. Lany, J. Ghanbaja, Y. Fagot-Revurat, Y.P. Chen, F. Soldera, D. Horwat, F. Mücklich, J.F. Pierson „Electronic structures of Cu2O, Cu4O3, and CuO: A joint experimental and theoretical study“ Physical Review B 94 2016 255   DOI: 10.1103/PhysRevB.94.245418 published formated output
A. I. Kovalev D.L. Wainstein, A. Yu. Rashkovskiy, R. Gago, F. Soldera, J. I. Endrino, G. S. Fox-Rabinovich „Interface-Induced Plasmon Nonhomogeneity in Nanostructured Metal-Dielctric Planar Metamaterial“ Journal of Nanomaterials   2015     DOI:10.1155/2015/876247, art. no. 876247, Open Access Publication published formated output
A. Rosenkranz S. Jaeger, C. Gachot, S. Vogel, F. Mücklich „Wear behavior of laser-patterned piston rings in squeeze film dampers“ Advanced Engineering Materials 17 2015 8 1208-1214 DOI: 10.1002/adem.201400481 published formated output
A. Rosenkranz L. Reinert, C. Gachot, H. Aboulfadl, S. Grandthyll, K. Jacobs, F. Müller, F. Mücklich „Oxide formation, morphology and nanohardness of laser-patterned steel surfaces“ Advanced Engineering Materials 17 2015 8 1234-1242 DOI: 10.1002/adem.201400487 published formated output
J. H. Li J. Barrirero, M. Engstler, H. Aboulfadl, F. Mücklich, P. Schumacher „Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition“ Metallurgical and Materials Transactions A 46 2015 3 1300-1311 DOI: 10.1007/s11661-014-2702-6 published formated output
Y. Wang J. Ghanbaja, F. Soldera, S. Migot, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Tuning the structure and preferred orientation in reactively sputtered copper oxide thin films“ Applied Surface Science 335 2015   85-91 DOI:10.1016/j.apsusc.2015.02.028 published formated output
K. Yalamanchili I.C. Schramm, E. Jiménez-Piqué, L. Rogström, F. Mücklich, M. Odén, N. Ghafoor „Tuning hardness and fracture resistance of ZrN/Zr0.63Al0.37N nanoscale multilayers by stress-induced transformation toughening“ Acta Materialia 89 2015   22-31 DOI:10.1016/j.actamat.2015.01.066 published formated output
A. Rosenkranz S. Fleischmann, C. Gachot, F. Mücklich „Anisotropic spreading behavior of PAO oil on laser-patterned stainless steel surfaces“ Advanced Engineering Materials 17 2015 11 1645-1651 DOI: 10.1002/adem.201500115 published formated output
A. Rosenkranz T. Heib, C. Gachot, F. Mücklich „Oil film life time and wear particle analysis of laser-patterned stainless steel surfaces“ Wear 334-335 2015   1-12 DOI: 10.1016/j.wear.2015.04.006 published formated output
E.A. Alvarez C.G. Oliver, F. Soldera, J.L. García „Densification and FIB, SEM, TEM Microstructures of WC Composites with Fe or Co Matrices“ Procedia Materials Science 8 2015   406-413   published formated output
K.E. Trinh A. Tsipenyuk, M. Varenberg, A. Rosenkranz, N. Souza, F. Mücklich „Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting“ Wear 344-345 2015   86-98 doi:10.1016/j.wear.2015.10.010 published formated output
K. Woll I. E. Gunduz, C. Pauly, C. C. Doumanidis, S. F. Son, C. Rebholz, F. Mücklich „Numerical modeling of self-propagating reactions in Ru/Al nanoscale multilayer foils“ Applied Physics Letters 107 2015     doi: 10.1063/1.4928665 published formated output
G. Grass M. Hans, F. Mücklich, M. Solloz, C. Rensing „Massive Kupferwerkstoffe in der Hygiene und Infektionsprävention“ Hygiene&Medizin 40 2015 11 458-463   published formated output
J.-F. Pierson Y. Wang, J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2015   1732-1739   published formated output
K. Woll A. Bergamaschi, K. Nordlung, K. Avchachov, D. Flyura, C. Wagner, F. Mücklich, C. Pauly „Ru/Al Multilayers Integrate Maximum Energy Density and Ductility for Reactive Materials“ Scientific Reports   2015       accepted formated output
Mücklich, F. Engstler, M., Britz, D., Barrirero, J., Rossi, P. „Why We Need All Dimensions to Solve Both Very Old and Very New Questions in Materials at the Micro-, Nano- and Atomic Scales“ Practical Metallography 52 2015 9 507-524 doi: 10.3139/147.110360 published formated output
E. Dalibón D. Heim, C. Forsich, A. Rosenkranz, M.A. Guitar „Characterization of thick and soft DLC coatings deposited on plasma nitrided austenitic stainless steel“ Diamond and Related Materials 59 2015   73-79 doi: 10.1016/j.diamond.2015.09.010 published formated output
Rossi, P. Engstler, M., Mücklich, F. „Quantitative Classification and Assessment of Sr Modification in Hypoeutectic Al-Si and Al-Si-Mg Alloys“ Practical Metallography 52 2015 10 571-589 doi: 10.3139/147.110361 published formated output
Holzapfel, C. Pauly, C. Engstler, M., Mücklich, F. „Electron beam characterization techniques for the study of wear in sliding contacts“ Electrical Contacts (Holm), 2015 IEEE 61st Holm Conference on Electrical Contacts   2015   227-234 doi: 10.1109/HOLM.2015.7355102 published formated output
K. Trinh E. Ramos-Moore, I. Green, C. Pauly, M. Zamanzade, F. Mücklich „Topographical and Microstructural Effects of Laser Surface Texturing on Tin-coated Copper Electrical Connectors under Load Cycling“ IEEE Transactions on Components, Packaging and Manufacturing Technology   2015       accepted formated output
Dalibón, E.L. Guitar, M.A., Trava-Airoldi, V., Mücklich, F., Brühl, S.P. „Plasma nitriding and DLC coatings for corrosion protection of precipitation hardening stainless steel“ Advanced Engineering Materials 18 2015 5 826-832 DOI: 10.1002/adem.201500411 published formated output
L. Reinert M. Zeiger, S. Suárez, V. Presser, F. Mücklich „Dispersion analysis of carbon nanotubes, carbon onions and nanodiamonds for their application as reinforcement phase in nickel metal matrix composites “ RSC Advances   2015   95149-95159 DOI: 10.1039/c5ra14310a published formated output
N. Souza M. Zeiger, V. Presser, F. Mücklich „In situ tracking of defect healing and purification of single-wall carbon nanotubes with laser radiation by time-resolved Raman spectroscopy“ RSC Advances 5 2015 76 62149 - 62159 doi:10.1039/C5RA09316C published formated output
S. Suarez A. Rosenkranz, C. Gachot, F. Mücklich „Enhanced tribological properties of MWCNT/Ni bulk composites – Influence of processing on friction and wear behaviour“ Carbon 66 2014   164-171 DOI: 10.1016/j.carbon.2013.08.054 | PDF verfügbar published formated output
M.A. Guitar H. Aboulfadl, C. Pauly, P. Leibenguth, S. Migot, F. Mücklich „Production of single-phase intermetallic films from Ru-Al multilayers“ Surface and Coatings Technology 244 2014   210-216 DOI: 10.1016/j.surfcoat.2014.02.022 published formated output
P. Ferrari E. Ramos-Moore, M.A. Guitar, A.L. Cabrera „Raman analysis of ferroelectric switching in niobium-doped lead zirconate titanate thin films“ Thin Solid Films 556 2014   539-543 DOI: 10.1016/j.tsf.2014.02.050 published formated output
M.F. Broglia S. Suarez, F. Soldera, F. Mücklich, C.A. Barbero, R. Bellingeri, F. Alustiza, D. Acevedo „Direct laser interference patterning of polystyrene films doped with azo dyes, using 355 nm laser light“ Applied Surface Science 300 2014   86–90 DOI: 10.1016/j.apsusc.2014.02.008 published formated output
J. Riedrich-Möller C. Arend, C. Pauly, F. Mücklich, M. Fischer, S. Gsell, M. Schreck, C. Becher „Deterministic coupling of a single silicon-vacancy color center to a photonic crystal cavity in diamond“ Nano Letters 14 2014 9 5281–5287 DOI: 10.1021/nl502327b published formated output
Y. Wang J. Ghanbaja, F. Soldera, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Controlling the preferred orientation in sputter-deposited Cu2O thin films: influence of the initial growth stage and homoepitaxial growth mechanism“ Acta Materialia 76 2014   207-212 DOI: 10.1016/j.actamat.2014.05.008 published formated output
A. Szurdak A. Rosenkranz, C. Gachot, G. Hirt, F. Mücklich „Manufacturing and tribological investigation of hot micro-coined lubrication pockets“ Key Engineering Materials 611-612 2014   417-424 DOI: 10.4028/www.scientific.net/KEM.611-612.417 published formated output
S.-M. Liang M. Engstler, V. Groten, J. Barrirero, F. Mücklich, A. Bührig-Polaczek, R. Schmid-Fetzer „Key experiments and thermodynamic revision of the binary Al–Sr system“ Journal of Alloys and Compounds 610 2014   443-450 DOI: 10.1016/j.jallcom.2014.05.018 published formated output
J. Barrirero M. Engstler, N. Ghafoor, N. de Jonge, M. Odén, F. Mücklich „Comparison of segregations formed in unmodified and Sr-modified Al-Si alloys studied by atom probe tomography and transmission electron microscopy“ Journal of Alloys and Compounds 611 2014   410-421 DOI: 10.1016/j.jallcom.2014.05.121 published formated output
A. Montenegro-Hernández A. Soldati, L. Mogni, H. Troiani, A. Schreiber, F. Soldera, A. Caneiro „Reactivity at the Ln2NiO4+d/electrolyte interface (Ln = La, Nd) studied by Electrochemical Impedance Spectroscopy and Transmission Electron Microscopy“ Journal of Power Sources 265 2014   6-13 DOI: 10.1016/j.jpowsour.2014.04.082 published formated output
M. Hans J. C. Támara, S. Mathews, B. Bax, A. Hegetschweiler, R. Kautenburger, M. Solioz, F. Mücklich „Laser cladding of stainless steel with a copper–silver alloy to generate surfaces of high antimicrobial activity“ Applied Surface Science 320 2014   195-199 DOI: 10.1016/j.apsusc.2014.09.069 published formated output
E. Ramos-Moore C. Espinoza, R. S. Coelho, H. Pinto, P. Brito, F. Soldera, F. Mücklich, J. L. Garcia „Investigations on Thermal Stresses of a Graded Ti(C,N) Coating Deposited on WC-Co Hardmetal“ Advanced Materials Research 996 2014   848-854 DOI: 10.4028/www.scientific.net/AMR.996.848 published formated output
J. Kodolányia P. Hoppe, E. Gröner, C. Pauly, F. Mücklich „The Mg isotope composition of presolar silicate grains from red giant stars“ Geochimica et Cosmochimica Acta 140 2014   577-605 DOI: 10.1016/j.gca.2014.05.053 published formated output
T. Gries R. Catrin, S. Migot, F. Soldera, J.-L. Endrino, A. R. Landa-Canovas, F. Cleymand, D. Mangin, F. Mücklich, D. Horwat „Local Modification of the Microstructure and Electrical Properties of Multifunctional Au–YSZ Nanocomposite Thin Films by Laser Interference Patterning“ Applied Material Interfaces 6 2014 16 13707–13715 DOI: 10.1021/am503160w published formated output
R. Albrecht A. Bommer, C. Pauly, F. Mücklich, A. W. Schell, P. Engel, T. Schröder, O. Benson, J. Reichel, C. Becher „Narrow-band single photon emission at room temperature based on a single nitrogen-vacancy center coupled to an all-fiber-cavity“ Applied Physics Letters 105 2014 7   DOI: 10.1063/1.4893612 published formated output
A. Rosenkranz B. Martin, S. Bettscheider, C. Gachot, H. Kliem, F. Mücklich „Correlation between solid–solid contact ratios and lubrication regimes measured by a refined electrical resistivity circuit“ Wear 320 2014 1 51-61 DOI: 10.1016/j.wear.2014.08.018 published formated output
C. Carrasco G. Inzunza, C. Camurri, C. Rodríguez, L. Radovic, F. Soldera, S. Suarez „Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans“ Materials Science & Engineering 617 2014   146–155 DOI: 10.1016/j.msea.2014.08.057 published formated output
R. Forsén I. C. Schramm, P. O. Å. Persson, F. Mücklich, M. Odén, N. Ghafoor „Nanostructuring and coherency strain in multicomponent hard coatings“ APL Materials 2 2014     DOI: 10.1063/1.4901125 published formated output
A. Rosenkranz L. Reinert, C. Gachot, F. Mücklich „Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions“ Wear 318 2014 1 49-61 DOI: 10.1016/j.wear.2014.06.016 published formated output
F. Mücklich J. Webel, H. Aboulfadl, N. Lindow, H.-C. Hege „Correlative Tomography - Extraction of Reliable Information with Adequate Resolution from mm Scale Down to Sub-nm Scale“ Microscopy and Microanalysis 20 2014   838-839 DOI: http://dx.doi.org/10.1017/S1431927614005911 published formated output
Rossi, P. Engstler, M., Mücklich, F. „Homogeneity Quantification Method and its Application to Microstructure Assessment“ Practical Metalography 51 2014   180-199   published formated output
D. Britz A. Hegetschweiler, F. Mücklich „Opening the door to fundamental understanding of structure and color metallography - A correlative Microscopy Study on Steel“ Microscopy and Microanalysis 20 2014   834-835   published formated output
W. Chamorro D. Horwat, P. Pigeat, P. Miska, S. Migot, F. Soldera, P. Boulet, F. Mücklich „Near-room temperature single-domain epitaxy of reactively sputtered ZnO films“ Journal of Physics D: Applied Physics 46 2013 255 1-7 DOI: 10.1088/0022-3727/46/23/235107 | PDF verfügbar published formated output
D. Acevedo H. Salavagione, A. Lasagni, E. Morallón, F. Mücklich, C. Barbero „SERS Active Surface in Two Steps, Patterning and Metallization“ Advanced Engineering Materials 15 2013 5 325-329 DOI: 10.1002/adem.201200240 | PDF verfügbar published formated output
B. Raillard J. Rémond, E. Ramos-Moore, N. Souza, C. Gachot, F. Mücklich „Wetting Properties of Steel Surfaces Modified by Laser Interference Metallurgy“ Advanced Engineering Materials 15 2013 5 341-346 DOI: 10.1002/adem.201200247 | PDF verfügbar published formated output
D. S. Rodríguez P. A. Arboleda, D. O. Russo, F. Soldera, C. J. R. González-Oliver, J. M. Rincón „Thermal behaviour of iron aluminium phosphate glasses containing UO2·67“ Glass Technology - European Journal of Glass Science and Technology Part A 54 2013 3 111-118   published formated output
D. Ladutkin C. Bruch, C. Günther, H. Aboulfadl, F. Mücklich „Characterization of an Albite Inclusion Containing MgO by Atom Probe Tomography“ Practical Metallography 50 2013   607-615 DOI: 10.3139/147.110262 published formated output
C. Gachot A. Rosenkranz, B. Wietbrock, G. Hirt, F. Mücklich „Advanced design of hierarchical topographies in metallic surfaces by combining micro-coining and laser interference patterning“ Advanced Engineering Materials 15 2013   503-509 DOI: 10.1002/adem.201200295 published formated output
N. Prodanov C. Gachot, A. Rosenkranz, F. Mücklich, M.H. Müser „Contact mechanics of laser-textured surfaces: Correlating contact area and friction“ Tribology Letters 50 2013   41-48 DOI: 10.1007/s11249-012-0064-z published formated output
A. Knutsson I.C. Schramm, k. Asp Grönhagen, F. Mücklich, M. Odén „Surface directed spinodal decomposition at TiAlN/TiN interfaces“ Journal of Applied Physics 113 2013     DOI: 10.1063/1.4795155, Article Number 114305 published formated output
D. Horwat M. Dehmas, A. Gutiérrez, J.-F. Pierson, A. Anders, F. Soldera, J.-L. Endrino „Efficient, Low Cost Synthesis of Sodium Platinum Bronze NaxPt3O4“ Chemistry of Materials 24 2012 13 2429-2432 DOI: dx.doi.org/10.1021/cm301179x | PDF verfügbar published formated output
R. Catrin D. Horwat, T. Gries, B. Raillard, S. Migot, F. Mücklich „Influence of Laser Interference Patterning on Microstructure and Friction Behaviour of Gold/Yttria-Stabilized Zirconia Nanocomposite Thin Films“ Journal of Materials Research 27 2012 6 879-885 DOI:10.1557/opl.2011.861. | PDF verfügbar published formated output
E. Jiménez-Piqué A. Ramos, J. A. Muñoz-Tabares, A. Hatton, F. Soldera, F. Mücklich, M. Anglada „Focused ion beam tomography of zirconia degraded under hydrothermal conditions“ Journal of the European Ceramic Society 32 2012 10 2129-2136 DOI:10.1016/j.jeurceramsoc.2012.02.011 | PDF verfügbar published formated output
B. Raillard C. Gachot, M. Hans, P. Leibenguth, F. Mücklich „Microstructural characterization of laser-irradiated bulk copper under dry sliding conditions“ Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226 2012 6 541-551 DOI: 10.1177/1350650112440924 | PDF verfügbar published formated output
B. Bax C. Pauly, P. Leibenguth, K. Woll, F. Mücklich „Synthesis of B2-RuAl coatings on mild steel by laser cladding“ Surface and Coatings Technology 206 2012 19 3931-3937 DOI: 10.1016/j.surfcoat.2012.03.063. | PDF verfügbar published formated output
J. Balach F. Miguel, F. Soldera, D. Acevedo, F. Mücklich, C. Barbero „A direct and quantitative image of the internal nanostructure of nonordered porous monolithic carbon using FIB nanotomography“ Journal of Microscopy 246 2012 3 274-278 DOI: 10.1111/j.1365-2818.2012.03615.x | PDF Verfügbar published formated output
S. Suarez F. Soldera, C. G. Oliver, D. Acevedo, F. Mücklich „Thermomechanical behavior of Bulk Ni/MWNT Composites Produced via Powder Metallurgy“ Advanced Engineering Materials 7 2012 14 499-502 DOI: 10.1002/adem.201200100 | PDF verfügbar published formated output
J. Riedrich-Möller L. Kipfstuhl, C. Hepp, E. Neu, C. Pauly, F. Mücklich, A. Baur, M. Wandt, S. Wolff, M. Fischer, S. Gsell, M. Schreck, C. Becher „One- and two-dimensional photonic crystal microcavities in single crystal diamond“ Nature Nanotechnology 7 2012   69-74 DOI:10.1038/nnano.2011.190 | PDF verfügbar published formated output
M. Hans F. Müller, S. Grandthyll, S. Hüfner, F. Mücklich „Anisotropic wetting of copper alloys induced by one-step laser micro-patterning“ Applied Surface Sience 263 2012   416-422 DOI: 10.1016/j.apsusc.2012.09.071 | PDF verfügbar published formated output
B. Raillard L. Gouton, E. Ramos-Moore, S. Grandthyll, F. Müller, F. Mücklich „Ablation effects of femtosecond laser functionalization on steel surfaces“ Surface and Coatings Technology 207 2012   102-109 DOI: 10.1016/j.surfcoat.2012.06.023 | PDF verfügbar published formated output
D. Wibbing J. Binder, W. Schinköthe, C. Pauly, C. Gachot, F. Mücklich „Sensmili: Absolutes Wegmesssystem aus einer diffraktiven q-nären Pseudo-Zufalls-Sequenz“ Technisches Messen 79 2012   44-51 PDF verfügbar published formated output
G. Mitov J. Gessner, U. Lohbauer, K. Woll, F. Mücklich, P. Pospiech „Subcritical Crack Growth Behavior and Life Data Analysis of Two Types of Dental Y-TZP Ceramics“ Dental Materials 27 2011 7 684–691 DOI:10.1016/j.dental.2011.03.010 | PDF verfügbar published formated output
R. Catrin D. Horwat, J.-F. Pierson, S. Migot, Y. Hu, F. Mücklich „Nano-Scale and Surface Precipitation of Metallic Particles in Laser Interference Patterned Noble Metal Oxide Thin Films“ Applied Surface Science 257 2011 12 5223-5229 DOI:10.1016/j.apsusc.2010.11.060 | PDF verfügbar published formated output
R. Catrin T. Gries, D. Horwat, S. Migot, F. Mücklich „Microstructure of Sputter-deposited Noble Metal-Incorporated Oxide Thin Films Patterned by Means of Laser Interference“ Proceedings of the Materials Research Society 1339 2011     DOI: 10.1557/opl.2011.861 published formated output
D. Horwat D. I. Zakharov, J.-L. Endrino, F. Soldera, A. Anders, S. Migot, R. Karoum, P. Vernoux, J.-F. Pierson „Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition“ Surface and Coatings Technology 205 2011 2 171-177 DOI: 10.1016/j.surfcoat.2010.12.021. | PDF verfügbar published formated output
F. Mücklich F. Miguel, F. Soldera „Tomography and 3D Analysis of Microstructures and Nanowire Arrays“ 2011 MRS Fall Meeting & Exhibit, Symposium Z: Functional Metal-Oxide Nanostructures, Boston (USA)   2011       published formated output
D. Acevedo E. Frontera, M. Broglia, F. Mücklich, C. Miras, C. Barbero „One Step Lithography of Polypyrrole“ Advanced Engineering Materials 13 2011 5 405-410 DOI: 10.1002/adem.201000295 published formated output
A. Hatton M. Engstler, P. Leibenguth, F. Mücklich „Characterization of Graphite Crystal Structure and Growth Mechanisms Using FIB and 3D Image Analysis“ Advanced Engineering Materials 13 2011 3 136-144 DOI: 10.1002/adem.201000234 | PDF verfügbar published formated output
J. García R. Pitonak, R. Weißenbacher, A. Köpf, F. Soldera, S. Suarez, F. Miguel, H. Pinto, A. Kostka, F. Mücklich „Design and Characterization of Novel Wear Resistant Multilayer CVD Coatings with Improved Adhesion Between Al2O3 and Ti(C,N)“ Advanced Engineering Materials 12 2010 9 929-934 DOI: 10.1002/adem.201000130 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, C. L. Teng, M. P. Ryan, U. Hartmann, F. Mücklich „EBSD Analysis of Electroplated Magnetite Thin Films“ Journal of Magnetism and Magnetic Materials 322 2010 9 1235-1238 presentation at JEMS’08 , September 14-19, 2008, Dublin, Ireland | DOI: 10.1016/j.jmmm.2009.03.028 | PDF verfügbar published formated output
E. Detemple P. Leibenguth, C. Gachot, F. Mücklich „Large-Area Patterned Formation of Intermetallic Phases on Ti/Al Multilayer Systems by Laser Interference Metallurgy“ Thin Solid Films 519 2010 2 736-741 DOI:10.1016/j.tsf.2010.08.142 | PDF verfügbar published formated output
F. A. Lasagni A. Lasagni, I. Huertas-Olivares, C. Holazapfel, F. Mücklich „3D Nano-Characterisation of Materials by FIB-SEM/EDS Tomography“ IOP Conf. Series: Materials Science and Engineering 7 2010   012016 DOI:10.1088/1757-899X/7/1/012016 | PDF verfügbar published formated output
F. Müller C. Zeitz, H. Mantz, K.-H. Ehses, F. Soldera, J. Schmauch, M. Hannig, S. Hüfner, K. Jacobs „Elemental Depth Profiling of Fluoridated Hydroxyapatite: Saving Your Dentition by the Skin of Your Teeth?“ Langmuir 26 2010 24 18750-18759 DOI: 10.1021/la102325e | PDF verfügbar published formated output
F. Lasagni A. Lasagni, C. Holzapfel, M. Engstler, F. Mücklich „3D Microstructural Study of AlSi8Mg5 Alloy by FIB-Tomography“ Practical Metallography 47 2010 9 487-499 DOI: 10.3139/147.110088 published formated output
C.J.R. González Oliver F.C. Lovey, A. Caneiro, D.O. Russo, D.S. Rodríguez, F. Soldera, J. E. Fiscina, J. Ma. Rincón „Crystallization of iron phosphate glasses containing up to 19 wt.% UO2.67“ Journal of Non-Crystalline Solids 356 2010 52 2986-2993 DOI:10.1016/j.jnoncrysol.2010.06.034 | PDF verfügbar published formated output
F. Mücklich M. Engstler „Microstructure Tomography in the Micro, Nano and Atomic scale – Advanced Access to Understand Local Formation as well as Degradation of Materials Microstructure“ Microscopy and Microanalysis 16 2010 2 688-689 DOI: 10.1017/S1431927610063154 | PDF verfügbar published formated output
F. Mücklich M. Engstler „Gefügetomografie mit Ionen- und Elektronenstrahlen: Ein Werkzeug zur Klärung komplexer Gefügebildung und lokaler Gefügedegradation“ Journal of Heat Treatment of Materials 64 2009 5 262-269 PDF verfügbar published formated output
H. Shanak K.-H. Ehses, W. Götz, P. Leibenguth, R. Pelster „X-Ray Diffraction Investigations of α- Polyamide 6 Films: Orientation and Structural Changes upon Uni- and Biaxial Drawing“ Journal of Materials Science 44 2009 2 655-663 DOI: 10.1007/s10853-008-3062-7 | PDF verfügbar published formated output
D. Acevedo H. Salavagione, A. Lasagni, E. Morallon, F. Mücklich, C. Barbero „Fabrication of Highly Ordered Arrays of Platinum Nanoparticles Using Direct Laser Interference Patterning“ ACS Applied Materials & Interfaces 1 2009 3 549 DOI: 10.1021/am900075z | PDF verfügbar published formated output
C. Gachot R. Catrin, A. Lasagni, U. Schmid, F. Mücklich „Comparative Study of Grain Sizes and Orientation in Microstructured Au, Pt and W Thin Films Designed by Laser Interference Metallurgy“ Applied Surface Science 255 2009   5626-5632 DOI:10.1016/j.apsusc.2008.10.032 | PDF verfügbar published formated output
R. Catrin C. Gachot, G. Marchand, U. Schmid, F. Mücklich „Selective Wet Chemical Etching of Metallic Thin Films Designed by Laser Interference Metallurgy (LIMET)“ SPIE Proceedings 7362 2009   736217-1-6 Conference proceeding: SPIE Europe Microtechnologies for the New Millennium (Dresden, 4-6 Mai 09) | DOI:10.1117/12.821333 | PDF verfügbar published formated output
A. Velichko A. Wiegmann, F. Mücklich „Estimation of the Effective Conductivities of Complex Cast Iron Microstructures using FIB-tomographic Analysis“ Acta Materialia 57 2009   5023-5035 DOI:10.1016/j.actamat.2009.07.004 | PDF verfügbar published formated output
M. Hans C. Gachot, F. Müller, F. Mücklich „Direct Laser Interference Structuring as a Tool to Gradually Tune the Wetting Response of Titanium and Polyimide Surfaces“ Advanced Engineering Materials 11 2009 10 795-800 DOI:10.1002/adem.200900115 | PDF verfügbar published formated output
F. G. Marro R. Chintapalli, P. Hvizdos, F. Soldera, F. Mücklich, M. Anglada „Study of Near Surface Changes in Yttria-doped Tetragonal Zirconia after Low Temperature Degradation“ International Journal of Materials Research 100 2009 1 92-96 PDF verfügbar published formated output
D.F. Acevedo G. Martínez, J. T. Arana, E.I. Yslas, F. Mücklich, C. Barbero, H. J. Salavagione „Easy Way to Fabricate Nanostructures on a Reactive Polymer Surface“ Journal of Physical Chemistry B 113 2009 44 14661-14666 DOI:10.1021/jp9074515 | PDF verfügbar published formated output
M. Hans C. Gachot, R. Catrin, B. Raillard, F. Mücklich „Laserinterferenzstrukturierung zur Funktionalsisierung von Kupferwerkstoffen“ Metall 63 2009 11 579-581   published formated output
D. Acevedo A. Lasagni, M. Cornejo, M. Politano, C. Barbero, F. Mücklich „Large Area Fabrication of Tuned Polystyrene/Poly-methylmethacrylate Periodic Structures using Laser Interference Patterning“ Langmuir 25 2009 16 9624 DOI: 10.1021/la9007944 | PDF verfügbar published formated output
F. Soldera G. Burdiles, U. Schmid, H. Seidel, F. Mücklich „Investigation of the Interaction between Electrical Discharges and Low Resistivity Silicon Substrates“ Applied Surface Science 254 2008 7 2150-2157 DOI: 10.1016/j.apsusc.2007.08.087 | PDF verfügbar published formated output
D. Bruch D. Henes, P. Leibenguth, C. Holzapfel „Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Forgings with Large Wall Thicknesses“ La Metallurgica Italiana   2008 6 7-13 17-19.06.2007, Grado, Italien published formated output
R. Catrin A. Lasagni, C. Gachot, U. Schmid und F. Mücklich „Microstructural Design of Advanced Architectures in Titanium/Platinum Thin Films by Laser Interference Metallurgy“ Advanced Engineering Materials 10 2008 5 466-470 DOI:10.1002/adem.200700328 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, M. Engstler, H. P. Degischer, F. Mücklich „Nano-characterization of Cast Structures by FIB-Tomography“ Advanced Engineering Materials 10 2008 1 62-66 DOI: 10.1002/adem.200700249 | PDF verfügbar published formated output
M. Duarte A. Lasagni, R. Giovanelli, J. Narciso, E. Louis, F. Mücklich „Increasing Lubricant Lifetime by Grooving Periodical Patterns using Laser Interference Metallurgy“ Advanced Engineering Materials 10 2008 6 554-558 DOI: 10.1002/adem.200700321 | PDF verfügbar published formated output
M. R. S. Castro A. Lasagni, H. K. Schmidt, F. Mücklich „Direct Laser Interference Patterning of Multi-Walled Carbon Nanotube-based Transparent Conductive Coatings“ Applied Surface Science 254 2008 18 5874-5878 DOI: 10.1016/j.apsusc.2008.03.140 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, C. Holzapfel, F. Mücklich „Sample Preparation of Al-alloys for 3D-FIB Nano-characterization“ Practical Metallography 45 2008 5 246-250   published formated output
A. Lasagni M. Cornejo, F. Lasagni, F. Mücklich „Laser Ablation Modeling of Periodic Pattern Formation on Polymer Substrates“ Advanced Engineering Materials 10 2008 5 488-493 DOI: 10.1002/adem.200700323 | PDF verfügbar published formated output
Y. Gaillard E. Jiménez-Piqué, F. Soldera, F. Mücklich, M. Anglada „Quantification of Hydrothermal Degradation in Zirconia by Nanoindentation“ Acta Materialia 56 2008 16 4206-4216 DOI: 10.1016/j.actamat.2008.04.050 | PDF verfügbar published formated output
T. Kaiser W. Sigle, D. Goll, N. H. Goo, V. Srot, P. A. van Aken, E. Detemple, W. Jäger „Transmission Electron Microscopy Study of the Intermixing of Fe--Pt Multilayers“ Journal of Applied Physics 103 2008 6 063913-1-063913-6 DOI: 10.1063/1.2884347 published formated output
R. Hermann H. Vinzelberg, G. Behr, K. Woll, F. Mücklich, B. Büchner „Magnetic Field Controlled Floating-Zone Crystal Growth and Properties of RuAl Single Crystal“ Journal of Crystal Growth 310 2008   4286-4289 DOI: 10.1016/j.jcrysgro.2008.06.082 | PDF verfügbar published formated output
M. D´Alessandria A. Lasagni, F. Mücklich „Direct Micro-patterning of Aluminum Substrates via Laser Interference Metallurgy“ Applied Surface Science 255 2008 5 3210-3216 DOI:10.1016/j.apsusc.2008.09.018 published formated output
F. Mücklich C. Gachot, R. Catrin, U. Schmid, A. Lasagni „Macroscopic 2D Design of Micro/Nano Grain Architectures by Laser Interference Metallurgy“ Mater. Res. Soc. Symp. Proc. 1059-KK04- 2008       published formated output
D. Acevedo A. Lasagni, C. Barbero, F. Mücklich „Simple Fabrication Method of Conductive Polymeric Arrays using Direct Laser Interference Micro/Nano Patterning“ Advanced Materials 19 2007   1272-1275   published formated output
A. Koblischka-Veneva C. Gachot, P. Leibenguth, F. Mücklich „Investigation of Microstructure of Bulk Ni2MnGa Alloy by Means of Electron Backscatter Diffraction Analysis“ Journal of Magnetism and Magnetic Materials 316 2007   e431-e434 presented at III JOINT EUROPEAN MAGNETIC SYMPOSIA, June 3026, 2006, San Sebastian, Spain published formated output
R. Szamocki A. Velichko, C. Holzapfel, F. Mücklich, S. Ravaine, P. Garrigues, N. Sojic, R. Hempelmann, A. Kuhn „Macroporous Ultramicroelectrodes for Improved Electroanalytical Measurements“ Analytical Chemistry 79 2007 2 533-539   published formated output
C. Petersen A. Lasagni, C. Holzapfel, C. Daniel, F. Mücklich, M. Veith „SEM/TEM Characterization of Periodical Novel Amorphous/Nanocrystalline Micro-composites Obtained by Laser Interference Structuring: The System HAlO-Al·Al2O3“ Applied Surface Science 253 2007   8022-8027   published formated output
K. Woll C. Holzapfel, H. A. Gobran, F. Mücklich „Single-Phase Interdiffusion in B2-RuAl Intermetallic Compound“ Scripta Materialia 57 2007 1 1-4   published formated output
S. P. Harimkar C. Daniel, C. Holzapfel, P. Leibenguth, F. Mücklich, N. B. Dahotre „Validation of Crystallographic Correlation for Faceted Morphology in Laser Surface Engineered Alumina Ceramic“ Scripta Materialia 57 2007   401-404   published formated output
D. Jankovic-Ilic J. Fiscina, C.G. Oliver, N. Ilic, F. Mücklich „Self Formed Cu-W Finctionally Graded Material Produced via Powder Segregation“ Advanced Engineering Materials 9 2007 7 542-546   published formated output
R. Szamocki A. Velichko, F. Mücklich, S. Reculusa, S. Ravaine, S. Neugebauer, W. Schuhmann, R. Hempelmann, A. Kuhn „Improved enzyme immobilization for enhanced bioelectrocatalytic activity of porous electrodes“ Electrochemistry Communications 9 2007 8 2121-2127   published formated output
A. Lasagni M. D´Alessandria, R. Giovanelli, F. Mücklich „Advanced Design of Periodical Architectures in Bulk Metals using Laser Interference Metallurgy“ Applied Surface Science 254 2007   930-936 DOI: 10.1016/j.apsusc.2007.08.010 | PDF verfügbar published formated output
F. Soldera Y. Gaillard, M. Anglada Gomila, F. Mücklich „FIB-Tomography of Nanoindentation Cracks in Zirconia Polycrystals“ Microscopy and Microanalysis 13 2007 2 1510-1511 DOI: 10.1017/S1431927607075654 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, E. Marks, C. Holzapfel, F. Mu¨cklich, H.P. Degischer „Three-dimensional characterization of ‘as-cast’ and solution-treated AlSi12(Sr) alloys by high-resolution FIB tomography“ Acta Materialia 55 2007   3875-3882 DOI: 10.1016/j.actamat.2007.03.004 | PDF verfügbar published formated output
F. Mücklich A. Lasagni, C. Daniel „Laser Interference Metallurgy - Using Interference as a Tool for Micro/Nano Structuring“ Zeitschrift für Metallkunde 97 2006 10 1337-1344 PDF vergügbar | ausgezeichnet mit dem Werner-Köster-Preis 2006 der DGM und des Carl-Hanser-Verlages published formated output
F. Lasagni A. Lasagni, C. Holzapfel, F. Mücklich, H. P. Degischer „Three Dinemsional Characterization of Unmodified and Sr-Modified Al-Si Eutectics by FIB and FIB EDX Tomography“ Advanced Engineering Materials 8 2006 8 719-723 DOI: 10.1002/adem.200500276 | PDF verfügbar published formated output
J. Rager A. Nagel, M. Schwenger, A. Flaig, G. Schneider, F. Mücklich „Platinum Ceramic Composites as New Electrode Materials: Fabrication, Sintering, Microstructure and Properties“ Advanced Engineering Materials 8 2006 1 81-88 DOI: 10.1002/adem.200500192 | PDF verfügbar published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, L. Shlyk, G. Krabbes „An Electron Backscatter Diffraction Investigation of Crystallographic Orientations of Embedded Nanoparticles within Melt-textured YBCO High Temperature Superconductors“ Superconductor Science and Technology 19 2006   562-566 DOI: 10.1088/0953-2048/19/7/S27 | PDF verfügbar published formated output
K. Roberts G. Weikum, F. Mücklich „Examinations of the Automatic Classification of Lamellar Graphite Using the Support Vector Machine“ Practical Metallography 42 2005   396-410 PDF verfügbar published formated output
J. Rager A. Flaig, G. Schneider, T. Kaiser, F. Soldera, F. Mücklich „Oxidation Damage of Spark Plug Electrodes“ Advanced Engineering Materials 7 2005   633-640 DOI: 10.1002/adem.200500025 | PDF verfügbar published formated output
K. W. Liu C. Gachot, P. Leibenguth, F. Mücklich „Combinatorial Experiment in Ni-Ti Thin Films by Laser Interference Structuring“ Applied Surface Science 247 2005   550-555 DOI: 10.1016/j.apsusc.2005.01.123 | PDF verfügbar published formated output
H.A. Gobran D. Heger, F. Mücklich „Determination of RuAl Phase Boundaries in Binary RuAl Phase Diagram at Room Temperature and 1200°C“ Zeitschrift für Metallkunde 96 2005 7 792-798   published formated output
F. Mücklich A. Lasagni, C. Daniel „Laser Interference Metallurgy – Periodic Surface Patterning and Formation of Intermetallics“ Intermetallics 13 2005 3 437-442 DOI: 10.1016/j.intermet.2004.07.005 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich, K. Ogasawara, M. Murakami „Interactions of Y2BaCuO5 Particles and the YBCO Matrix within Melt-Textured YBCO Samples Studied by Means of EBSD“ Superconductor Science and Technology 18 2005   158-163 DOI: 10.1088/0953-2048/18/2/032 | PDF verfügbar published formated output
F. Soldera A. Lasagni, F. Mücklich, T. Kaiser, K. Hrastnik „Determination of the Cathode Erosion and Temperature for the Phases of High Voltage Discharges using FEM Simulations“ Computational Materials Science 32 2005   123-139 DOI: 10.1016/j.commatsci.2004.06.004 | PDF verfügbar published formated output
A. Koblischka-Veneva M R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami „Interplay of YBCO and Embedded 211 Particles in Melt-Textured YBCO“ Journal of Superconductivity 18 2005 4 469-474 DOI: 10.1007/s10948-005-0027-9 | PDF verfügbar published formated output
F. Soldera A. Lasagni, F. Mücklich „FEM-Simulation of the Electrode Temperature Distribution and Crater Formation. Part I: Breakdown of an Electrical Discharge“ Journal de Physique IV 120 2004   429-437 DOI: 10.1051/jp4:2004120049 | PDF verfügbar published formated output
C. Daniel A. Lasagni, F. Mücklich „Stress and Texture Evolution of Ni/Al Multi-Film by Laser Interference Irradiation“ Surface & Coatings Technology   2004   478-482   published formated output
A. Koblischka-Veneva M. R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami „Position-dependent Texture Analysis of Melt-textured YBCO by Means of Electron Backscatter Diffraction“ Physica C 392 2003   607-612   published formated output
M. R. Koblischka A. Koblischka-Veneva, E.S. Reddy, G. J. Schmitz, K. Ogasawara, M. Murakami „Orientations of Y2BaCuO5 and YBCO within Melt-textured and Directional Solidified Samples Studied by EBSD“ Physica C 392 2003   589-595   published formated output
H.A. Gobran K. W. Liu, D. Heger, F. Mücklich „Investigation on Point Defect Structure in Single Phase B2 Type RuAl Alloys by Lattice Parameter Measurements“ Scripta Materialia 49 2003 12 1097-1102   published formated output
J. Fiscina M. Ohligschläger, F. Mücklich „W-Cu Graded Alloys Produced by Size Segregation of Agglomerates Induced by Vertical Vibration at High Frequencies“ Journal of Materials Science Letters 22 2003   1455-1457   published formated output
F. Soldera N. Ilic, S. Brännström, I. Barrientos, H. Gobran, F. Mücklich „Formation of Al2O3 Scales on Single Phase RuAl Produced by Reactive Sintering“ Oxidation of Metals 59 2003 5 529-542 PDF verfügbar published formated output
Z. Liu X. K. Meng, T. Recktenwald, F. Mücklich „Patterned Intermetallics Reaction of Ni3Al by Laser Interference Structuring“ Materials Science & Engineering   2003   101-103   published formated output
N. Ilic R. Rein, M. Göken, M. Kempf, F. Soldera, F. Mücklich „Properties of Eutectic Ru-Al Alloy Produced by Ingot Metallurgy“ Materials Science and Engineering A   2002   38-44 PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami „Orientation Imaging Microscopy Analysis of Bulk, Melt-textured YBCO Superconductors“ Crystal Engineering 5 2002   265-272   published formated output
K. W.Liu F. Mücklich, R. Birringer „Formation of Eutectic RuAl/Ru Nanocomposite by Mechanical Alloying and Subsequent Annealing“ Journal of Materials Research 16 2001 9 2459-2462   published formated output
D. Katrakova M. Damgaard, F. Mücklich „Preparation for Electron Backscatter Diffraction with LaboPol-4 / LaboForce-1“ Structure 38 2001   19-24   published formated output
K. W. Liu F. Mücklich, R. Birringer „Formation of Eutectic RuAl/Ru Nanocomposite by Mechanical Alloying and Subsequent Annealing“ Journal of Materials Research 16 2001   2459-2462   published formated output
K. W. Liu F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig „Synthesis of Nanocrystalline B2 Structured (Ru,Ni)Al in the Ternary Ru-Al-Ni System by Mechanical Alloying and its Thermal Stability“ Materials Science and Engineering   2001   187-197   published formated output
K. W. Liu F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig „Synthesis of Nanocrystalline B2 Structured (Ru,Ir)Al in the Ternary Ru-Al-Ir System by Mechanical Alloying and its Thermal Stability“ Zeitschrift für Metallkunde 92 2001 8 924-930   published formated output
F. Mücklich J. Ohser, S. Blank, D. Katrakova, G. Petzow „Stereological Analysis of Grain Size and Grain Shape Applied to Silicon Nitride Ceramics“ Zeitschrift für Metallkunde 90 1999   557-561   published formated output
C. Mähler F. Mücklich, G. Weikum „Intelligente Suche nach Ätzrezepturen für Werkstoffe“ (referiertes) Proceeding der 8. GI-Fachtagung über Datenbanksysteme in Büro, Technik und Wissenschaft   1999   69-79 Freiburg; A.P. Buchmann (Ed.), Springer-Verlag published formated output
Y. Hao F. Mücklich, G. Petzow „Investigation of the Dislocation Structure in hcp Single Crystals by Means of the Rocking Crystal Method“ Acta Metallurgica Sinica 33 1997 2 198-206   published formated output
F. Mücklich J. Ohser, G. Schneider „Die Charakterisierung homogener polyedrischer Gefüge mit Hilfe des räumlichen Poisson-Voronoi-Mosaiks und der Vergleich zur DIN 50 601“ Zeitschrift für Metallkunde 88 1997 1 27-32   published formated output
U. Scholz D. Plachke, W. Yuan, H.-J. Carstanjen, F. Mücklich, G. Petzow „On the Influence of Impurities in Beryllium Single Crystal Growth“ Journal of Crystal Growth 169 1996   575-577   published formated output
Y. Hao F. Mücklich, G. Petzow „Correlation between the Dislocation Configuration and the Related Scattering Behaviour of hcp Single Crystals by Application of the Fourier Transformation Approach“ Computational Materials Science 7 1996   167-172   published formated output
U. Scholz Z. S. Nikolic, F. Mücklich, G. Petzow „Determination and Modification of the Thermal Conditions in a Double Ellipsoid Mirror Furnace“ Journal of Crystal Growth 169 1996   578-581   published formated output
Y. Hao F. Mücklich, G. Petzow „Correlation between Scattering Behaviour of H.C.P. Single Crystals and Incorporated Dislocation Arrangement Quantified by the Fourier Transformation“ Physica Status Solidi A 158 1996 9 9-17   published formated output
F. Mücklich G. Petzow „Development of Beryllium Single Crystal Material for Monochromator Applications“ Mineral Proc. and Extract. Met. Rev. 13 1994   193-227   published formated output
F. Mücklich S. Hartmann, M. J. Hoffmann, G. A. Schneider, J. Ohser, G. Petzow „Quantitative Description of Silicon Nitride Microstructures“ Key Engineering Materials   1994   465-469   published formated output
F. Mücklich H. Oettel, G. Petzow „Realstruktur von Einkristallen und die Intensitäten von Braggreflexen“ Zeitschrift für Metallkunde 6 1993   419-425   published formated output
J. Li J. Barrirero, G. Sha, H. Aboulfadl, F. Mücklich, P. Schumacher „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia           submitted formated output
A.F. Lasagni C. Gachot, K.E.Trinh, M. Hans, A. Rosenkranz, T. Roch, S. Eckhardt. T. Kunze, M. Bieda, D. Günther, V. Lang, F. Mücklich „Direct laser interference patterning, 20 years of development: From the basics to industrial applications“ Proc. SPIE 10092, Laser-based Micro- and Nanoprocessing XI 1009211     doi: 10.1117/12.2252   published formated output
A. I. Kovalev D. L. Wainstein, V. O. Vakhrushev, R. Gago, F. Soldera, J. L. Endrino, G. S. Fox-Rabinovich, S. Veldhuis „Features of electronic and lattice mechanisms of transboundary heat transfer in multilayer nanolaminate TiAlN/Ag coatings“ Scientific Reports 7     17078 DOI:10.1038/s41598-017-17291-4 published formated output



view full database







Publica (build 111206), (c) Lehrstuhl für Funktionswerkstoffe, Universität des Saarlandes, 2006. Konzept und Betreuung: Daniel Henry. Datenschutz, Impressum