Stand: 3.7.2018, 11:23



Benutzername: Passwort:


aktuelle Anzeige: Publications (peer-review), Eingrenzung: Co-Autor, Sortierung nach: Jahr - view full database
Vol
Jahr
No.
Seiten
 
E. Roitero M. Ochoa, M. Anglada, F. Mücklich, E. Jiménez-Piqué „Low temperature degradation of laser patterned 3Y-TZP: Enhancement of resistance after thermal treatment“ Journal of the European Ceramic Society 38 2018   1742-1749 10.1016/j.jeurceramsoc.2017.10.044 published formated output
E. Ramos-Moore P. Leibenguth, S. Slawik, R.S.Coelho, D. Horwat, S. Migot, B. Lechthaler, F. Mücklich „Estimation of residual stresses in perovskite fims for capacitor applications“ Thin Solid Films 648 2018   21-25   published formated output
E. Roitero F. Lassere, M. Anglada, F. Mücklich, E. Jiménez-Piqué „A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality“ Dental Materials 33 2017   pp. e28-e38   published formated output
L. Reinert F. Lasserre, C. Gachot, P. Grützmacher, T. MacLucas, N. Souza, F. Mücklich, S. Suarez „Long-lasting solid lubrication by CNT-coated patterned surfaces“ Scientific Reports 7 2017   42873 Doi: 10.1038/srep42873 published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, P. Eklund, J. Schmauch, F. Mücklich, M. Odén „Solid state formation of Ti4AlN3 in cathodic arc deposited (Ti1−xAlx)Ny alloys“ Acta Materialia 129 2017   268-277   published formated output
A. Kruglova M. Roland, S. Diebels, T. Dahmen, P. Slusallk, F. Mücklich „Modelling and characterization of ductile fracture surface in Al-Si alloys by means of Voronoi tessellation“ Materials Characterization 131 2017   1 - 11 DOI: 10.1016/j.matchar.2017.06.013 published formated output
A. Torge P. Grützmacher, F. Mücklich, M. Schneider „The influence of mannitol on morphology and disintegration of spray-dried nano-embedded microparticles“ European Journal of Pharmaceutical Sciences 104 2017   171 - 179 DOI: 10.1016/j.ejps.2017.04.003 published formated output
A.E. Giba P. Pigeat, S. Bruyere, H. Rinnert, F. Soldera, F. Mücklich, R. Gago, D. Horwat „Strong Room Temperature Blue Emission from Rapid Thermal Annealed Cerium-Doped Aluminium“ ACS Photonics 4 2017   1945-1953 DOI: 10.1021/acsphotonics.7b00233 published formated output
R. Schieber F. Lasserre, M. Hans, M. Fernández-Yagüe, M. Diaz-Ricart, G. Escolar, M. Ginebra, F. Mücklich, M. Pegueroles „Direct Laser Interference Patterning of CoCr Alloy Surfaces to Control Endothelial Cell and Platelet Response for Cardiovascular Applications“ Advanced Health Care Materials   2017     DOI: 10.1002/adhm.201700327 published formated output
Y. Wang J. Ghanbaja, S. Bruyère, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Room temperature self-assembled growth of vertically aligned columnar copper oxide nanocomposite thin films on unmatched substrates“ Scientific Reports 7   2017   1-9 DOI:10.1038/s41598-017-10540-6 published formated output
A. Ababneh A. N. Al-Omari, A. M. K. Dagamseh, M. Tantawi, C. Pauly, F. Mücklich, D. Feili, H. Seidel „Electrical and morphological characterization of platinum thin-films with various adhesion layers for high temperature applications“ Microsystem Technologies 23 2017 3 703-709   published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, S. Slawik, S. Suarez, F. Mücklich, M. Odén „Effects of nitrogen vacancies on phase stability and mechanical properties of arc deposited (Ti0.52Al0.48)Ny (y < 1) coatings“ Surface & Coatings Technology 330 2017   77-86 DOI: 10.1016/j.surfcoat.2017.09.043 published formated output
A. Katzensteiner K. Aristizabal, S. Suarez, R. Pippan, A. Bachmaier „Temperature dependent structural evolution in nickel/carbon nanotube composites processed by high-pressure torsion“ IOP Conf. Ser. Mater. Sci. Eng. 194 2017   12019 Doi: 10.1088/1757-899X/194/1/012019 published formated output
P.K. Yalamanchili F. Wang, I. Schramm, J.M. Andersson, M.P.J. Joesaar, F. Tasnádi, F. Mücklich, N. Ghafoor, M. Odén „Exploring the high entropy alloy concept in (AlTiVNbCr)N“ Thin Solid Films 636 2017   346-352   published formated output
J. Lee P. Srimuk, K. Aristizabal, C. Kim, S. Choudhury, Y.C.Nah, F. Mücklich, V. Presser „Pseudocapacitive Desalination of Brackish Water and Seawater with Vanadium-Pen toxide-Decorated Multiwalled Carbon Nanotubes“ Chem. Sus. Chem. 10 2017 18     published formated output
K.M. Calamba I.C. Schramm, M.P. Johansson Joesaar, J. Ghanbaja, J.F. Pierson, F. Mücklich, M. Odén „Enhanced thermal stability and mechanical properties of nitrogen deficient titanium aluminum nitride (Ti0.54AI0.46Ny) thin films by tuning the applied negative bias voltage“ Journal of Applied Physics 122 2017 255     published formated output
A. Rosenkranz A. Szurdak, P. Grützmacher, G. Hirt, F. Mücklich „Friction reduction induced by elliptical surface patterns under lubricated conditions“ Advanced Engineering Materials   2017 255 1-7 DOI: 10.1002/adem.20170031 published formated output
S. Bettscheider P.G. Grützmacher, A. Rosenkranz „Low friction and high solid-solid contactratio - a contradiction for laser-patterened surfaces?“ Lubricants 5 2017 35   doi:10.3390/lubricants5030035 published formated output
A. Bachmaier H. Krenn, P. Knoll, H. Aboulfadl, R. Pippan „Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing“ Journal of Alloy and Compounds 725 2017   744-749 doi:10.1016/j.jallcom.2017.07.200 published formated output
A. Rosenkranz P. Grützmacher, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich „Synergetic effect of laster patterning and micro coining for controlled lubricant propagation“ Surface Topography: Metrology and Properties, Special Issue   2016       submitted formated output
Li, J.H. Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F., Schumacher, P. „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia 108 2016   207 - 218 doi:10.1016/j.actamat.2016.01.053 published formated output
Y. Wang J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2016   1732 DOI: 10.1039/c5ce02419f published formated output
M. Alishahi F. Mahboubi, S.M. Mousavi Khoie, M. Aparicio, R. Hübner, F. Soldera, R. Gago „Electrochemical behavior of nanocrystalline Ta/TaN multilayer on 316L stainless steel: Novel bipolar plates for proton exchange membrane fuel-cells“ Journal of Power Sources 322 2016   1-9 dx.doi.org/10.1016/jpowsour.2016.04133 published formated output
T. Dahmen M. Engstler, C. Pauly, P. Trampert, N. de Jonge, F. Mücklich, P. Slusallek „Feature Adaptive Sampling for Scanning Electron Microscopy“ Scientific Reports Nature Publishing Group   2016     DOI: 10.1038/srep25350 published formated output
S. Bagherifard S. Slawik, I. Fernández-Pariente, C. Pauly, F. Mücklich, M. Guagliano „Nanoscale surface modification of AISI 316L stainless steel by severe shot peening“ Materials & Design 102 2016   68-77 doi:10.1016/j.matdes.2016.03.162 published formated output
S.A. Brinkmann M. Frensemeier, C.M. Laursen, H.J. Maier, D.Britz, A.S. Schneider, F. Mücklich, C.P. Frick „Effect of Indentation Temperature on Nickel-Titanium Indentation-Induced Two-Way Shape-Memory Surfaces“ Materials Science & Engineering A   2016     doi: http://dx.doi.org/10.1016/j.msea.2016.08.036 accepted formated output
I. C. Schramm M. P. Johansson Jõesaar, J. Jensen, F. Mücklich, M. Odén „Impact of nitrogen vacancies on the high temperature behavior of (Ti1-xAlx)Ny alloys“ Acta Materialia 119 2016   218-228   published formated output
Y. Motemani D. Khare, A. Savan, M. Hans, A. Paulsen, J. Franzel, C. Somsen, F. Mücklich, G. Eggeler, A. Ludwig „Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition“ Nanotechnology 27 2016   495604   published formated output
A. Rosenkranz J. C. Pangraz, C. Gachot, F. Mücklich „Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning“ Wear 368-369 2016   350-357 DOI: 10.1016/j.wear.2016.10.008 published formated output
A. Rosenkranz F. Krupp, L. Reinert, F. Mücklich, B. Sauer „Tribological performance of laser-patterned chain links - Influence of pattern geometry and periodicity“ Wear 370-371 2016   51-58   published formated output
K. Yalamanchili F. Wang, H. Aboulfadl, J. Barrirero, L. Rogström, E. Jiménez-Pique, F. Mücklich, F. Tasnadi, M. Odén, N. Ghafoor „Growth and thermal stability of TiN/ZrAlN: Effect of internal interfaces“ Acta Materialia 121 2016   396 - 406 doi:10.1016/j.actamat.2016.07.006 published formated output
N. Souza F Lasserre, A Blickley, M Zeiger, S Suarez, M Duarte, V Presser, F Mücklich „Upcycling spent petroleum cracking catalyst: pulsed laser deposition of single-wall carbon nanotubes and silica nanowires“ RSC Advances 6 2016   72596 - 72606 DOI: 10.1039/C6RA15479D published formated output
C. Gachot CJ Hsu, S Suarez, P Grützmacher, A Rosenkranz, A Stratmann, G Jacobs „Microstructural and Chemical Characterization of the Tribolayer Formation in Highly Loaded Cylindrical Roller Thrust Bearings“ Lubricants 4 2016 2 19 DOI:10.3390/lubricants4020019 published formated output
J. Barrirero J. Li, M. Engstler, N. Ghafoor, P. Schumacher, M. Odén, F. Mücklich „Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys“ Scripta Materialia 117 2016   16-19 DOI: 10.1016/j.scriptamat.2016.02.018 published formated output
Y. Wang S. Lany, J. Ghanbaja, Y. Fagot-Revurat, Y.P. Chen, F. Soldera, D. Horwat, F. Mücklich, J.F. Pierson „Electronic structures of Cu2O, Cu4O3, and CuO: A joint experimental and theoretical study“ Physical Review B 94 2016 255   DOI: 10.1103/PhysRevB.94.245418 published formated output
B. Bax S. Slawik, C. Pauly, F. Mücklich „Experimental investigation of phase equilibria in the Ru-Fe-Al system at 1473 K“ Intermetallics 64 2015   96-101 DOI:10.1016/j.intermet.2015.05.002 published formated output
S. Suárez F. Lasserre, F. Soldera, R. Pippan, F. Mücklich „Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation“ Materials Science and Engineering: A 626 2015   122-127 DOI: 10.1016/j.msea.2014.12.065 published formated output
A. Bachmaier H. Aboulfadl, M. Pfaff, F. Mücklich, C. Motz „Structural evolution and strain induced mixing in Cu–Co composites studied by transmission electron microscopy and atom probe tomography“ Materials Characterization 100 2015   178-191 DOI: 10.1016/j.matchar.2014.12.022 published formated output
J. H. Li J. Barrirero, M. Engstler, H. Aboulfadl, F. Mücklich, P. Schumacher „Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition“ Metallurgical and Materials Transactions A 46 2015 3 1300-1311 DOI: 10.1007/s11661-014-2702-6 published formated output
Y. Wang J. Ghanbaja, F. Soldera, S. Migot, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Tuning the structure and preferred orientation in reactively sputtered copper oxide thin films“ Applied Surface Science 335 2015   85-91 DOI:10.1016/j.apsusc.2015.02.028 published formated output
K. Yalamanchili I.C. Schramm, E. Jiménez-Piqué, L. Rogström, F. Mücklich, M. Odén, N. Ghafoor „Tuning hardness and fracture resistance of ZrN/Zr0.63Al0.37N nanoscale multilayers by stress-induced transformation toughening“ Acta Materialia 89 2015   22-31 DOI:10.1016/j.actamat.2015.01.066 published formated output
A. Bachmaier M. Pfaff, M. Stolpe, H. Aboulfadl, C. Motz „Phase separation of a supersaturated nanocrystalline Cu-Co alloy and its influence on thermal stability“ Acta Materialia 96 2015   269-283 doi:10.1016/j.actamat.2015.05.053 published formated output
José Garcia Thais Carvalho Miranda, Haroldo C. Pinto, Flavio Soldera, Frank Mücklich „3D-FIB characterization of wear in WC-Co coated composites“ Materials Science Forum 825-826 2015   995-1000 doi:10.4028/www.scientific.net/MSF.825-826.995 published formated output
S. Weyand D. Britz, D. Rupp, F. Mücklich „Investigation of Austenite Evolution in Low Carbon Steel by Combining Thermo-Mechanical Simulation and EBSD-Data“ ASTM International Journal on Materials Performance and Characterization, Special Issue: Acceleration of Alloy Design via Physical Process Simulation 4 2015 3 322-340   published formated output
K.E. Trinh A. Tsipenyuk, M. Varenberg, A. Rosenkranz, N. Souza, F. Mücklich „Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting“ Wear 344-345 2015   86-98 doi:10.1016/j.wear.2015.10.010 published formated output
K. Woll I. E. Gunduz, C. Pauly, C. C. Doumanidis, S. F. Son, C. Rebholz, F. Mücklich „Numerical modeling of self-propagating reactions in Ru/Al nanoscale multilayer foils“ Applied Physics Letters 107 2015     doi: 10.1063/1.4928665 published formated output
J.-F. Pierson Y. Wang, J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2015   1732-1739   published formated output
K. Woll A. Bergamaschi, K. Nordlung, K. Avchachov, D. Flyura, C. Wagner, F. Mücklich, C. Pauly „Ru/Al Multilayers Integrate Maximum Energy Density and Ductility for Reactive Materials“ Scientific Reports   2015       accepted formated output
Mücklich, F. Engstler, M., Britz, D., Barrirero, J., Rossi, P. „Why We Need All Dimensions to Solve Both Very Old and Very New Questions in Materials at the Micro-, Nano- and Atomic Scales“ Practical Metallography 52 2015 9 507-524 doi: 10.3139/147.110360 published formated output
Holzapfel, C. Pauly, C. Engstler, M., Mücklich, F. „Electron beam characterization techniques for the study of wear in sliding contacts“ Electrical Contacts (Holm), 2015 IEEE 61st Holm Conference on Electrical Contacts   2015   227-234 doi: 10.1109/HOLM.2015.7355102 published formated output
K. Trinh E. Ramos-Moore, I. Green, C. Pauly, M. Zamanzade, F. Mücklich „Topographical and Microstructural Effects of Laser Surface Texturing on Tin-coated Copper Electrical Connectors under Load Cycling“ IEEE Transactions on Components, Packaging and Manufacturing Technology   2015       accepted formated output
Dalibón, E.L. Guitar, M.A., Trava-Airoldi, V., Mücklich, F., Brühl, S.P. „Plasma nitriding and DLC coatings for corrosion protection of precipitation hardening stainless steel“ Advanced Engineering Materials 18 2015 5 826-832 DOI: 10.1002/adem.201500411 published formated output
L. Reinert M. Zeiger, S. Suárez, V. Presser, F. Mücklich „Dispersion analysis of carbon nanotubes, carbon onions and nanodiamonds for their application as reinforcement phase in nickel metal matrix composites “ RSC Advances   2015   95149-95159 DOI: 10.1039/c5ra14310a published formated output
J. García T. Carvalho Miranda, Haroldo C. Pinto, F. Soldera, F. Mücklich „3D-FIB characterization of wear in WC-Co coated composites“ Materials Science Forum 825-826 2015   995-1000   published formated output
N. Souza M. Zeiger, V. Presser, F. Mücklich „In situ tracking of defect healing and purification of single-wall carbon nanotubes with laser radiation by time-resolved Raman spectroscopy“ RSC Advances 5 2015 76 62149 - 62159 doi:10.1039/C5RA09316C published formated output
M.A. Guitar H. Aboulfadl, C. Pauly, P. Leibenguth, S. Migot, F. Mücklich „Production of single-phase intermetallic films from Ru-Al multilayers“ Surface and Coatings Technology 244 2014   210-216 DOI: 10.1016/j.surfcoat.2014.02.022 published formated output
S. Suarez F. Lasserre, O. Prat, F. Mücklich „Processing and interfacial reaction evaluation in MWCNT/Ni composites“ physica status solidi (a) 211 2014 7 1555–1561 DOI: 10.1002/pssa.201431018 published formated output
F.L. Miguel R. Müller, M. Weinmann, R. Hempelmann, S. Mathur, F. Mücklich „Production and characterization of nanocomposite thin films based on Ni matrix reinforced with SnO2 single-crystalline nanowires for electrical contact applications“ Journal of Alloys and Compounds 603 2014   14-18 DOI: 10.1016/j.jallcom.2014.03.066 published formated output
J. Riedrich-Möller C. Arend, C. Pauly, F. Mücklich, M. Fischer, S. Gsell, M. Schreck, C. Becher „Deterministic coupling of a single silicon-vacancy color center to a photonic crystal cavity in diamond“ Nano Letters 14 2014 9 5281–5287 DOI: 10.1021/nl502327b published formated output
Y. Wang J. Ghanbaja, F. Soldera, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Controlling the preferred orientation in sputter-deposited Cu2O thin films: influence of the initial growth stage and homoepitaxial growth mechanism“ Acta Materialia 76 2014   207-212 DOI: 10.1016/j.actamat.2014.05.008 published formated output
S.-M. Liang M. Engstler, V. Groten, J. Barrirero, F. Mücklich, A. Bührig-Polaczek, R. Schmid-Fetzer „Key experiments and thermodynamic revision of the binary Al–Sr system“ Journal of Alloys and Compounds 610 2014   443-450 DOI: 10.1016/j.jallcom.2014.05.018 published formated output
E. Ramos-Moore C. Espinoza, R. S. Coelho, H. Pinto, P. Brito, F. Soldera, F. Mücklich, J. L. Garcia „Investigations on Thermal Stresses of a Graded Ti(C,N) Coating Deposited on WC-Co Hardmetal“ Advanced Materials Research 996 2014   848-854 DOI: 10.4028/www.scientific.net/AMR.996.848 published formated output
J. Kodolányia P. Hoppe, E. Gröner, C. Pauly, F. Mücklich „The Mg isotope composition of presolar silicate grains from red giant stars“ Geochimica et Cosmochimica Acta 140 2014   577-605 DOI: 10.1016/j.gca.2014.05.053 published formated output
R. Albrecht A. Bommer, C. Pauly, F. Mücklich, A. W. Schell, P. Engel, T. Schröder, O. Benson, J. Reichel, C. Becher „Narrow-band single photon emission at room temperature based on a single nitrogen-vacancy center coupled to an all-fiber-cavity“ Applied Physics Letters 105 2014 7   DOI: 10.1063/1.4893612 published formated output
R. Forsén I. C. Schramm, P. O. Å. Persson, F. Mücklich, M. Odén, N. Ghafoor „Nanostructuring and coherency strain in multicomponent hard coatings“ APL Materials 2 2014     DOI: 10.1063/1.4901125 published formated output
Y. Wang P. Miska, D. Pilloud, D. Horwat, F. Mücklich, J.F. Pierson „Transmittance enhancement and optial band gab widening of Cu2O thin films after air annealing“ Journal of Apllied Physics 115 2014 255   DOI: 10.1063/1.4865957 published formated output
W. Chamorro D. Horwat, P. Pigeat, P. Miska, S. Migot, F. Soldera, P. Boulet, F. Mücklich „Near-room temperature single-domain epitaxy of reactively sputtered ZnO films“ Journal of Physics D: Applied Physics 46 2013 255 1-7 DOI: 10.1088/0022-3727/46/23/235107 | PDF verfügbar published formated output
D. S. Rodríguez P. A. Arboleda, D. O. Russo, F. Soldera, C. J. R. González-Oliver, J. M. Rincón „Thermal behaviour of iron aluminium phosphate glasses containing UO2·67“ Glass Technology - European Journal of Glass Science and Technology Part A 54 2013 3 111-118   published formated output
B. Bax M. Schäfer, C. Pauly, F. Mücklich „Coating and prototyping of single-phase iron aluminide by laser cladding“ Surface and Coatings Technology 235 2013   773-777 DOI: 10.1016/j.surfcoat.2013.09.001 | PDF vorhanden published formated output
M. Engstler S. Mayer, C. Pauly, H. Clemens, F. Mücklich „3D characterization of an intermetallic β/γ-titanium aluminide alloy“ Advanced Engineering Materials 15 2013   1125-1128 DOI: 10.1002/adem.201300041 published formated output
A. Knutsson I.C. Schramm, k. Asp Grönhagen, F. Mücklich, M. Odén „Surface directed spinodal decomposition at TiAlN/TiN interfaces“ Journal of Applied Physics 113 2013     DOI: 10.1063/1.4795155, Article Number 114305 published formated output
D. Horwat M. Dehmas, A. Gutiérrez, J.-F. Pierson, A. Anders, F. Soldera, J.-L. Endrino „Efficient, Low Cost Synthesis of Sodium Platinum Bronze NaxPt3O4“ Chemistry of Materials 24 2012 13 2429-2432 DOI: dx.doi.org/10.1021/cm301179x | PDF verfügbar published formated output
G. Mitov S. D. Heintze, S. Walz, K. Woll, F. Mücklich, P. Pospiech „Wear Behavior of Dental Y-TZP Ceramic against Natural Enamel after Different Finishing Procedures“ Dental Materials 28 2012 8 909-918 DOI: 10.1016/j.dental.2012.04.010 | PDF verfügbar published formated output
B. Raillard C. Gachot, M. Hans, P. Leibenguth, F. Mücklich „Microstructural characterization of laser-irradiated bulk copper under dry sliding conditions“ Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226 2012 6 541-551 DOI: 10.1177/1350650112440924 | PDF verfügbar published formated output
B. Bax C. Pauly, P. Leibenguth, K. Woll, F. Mücklich „Synthesis of B2-RuAl coatings on mild steel by laser cladding“ Surface and Coatings Technology 206 2012 19 3931-3937 DOI: 10.1016/j.surfcoat.2012.03.063. | PDF verfügbar published formated output
J. Riedrich-Möller L. Kipfstuhl, C. Hepp, E. Neu, C. Pauly, F. Mücklich, A. Baur, M. Wandt, S. Wolff, M. Fischer, S. Gsell, M. Schreck, C. Becher „One- and two-dimensional photonic crystal microcavities in single crystal diamond“ Nature Nanotechnology 7 2012   69-74 DOI:10.1038/nnano.2011.190 | PDF verfügbar published formated output
D. Wibbing J. Binder, W. Schinköthe, C. Pauly, C. Gachot, F. Mücklich „Sensmili: Absolutes Wegmesssystem aus einer diffraktiven q-nären Pseudo-Zufalls-Sequenz“ Technisches Messen 79 2012   44-51 PDF verfügbar published formated output
G. Mitov J. Gessner, U. Lohbauer, K. Woll, F. Mücklich, P. Pospiech „Subcritical Crack Growth Behavior and Life Data Analysis of Two Types of Dental Y-TZP Ceramics“ Dental Materials 27 2011 7 684–691 DOI:10.1016/j.dental.2011.03.010 | PDF verfügbar published formated output
R. Catrin D. Horwat, J.-F. Pierson, S. Migot, Y. Hu, F. Mücklich „Nano-Scale and Surface Precipitation of Metallic Particles in Laser Interference Patterned Noble Metal Oxide Thin Films“ Applied Surface Science 257 2011 12 5223-5229 DOI:10.1016/j.apsusc.2010.11.060 | PDF verfügbar published formated output
D. Horwat D. I. Zakharov, J.-L. Endrino, F. Soldera, A. Anders, S. Migot, R. Karoum, P. Vernoux, J.-F. Pierson „Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition“ Surface and Coatings Technology 205 2011 2 171-177 DOI: 10.1016/j.surfcoat.2010.12.021. | PDF verfügbar published formated output
J. Pan H. Shen, U. Werner, J. D. Prades, F. Hernandez-Ramirez, F. Soldera, F. Mücklich, S. Mathur „Heteroepitaxy of SnO2 Nanowire Arrays on TiO2 Single Crystals: Growth Patterns and Tomographic Studies“ The Journal of Physical Chemistry C 115 2011 31 15191-15197 DOI: 10.1021/jp202685a. | PDF verfügbar published formated output
A. Hatton M. Engstler, P. Leibenguth, F. Mücklich „Characterization of Graphite Crystal Structure and Growth Mechanisms Using FIB and 3D Image Analysis“ Advanced Engineering Materials 13 2011 3 136-144 DOI: 10.1002/adem.201000234 | PDF verfügbar published formated output
J. García R. Pitonak, R. Weißenbacher, A. Köpf, F. Soldera, S. Suarez, F. Miguel, H. Pinto, A. Kostka, F. Mücklich „Design and Characterization of Novel Wear Resistant Multilayer CVD Coatings with Improved Adhesion Between Al2O3 and Ti(C,N)“ Advanced Engineering Materials 12 2010 9 929-934 DOI: 10.1002/adem.201000130 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, C. L. Teng, M. P. Ryan, U. Hartmann, F. Mücklich „EBSD Analysis of Electroplated Magnetite Thin Films“ Journal of Magnetism and Magnetic Materials 322 2010 9 1235-1238 presentation at JEMS’08 , September 14-19, 2008, Dublin, Ireland | DOI: 10.1016/j.jmmm.2009.03.028 | PDF verfügbar published formated output
K. Woll C. Holzapfel, F. Mücklich „Effects of composition and grain size on the interdiffusional behaviour in B2-RuAl intermetallic compound“ Intermetallics 18 2010 4 553-559 DOI:10.1016/j.intermet.2009.10.002 | PDF verfügbar published formated output
E. Detemple P. Leibenguth, C. Gachot, F. Mücklich „Large-Area Patterned Formation of Intermetallic Phases on Ti/Al Multilayer Systems by Laser Interference Metallurgy“ Thin Solid Films 519 2010 2 736-741 DOI:10.1016/j.tsf.2010.08.142 | PDF verfügbar published formated output
F. A. Lasagni A. Lasagni, I. Huertas-Olivares, C. Holazapfel, F. Mücklich „3D Nano-Characterisation of Materials by FIB-SEM/EDS Tomography“ IOP Conf. Series: Materials Science and Engineering 7 2010   012016 DOI:10.1088/1757-899X/7/1/012016 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, C. Holzapfel, M. Engstler, F. Mücklich „3D Microstructural Study of AlSi8Mg5 Alloy by FIB-Tomography“ Practical Metallography 47 2010 9 487-499 DOI: 10.3139/147.110088 published formated output
H. Shanak K.-H. Ehses, W. Götz, P. Leibenguth, R. Pelster „X-Ray Diffraction Investigations of α- Polyamide 6 Films: Orientation and Structural Changes upon Uni- and Biaxial Drawing“ Journal of Materials Science 44 2009 2 655-663 DOI: 10.1007/s10853-008-3062-7 | PDF verfügbar published formated output
C. Holzapfel F. Soldera, C. Vollmer, P. Hoppe, F. Mücklich „TEM Foil Preparation of Sub-micrometre Sized Individual Grains by Focused Ion Beam Technique“ Journal of Microscopy 235 2009   59-66 PDF verfügbar published formated output
J. J. Kochumalayil A. Meiser, F. Soldera, W. Possart „Focused Ion Beam Irradiation - Morphological and Chemical Evolution in PMMA“ Surface and Interface Analysis 41 2009   412-420 DOI: 10.1002/sia.3042 | PDF verfügbar published formated output
K. Woll P. Souza, A. Barnoush, F. Mücklich „RuAl Intermetallic Compound as Prospective Material for Functional Coating Applications“ Plansee Seminar 2009 Proceedings 1 2009   RM 35/1-RM 35/8   published formated output
F. G. Marro R. Chintapalli, P. Hvizdos, F. Soldera, F. Mücklich, M. Anglada „Study of Near Surface Changes in Yttria-doped Tetragonal Zirconia after Low Temperature Degradation“ International Journal of Materials Research 100 2009 1 92-96 PDF verfügbar published formated output
J. J. Kochumalayil A. Meiser, F. Soldera, W. Possart „Focused ion beam irradiation: morphological and chemical evolution in epoxy polymers“ Surface and Interface Analysis 41 2009   931-940 DOI: 10.1002/sia.3121 | PDF verfügbar published formated output
D. Acevedo A. Lasagni, M. Cornejo, M. Politano, C. Barbero, F. Mücklich „Large Area Fabrication of Tuned Polystyrene/Poly-methylmethacrylate Periodic Structures using Laser Interference Patterning“ Langmuir 25 2009 16 9624 DOI: 10.1021/la9007944 | PDF verfügbar published formated output
D. Bruch D. Henes, P. Leibenguth, C. Holzapfel „Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Forgings with Large Wall Thicknesses“ La Metallurgica Italiana   2008 6 7-13 17-19.06.2007, Grado, Italien published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, U. Hartmann, S. Murphy, I. V. Shvets „Study of Cross-sections of Magnetite Thin Films by Means of Electron-backscatter Diffraction“ Physica Status Solidi A 205 2008   1835-1838 DOI: 10.1002/pssa.200723634; presented at the 3rd Seeheim conference on magnetism, Frankfurt, Germany, 26.8.-30.8.2007 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, S. Murphy, F. Mücklich, I. V. Shvets „Microtexture of Magnetite Thin Films of (001) and (111) Orientation on MgO Substrates Studied by EBSD“ Journal of Applied Physics 103 2008 7 07E505 presented at the 52nd Magnetism and Magnetic Materials Conference, November 5-9, 2007, Tampa, USA | DOI: 10.1063/1.2837283 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, M. Engstler, H. P. Degischer, F. Mücklich „Nano-characterization of Cast Structures by FIB-Tomography“ Advanced Engineering Materials 10 2008 1 62-66 DOI: 10.1002/adem.200700249 | PDF verfügbar published formated output
N. Jeanvoine C. Holzapfel, F. Soldera, F. Mücklich „Microstructure Characterisation of Electrical Discharge Craters using FIB/SEM Dual Beam Techniques“ Advanced Engineering Materials 10 2008 10 973-977 DOI: 10.1002/adem.200800108 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, C. Holzapfel, F. Mücklich „Sample Preparation of Al-alloys for 3D-FIB Nano-characterization“ Practical Metallography 45 2008 5 246-250   published formated output
Y. Gaillard E. Jiménez-Piqué, F. Soldera, F. Mücklich, M. Anglada „Quantification of Hydrothermal Degradation in Zirconia by Nanoindentation“ Acta Materialia 56 2008 16 4206-4216 DOI: 10.1016/j.actamat.2008.04.050 | PDF verfügbar published formated output
M. Seyler C. Selzner, C. Holzapfel, F. Mücklich, W. F. Maier „Influence of Laser-induced Topography Changes on the Activity of Catalyst Coatings, Examined by Infrared Thermography“ Advanced Functional Materials 18 2008 8 1178 - 1185 DOI: 10.1002/adfm.200700770 | PDF verfügbar published formated output
T. Kaiser W. Sigle, D. Goll, N. H. Goo, V. Srot, P. A. van Aken, E. Detemple, W. Jäger „Transmission Electron Microscopy Study of the Intermixing of Fe--Pt Multilayers“ Journal of Applied Physics 103 2008 6 063913-1-063913-6 DOI: 10.1063/1.2884347 published formated output
M. R. Koblischka M. Winter, P. Das, U. Hartmann, A. Koblischka-Veneva, F. Mücklich „Nanostripes in GdBa2Cu3Ox High-Tc Superconductors“ Materials Science and Engineering B 151 2008   74-78 DOI: 10.1016/j.mseb.2008.02.010 | PDF verfügbar published formated output
A. Velichko C. Holzapfel, A. Siefers, K. Schladitz, F. Mücklich „Unambiguous Classificatio of Complex Microstructures by their Three-dimensional Parameters Applied to Graphite in Cast Iron“ Acta Materialia 56 2008 9 1981-1990   published formated output
A. Koblischka-Veneva C. Gachot, P. Leibenguth, F. Mücklich „Investigation of Microstructure of Bulk Ni2MnGa Alloy by Means of Electron Backscatter Diffraction Analysis“ Journal of Magnetism and Magnetic Materials 316 2007   e431-e434 presented at III JOINT EUROPEAN MAGNETIC SYMPOSIA, June 3026, 2006, San Sebastian, Spain published formated output
A. Koblischka-Veneva M. R. Koblischka, Y. Zhou, S. Murphy, F. Mücklich, U. Hartmann, I. V. Shvets „Electron Backscatter Diffraction Analysis Applied to (001) Magnetite Thin Films Grown on MgO Substrates“ Journal of Magnetism and Magnetic Materials 316 2007   e663-e665 presented at III JOINT EUROPEAN MAGNETIC SYMPOSIA, June 3026, 2006, San Sebastian, Spain published formated output
A. Koblischka-Veneva M. Koblischka, J. Wei, Y. Zhou, S. Murphy, F. Mücklich, U. Hartmann, I.V. Shvets „Misorientations in [0 0 1] Magnetite Thin Films Studied by Electron Backscatter Diffraction and Magnetic Force Microscopy“ Journal of Applied Physics 101 2007   09M507 presented at the 10th Joint MMM/Intermag 2007, January 7-11, 2007, Baltimore, Maryland published formated output
A. Velichko C. Holzapfel, F. Mücklich „3D Characterization of Graphite Morphologies in Cast Iron“ Advanced Engineering Materials 9 2007 1 39-45   published formated output
R. Szamocki A. Velichko, C. Holzapfel, F. Mücklich, S. Ravaine, P. Garrigues, N. Sojic, R. Hempelmann, A. Kuhn „Macroporous Ultramicroelectrodes for Improved Electroanalytical Measurements“ Analytical Chemistry 79 2007 2 533-539   published formated output
A. Lasagni C. Holzapfel, T. Weirich, F. Mücklich „Laser Interference Metallurgy: A New Method for Periodic Surface Microstructure Design on Multilayered Metallic Thin Films“ Applied Surface Science 253 2007   8070-8074   published formated output
C. Petersen A. Lasagni, C. Holzapfel, C. Daniel, F. Mücklich, M. Veith „SEM/TEM Characterization of Periodical Novel Amorphous/Nanocrystalline Micro-composites Obtained by Laser Interference Structuring: The System HAlO-Al·Al2O3“ Applied Surface Science 253 2007   8022-8027   published formated output
K. Woll C. Holzapfel, H. A. Gobran, F. Mücklich „Single-Phase Interdiffusion in B2-RuAl Intermetallic Compound“ Scripta Materialia 57 2007 1 1-4   published formated output
S. P. Harimkar C. Daniel, C. Holzapfel, P. Leibenguth, F. Mücklich, N. B. Dahotre „Validation of Crystallographic Correlation for Faceted Morphology in Laser Surface Engineered Alumina Ceramic“ Scripta Materialia 57 2007   401-404   published formated output
A. Koblischka-Veneva F. Mücklich, M. R. Koblischka, U. Hartmann, Y. Zhou, S. Murphy, I.V. Shvets „EBSD Analysis of the Growth of [001] Magnetite Thin Films on MgO Substrates“ Materials Science and Engineering B 144 2007   64-68 presented at E-MRS spring meeting 2007, Strasbourg, Symposium H, “Nanoscale tailoring of defect structures for optimized functional & multifunctional oxide films” published formated output
A. Koblischka-Veneva M. R. Koblischka, S. Murphy, S. K. Arora, F. Mücklich, U. Hartmann, I. V. Shvets „Misorientations in [0 0 1] Magnetite Thin Films Studied by Electron Backscatter Diffraction“ Microscopy and Microanalysis 13 2007 3 362-363 presented at MC2007, 2.-7.9.2007, Saarbrücken, Germany published formated output
R. Szamocki A. Velichko, F. Mücklich, S. Reculusa, S. Ravaine, S. Neugebauer, W. Schuhmann, R. Hempelmann, A. Kuhn „Improved enzyme immobilization for enhanced bioelectrocatalytic activity of porous electrodes“ Electrochemistry Communications 9 2007 8 2121-2127   published formated output
M. R. Koblischka A. Koblischka-Veneva, P. Das, T. Wolf, F. Mücklich, U. Hartmann „Nanostripes in (Nd,Eu,Gd)Ba2Cu3Ox (NEG) Single Crystals“ Microscopy and Microanalysis 13 2007 3 356-357 presented at MC2007, 2.-7.9.2007, Saarbrücken, Germany published formated output
F. Lasagni A. Lasagni, E. Marks, C. Holzapfel, F. Mu¨cklich, H.P. Degischer „Three-dimensional characterization of ‘as-cast’ and solution-treated AlSi12(Sr) alloys by high-resolution FIB tomography“ Acta Materialia 55 2007   3875-3882 DOI: 10.1016/j.actamat.2007.03.004 | PDF verfügbar published formated output
F. Lasagni A. Lasagni, C. Holzapfel, F. Mücklich, H. P. Degischer „Three Dinemsional Characterization of Unmodified and Sr-Modified Al-Si Eutectics by FIB and FIB EDX Tomography“ Advanced Engineering Materials 8 2006 8 719-723 DOI: 10.1002/adem.200500276 | PDF verfügbar published formated output
N. Jeanvoine C. Holzapfel, F. Soldera, F. Mücklich „3D-Investigations of Plasma Erosion Craters using FIB/SEM Dual-Beam Techniques“ Practical Metallography 43 2006 3 107-119   published formated output
A. Lasagni C. Holzapfel, F. Mücklich „Production of Two-Dimensional Periodical Structures by Laser Interference Irradiation on Metallic Thin Films“ Applied Surface Science 253 2006   1555-1560 DOI: 10.1016/j.apsusc.2006.02.041 | PDF verfügbar published formated output
A. Koblischka-Veneva C. Holzapfel, F. Mücklich, M. R. Koblischka, N. Hari Babu, D. A. Cardwell „Investigation of Grain Orientations of Melt-textured HTSC with Additions of Uranium Oxide, Y2O3 and Y2BaCuO5“ Journal of Physics: Conference Series 43 2006   527-530 DOI: 10.1088/1742-6596/43/1/130 | PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, F. Mücklich, Y. Zhou, S. Murphy, I.V. Shvets „Crystallographic Orientation Analyses of Magnetite Thin Films Using Electron Backscatter Diffraction (EBSD)“ IEEE Transactions on Magnetics 42 2006   2873-2875   published formated output
H.A. Gobran C. Holzapfel, F. Mücklich „Determination of Vacancy Concentration as a Function of Composition in the B2 Type RuAl Intermetallic Compound“ Scripta Materialia   2006       submitted formated output
M. Marx W. Schäf, H. Vehoff, C. Holzapfel „Interaction of Microcracks with Selected Interfaces: Focused Ion Beam for a Systematic Crack Initiation“ Materials Science and Engineering A 435-436 2006   595-601 DOI: 10.1016/j.msea.2006.07.042 | PDF verfügbar published formated output
N. Jeanvoine C. Holzapfel, F. Soldera, F. Mücklich „3D Investigations of Plasma Erosion Craters using FIB/SEM Dual- Beam Techniques“ Practical Metallography 43 2006 9 470-482 PDF verfügbar published formated output
A. Lasagni M. Seyler, C. Holzapfel, W. F. Maier, F. Mücklich „Periodical Gratings in Mixed Oxide Films by Laser Interference Irradiation“ Advanced Materials 17 2005   2228-2232 DOI: 10.1002/adma.200402074 | PDF verfügbar published formated output
A. Lasagni C. Holzapfel, F. Mücklich „Periodic Pattern Formation of Intermetallic Phases with Long Range Order by Laser Interference Metallurgy“ Advanced Engineering Materials 7 2005 6 487-492 DOI: 10.1002/adem.200400206 | PDF verfügbar published formated output
K. W. Liu C. Gachot, P. Leibenguth, F. Mücklich „Combinatorial Experiment in Ni-Ti Thin Films by Laser Interference Structuring“ Applied Surface Science 247 2005   550-555 DOI: 10.1016/j.apsusc.2005.01.123 | PDF verfügbar published formated output
V. Sivakov C. Petersen, C. Daniel, H. Shen, F. Mücklich, S. Mathur „Laser Induced Local and Periodic Phase Transformation in Iron Oxide Thin Films Obtained by Chemical Vapour Deposition“ Applied Surface Science 247 2005   513-517 DOI: 10.1016/j.apsusc.2005.01.088 | PDF verfügbar published formated output
F. Yu F. Mücklich, P. Li, H. Shen, S. Mathur, C.-M. Lehr, U. Bakowsky „In Vitro Cell Response to Polymer Surface Micropatterned by Laser Interference Lithography“ Biomacromolecules 6 2005   1160-1167 DOI: 10.1021/bm049324w | PDF verfügbar published formated output
M. Veith K. Andres, C. Petersen, C. Daniel, C. Holzapfel, F. Mücklich „Periodical Micro-Structuring of Hydride Containing Metastable Aluminiumoxide Using Laser Interference Metallurgy“ Advanced Engineering Materials 7 2005 1 27-30 DOI: 10.1002/adem.200400152 | PDF verfügbar published formated output
F. Yu P. Li, H. Shen, S. Mathur, C.-M. Lehr, U. Bakowsky, F. Mücklich „Laser Interference Lithography as a New and Efficient Technique for Micropatterning of Biopolymer Surface“ Biomaterials 26 2005 15 2307-2312 DOI: 10.1016/j.biomaterials.2004.07.021 | PDF verfügbar published formated output
C. Daniel F. Mücklich, J. Müller, P. Rehbein, V. Haas „Characterization of Periodic Micro-/Nano-Patterns for Wear Minimization of Electrical Contacts“ Practical Metallography 40 2003 8 377-386   published formated output
N. Ilic R. Rein, M. Göken, M. Kempf, F. Soldera, F. Mücklich „Properties of Eutectic Ru-Al Alloy Produced by Ingot Metallurgy“ Materials Science and Engineering A   2002   38-44 PDF verfügbar published formated output
A. Koblischka-Veneva M. R. Koblischka, P. Simon, F. Mücklich, M. Murakami „Application of Electron Backscatter Diffraction to Bulk High-TC Superconductors“ Superconductor Science and Technology 15 2002   796-802   published formated output
A. Koblischka-Veneva M. R. Koblischka, P. Simon, F. Mücklich, M. Murakami „Electron Backscatter Diffraction Study of Polycrystalline Yba2Cu3O7-x Ceramics“ Physica C 382 2002   311-322   published formated output
K. W. Liu F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig „Synthesis of Nanocrystalline B2 Structured (Ru,Ni)Al in the Ternary Ru-Al-Ni System by Mechanical Alloying and its Thermal Stability“ Materials Science and Engineering   2001   187-197   published formated output
K. W. Liu F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig „Synthesis of Nanocrystalline B2 Structured (Ru,Ir)Al in the Ternary Ru-Al-Ir System by Mechanical Alloying and its Thermal Stability“ Zeitschrift für Metallkunde 92 2001 8 924-930   published formated output
F. Mücklich J. Ohser, S. Blank, D. Katrakova, G. Petzow „Stereological Analysis of Grain Size and Grain Shape Applied to Silicon Nitride Ceramics“ Zeitschrift für Metallkunde 90 1999   557-561   published formated output
Y. Hao F. Mücklich, G. Petzow „Investigation of the Dislocation Structure in hcp Single Crystals by Means of the Rocking Crystal Method“ Acta Metallurgica Sinica 33 1997 2 198-206   published formated output
U. Scholz D. Plachke, W. Yuan, H.-J. Carstanjen, F. Mücklich, G. Petzow „On the Influence of Impurities in Beryllium Single Crystal Growth“ Journal of Crystal Growth 169 1996   575-577   published formated output
Y. Hao F. Mücklich, G. Petzow „Correlation between the Dislocation Configuration and the Related Scattering Behaviour of hcp Single Crystals by Application of the Fourier Transformation Approach“ Computational Materials Science 7 1996   167-172   published formated output
U. Scholz Z. S. Nikolic, F. Mücklich, G. Petzow „Determination and Modification of the Thermal Conditions in a Double Ellipsoid Mirror Furnace“ Journal of Crystal Growth 169 1996   578-581   published formated output
Y. Hao F. Mücklich, G. Petzow „Correlation between Scattering Behaviour of H.C.P. Single Crystals and Incorporated Dislocation Arrangement Quantified by the Fourier Transformation“ Physica Status Solidi A 158 1996 9 9-17   published formated output
F. Mücklich G. Petzow „Development of Beryllium Single Crystal Material for Monochromator Applications“ Mineral Proc. and Extract. Met. Rev. 13 1994   193-227   published formated output
F. Mücklich S. Hartmann, M. J. Hoffmann, G. A. Schneider, J. Ohser, G. Petzow „Quantitative Description of Silicon Nitride Microstructures“ Key Engineering Materials   1994   465-469   published formated output
F. Mücklich H. Oettel, G. Petzow „Realstruktur von Einkristallen und die Intensitäten von Braggreflexen“ Zeitschrift für Metallkunde 6 1993   419-425   published formated output
J. Li J. Barrirero, G. Sha, H. Aboulfadl, F. Mücklich, P. Schumacher „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia           submitted formated output



view full database







Publica (build 111206), (c) Lehrstuhl für Funktionswerkstoffe, Universität des Saarlandes, 2006. Konzept und Betreuung: Daniel Henry. Datenschutz, Impressum