Stand: 3.7.2018, 11:23



Benutzername: Passwort:


aktuelle Anzeige: Publications (peer-review), Eingrenzung: Co-Autor, Sortierung nach: Jahr - view full database
Vol
Jahr
No.
Seiten
 
E. Roitero M. Ochoa, M. Anglada, F. Mücklich, E. Jiménez-Piqué „Low temperature degradation of laser patterned 3Y-TZP: Enhancement of resistance after thermal treatment“ Journal of the European Ceramic Society 38 2018   1742-1749 10.1016/j.jeurceramsoc.2017.10.044 published formated output
S. Fang C.-J. Hsu, S. Klein, L. Llanes, D. Bähre, F. Mücklich „Influence of Laser Pulse Number on the Ablation of Cemented Tungsten Carbides (WC-CoNi) with Different Grain Size“ Lubricants 6 2018     doi:10.3390/lubricants6010011 published formated output
M. Linz M. Rodríguez Ripoll, C. Pauly, J. Bernardi, A. Steiger-Thirsfeld, F. Franek, F. Mücklich, C. Gachot „Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic-Pearlitik Steel durin Lubricated Sliding“ Advanced Engineering Materials   2018       submitted formated output
I. El Azhari J. Garcia M. Zamanzade, F. Soldera, C. Pauly, L. Llanes, F. Mücklich „Investigations on micro-mechanical properties of polycrystalline Ti(C, N) and Zr(C,N) coatings“ Acta Materialia 149 2018   364-376   published formated output
Zea, L Nisar, Z., Rubin, P., Cortesao, M., Luo, J., McBride, S.A., Moeller, R., Klaus, D., Müller, D., Varanasi, K.K., Mücklich, F., Stodieck, L. „Design of a spaceflight biofilm experiment“ Acta Astronautica 148 2018 148 294-300 DOI: 10.1016/j.actaastro.2018.04.039 published formated output
E. Roitero M. Anglada, F. Mücklich, E. Jiménez-Piqué „Mechanical reliability of dental grade zirconia after laser patterning“ Journal of Mechanical Behavior of Biomedical Materials 86 2018   257-263   published formated output
P. Grützmacher A. Rosenkranz, A. Szurdak, F. König, G. Jacobs, G. Hirt, F. Mücklich „From lab to application - Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns“ Tribology International 127 2018   500-508   published formated output
K. Khurana F. Müller, K. Jacobs, T. Faidt, J.-U.Neurohr, S. Grandthyll, F. Mücklich, C. Canal, M. Pau Ginebra „Plasma polymerized bioceramics for drug delivery: Do surface changes alter biological behaviour?“ European Polymer Journal 107 2018   25-33   published formated output
E. Roitero F. Lassere, M. Anglada, F. Mücklich, E. Jiménez-Piqué „A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality“ Dental Materials 33 2017   pp. e28-e38   published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, P. Eklund, J. Schmauch, F. Mücklich, M. Odén „Solid state formation of Ti4AlN3 in cathodic arc deposited (Ti1−xAlx)Ny alloys“ Acta Materialia 129 2017   268-277   published formated output
D. Britz J. Webel, A. S. Schneider, F. Mücklich „Identifying and quantifying mricrostructures in low-alloyed steels: a correlative approach“ Metallurgia Italiana 3 2017   5 - 10   published formated output
Y. Wang J. Ghanbaja, S. Bruyère, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Room temperature self-assembled growth of vertically aligned columnar copper oxide nanocomposite thin films on unmatched substrates“ Scientific Reports 7   2017   1-9 DOI:10.1038/s41598-017-10540-6 published formated output
I. C. Schramm C. Pauly, M.P. Johansson Joesaar, S. Slawik, S. Suarez, F. Mücklich, M. Odén „Effects of nitrogen vacancies on phase stability and mechanical properties of arc deposited (Ti0.52Al0.48)Ny (y < 1) coatings“ Surface & Coatings Technology 330 2017   77-86 DOI: 10.1016/j.surfcoat.2017.09.043 published formated output
J. J. Roa H. Aboulfadl, J. Barrirero, M. Turon-Vinas, F. Mücklich, M. Anglada „Chemical segregation in a 12Ce-ZrO2/3Y-ZrO2 cermanic composite“ Mater. Charact. 132 2017   83-91   published formated output
P.K. Yalamanchili F. Wang, I. Schramm, J.M. Andersson, M.P.J. Joesaar, F. Tasnádi, F. Mücklich, N. Ghafoor, M. Odén „Exploring the high entropy alloy concept in (AlTiVNbCr)N“ Thin Solid Films 636 2017   346-352   published formated output
K.M. Calamba I.C. Schramm, M.P. Johansson Joesaar, J. Ghanbaja, J.F. Pierson, F. Mücklich, M. Odén „Enhanced thermal stability and mechanical properties of nitrogen deficient titanium aluminum nitride (Ti0.54AI0.46Ny) thin films by tuning the applied negative bias voltage“ Journal of Applied Physics 122 2017 255     published formated output
Y.H. Chen L. Rogström, J.J. Roa, J.Q. Zhu, I.C. Schramm, L.J.S. Johnson, N. sChell, F. Mücklich, M.J. Anglada, M. Odén „Thermal and mechanical stability of wurtzite-ZrAIN/cubic-TiN and wurzite-ZrAIN/cubic-ZrN multilayers“ Surface and Coatings Technology 324 2017 255     published formated output
D. Britz J. Webel, J. Gola, F. Mücklich „A Correlative Approach to Capture and Quantify Substructures by Means of Image Registration“ Practical Metallography 54 2017 10 685-696   published formated output
E. Raoms-Moore A. Rosenkranz, L.F.Matamala, A. Videla, A. Duran, J. Ramos-Grez „Effect of Surface Etsching and Electrodeposition of Copper on Nitinol“ IOP Conference Series: Materials Science and Engineering 258 2017   1-9   published formated output
T. Prill D. Jeulin, F. Willot, J. Balach, F. Soldera „Prediction of Effective Properties of Porous Carbon Electrodes from a Parametric 3D Random Morphological Model“ Transport in Porous Media 120 2017 1 120-141 https://doi.org/10.1007/s11242-017-0913-1 published formated output
A. Rosenkranz A. Stratmann, C. Gachot, G. Burghardt, G. Jacobs, F. Mücklich „Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three Beam Laser Interference“ Advanced Engineering Materials 18 2016 5 854-862 DOI: 10.1002/adem.201500320 published formated output
Li, J.H. Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F., Schumacher, P. „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia 108 2016   207 - 218 doi:10.1016/j.actamat.2016.01.053 published formated output
A.I. Kovalev A. Rashkovskiy, Yu., D. L. Wainstein, R. Gago, F. Soldera, J. L. Endrino „Influence of electronic structure, plasmon-phonon and plasmon-polariton excitations on anomalously low heat conductivity in TiAlN/Ag nanoscale multilayer coatings“ Current Applied Physics 16 2016 4 459-468 DOI: 10.1016/j.cap.2016.01.012 published formated output
Y. Wang J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2016   1732 DOI: 10.1039/c5ce02419f published formated output
T. Dahmen M. Engstler, C. Pauly, P. Trampert, N. de Jonge, F. Mücklich, P. Slusallek „Feature Adaptive Sampling for Scanning Electron Microscopy“ Scientific Reports Nature Publishing Group   2016     DOI: 10.1038/srep25350 published formated output
A. I. Kovalev D. L. Wainstein, A. Y. Rashkovskiy, R. Gago, F. Soldera, J. L. Endrino „The confinement of phonon propagation in TiAIN/Ag multilayer coatings with anomalously low heat conductivity“ Applied Physics Letters 108 2016     doi.org/10.1063/1.4953230 published formated output
A. Bachmaier J. Schmauch, H. Aboulfadl, A. Verch, C. Motz „On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu-Co alloy system during high-pressure torsion“ Acta Materialia 115 2016   333-346 doi:10.1016/j.actamat.2016.06.010 published formated output
S.A. Brinkmann M. Frensemeier, C.M. Laursen, H.J. Maier, D.Britz, A.S. Schneider, F. Mücklich, C.P. Frick „Effect of Indentation Temperature on Nickel-Titanium Indentation-Induced Two-Way Shape-Memory Surfaces“ Materials Science & Engineering A   2016     doi: http://dx.doi.org/10.1016/j.msea.2016.08.036 accepted formated output
C. M. Menezes N. Bogoni Jr., J. Barrirero, H. Aboulfadl, F. Mücklich, C. A. Figueroa „Influence of the surface chemistry - structure relationship on the nanoscale friction of nitrided and post-oxidized iron“ Surface & Coatings Technology   2016     10.1016/j.surfcoat.2016.07.095 in press formated output
I. C. Schramm M. P. Johansson Jõesaar, J. Jensen, F. Mücklich, M. Odén „Impact of nitrogen vacancies on the high temperature behavior of (Ti1-xAlx)Ny alloys“ Acta Materialia 119 2016   218-228   published formated output
Y. Motemani D. Khare, A. Savan, M. Hans, A. Paulsen, J. Franzel, C. Somsen, F. Mücklich, G. Eggeler, A. Ludwig „Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition“ Nanotechnology 27 2016   495604   published formated output
A. Rosenkranz J. C. Pangraz, C. Gachot, F. Mücklich „Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning“ Wear 368-369 2016   350-357 DOI: 10.1016/j.wear.2016.10.008 published formated output
K. Yalamanchili F. Wang, H. Aboulfadl, J. Barrirero, L. Rogström, E. Jiménez-Pique, F. Mücklich, F. Tasnadi, M. Odén, N. Ghafoor „Growth and thermal stability of TiN/ZrAlN: Effect of internal interfaces“ Acta Materialia 121 2016   396 - 406 doi:10.1016/j.actamat.2016.07.006 published formated output
C. Gachot CJ Hsu, S Suarez, P Grützmacher, A Rosenkranz, A Stratmann, G Jacobs „Microstructural and Chemical Characterization of the Tribolayer Formation in Highly Loaded Cylindrical Roller Thrust Bearings“ Lubricants 4 2016 2 19 DOI:10.3390/lubricants4020019 published formated output
W. Chamorro J. Ghanbaja, Y. Battie, A. en Naciri, F. Soldera, F. Mücklich, D. Horwat „Local Structure-Driven Localized Surface Plasmon Absorption and Enhanced Photoluminescence in ZnO-Au thin Films“ Journal of Physical Chemistry   2016       accepted formated output
J. Barrirero J. Li, M. Engstler, N. Ghafoor, P. Schumacher, M. Odén, F. Mücklich „Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys“ Scripta Materialia 117 2016   16-19 DOI: 10.1016/j.scriptamat.2016.02.018 published formated output
N. Shulumba O. Hellman, Z. Raza, B. Alling, J. Barrirero, F. Mücklich, I.A. Abrikosov, M. Odén „Lattice Vibrations Change the Solid Soubility of an Alloy at High Temperatures“ Phy. Rev. Lett. 117 2016   205502   published formated output
Y. Wang S. Lany, J. Ghanbaja, Y. Fagot-Revurat, Y.P. Chen, F. Soldera, D. Horwat, F. Mücklich, J.F. Pierson „Electronic structures of Cu2O, Cu4O3, and CuO: A joint experimental and theoretical study“ Physical Review B 94 2016 255   DOI: 10.1103/PhysRevB.94.245418 published formated output
T. Dahmen N. de Jonge, P. Trampert, M. Engstler, C. Pauly, F. Mücklich, P. Slusallek „"Smart Microscopy" Feature based adaptive ampling for Forcused Ion Beam Scanning Electron Microscopy“ Microscopy and Microanalysis 22 2016   632   published formated output
A. I. Kovalev D.L. Wainstein, A. Yu. Rashkovskiy, R. Gago, F. Soldera, J. I. Endrino, G. S. Fox-Rabinovich „Interface-Induced Plasmon Nonhomogeneity in Nanostructured Metal-Dielctric Planar Metamaterial“ Journal of Nanomaterials   2015     DOI:10.1155/2015/876247, art. no. 876247, Open Access Publication published formated output
A. Rosenkranz S. Jaeger, C. Gachot, S. Vogel, F. Mücklich „Wear behavior of laser-patterned piston rings in squeeze film dampers“ Advanced Engineering Materials 17 2015 8 1208-1214 DOI: 10.1002/adem.201400481 published formated output
A. Rosenkranz L. Reinert, C. Gachot, H. Aboulfadl, S. Grandthyll, K. Jacobs, F. Müller, F. Mücklich „Oxide formation, morphology and nanohardness of laser-patterned steel surfaces“ Advanced Engineering Materials 17 2015 8 1234-1242 DOI: 10.1002/adem.201400487 published formated output
J. H. Li J. Barrirero, M. Engstler, H. Aboulfadl, F. Mücklich, P. Schumacher „Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition“ Metallurgical and Materials Transactions A 46 2015 3 1300-1311 DOI: 10.1007/s11661-014-2702-6 published formated output
M. Martinez Mirò M. Veith, J. Lee, F. Soldera, F. Mücklich, R. Bennewitz, C. Aktas „3D and 2D structural characterization of 1D Al/Al2O3 biphasic nanostructures“ Journal of Microscopy 258 2015 2 113-118 DOI: 10.1111/jmi.12221 published formated output
Y. Wang J. Ghanbaja, F. Soldera, S. Migot, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Tuning the structure and preferred orientation in reactively sputtered copper oxide thin films“ Applied Surface Science 335 2015   85-91 DOI:10.1016/j.apsusc.2015.02.028 published formated output
K. Yalamanchili I.C. Schramm, E. Jiménez-Piqué, L. Rogström, F. Mücklich, M. Odén, N. Ghafoor „Tuning hardness and fracture resistance of ZrN/Zr0.63Al0.37N nanoscale multilayers by stress-induced transformation toughening“ Acta Materialia 89 2015   22-31 DOI:10.1016/j.actamat.2015.01.066 published formated output
Hans, M. Rojan, A.-L., Mücklich, F. „Imaging Structural Damage of Bacteria on antibacterial Copper - a Scanning Electron Microscopy Study Using FIB Cross-Sectioning“ Pract. Metallogr. 52 2015 4 205-213   published formated output
E.A. Alvarez C.G. Oliver, F. Soldera, J.L. García „Densification and FIB, SEM, TEM Microstructures of WC Composites with Fe or Co Matrices“ Procedia Materials Science 8 2015   406-413   published formated output
J.-F. Pierson Y. Wang, J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich „Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ CrystEngComm 18 2015   1732-1739   published formated output
Mücklich, F. Engstler, M., Britz, D., Barrirero, J., Rossi, P. „Why We Need All Dimensions to Solve Both Very Old and Very New Questions in Materials at the Micro-, Nano- and Atomic Scales“ Practical Metallography 52 2015 9 507-524 doi: 10.3139/147.110360 published formated output
J. Riedrich-Möller S. Pezzagna, J. Meijer, C. Pauly, F. Mücklich, M. Markham, A. Edmonds, C. Becher „Nanoimplantation and Purcell enhancement of single nitrogen-cacany center in photonic crystal cavities in diamond“ Applied Physics Letters 106 2015   221103   published formated output
Y. Wang J. Ghanbaja, F. Soldera, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson „Controlling the preferred orientation in sputter-deposited Cu2O thin films: influence of the initial growth stage and homoepitaxial growth mechanism“ Acta Materialia 76 2014   207-212 DOI: 10.1016/j.actamat.2014.05.008 published formated output
S.-M. Liang M. Engstler, V. Groten, J. Barrirero, F. Mücklich, A. Bührig-Polaczek, R. Schmid-Fetzer „Key experiments and thermodynamic revision of the binary Al–Sr system“ Journal of Alloys and Compounds 610 2014   443-450 DOI: 10.1016/j.jallcom.2014.05.018 published formated output
J. Barrirero M. Engstler, N. Ghafoor, N. de Jonge, M. Odén, F. Mücklich „Comparison of segregations formed in unmodified and Sr-modified Al-Si alloys studied by atom probe tomography and transmission electron microscopy“ Journal of Alloys and Compounds 611 2014   410-421 DOI: 10.1016/j.jallcom.2014.05.121 published formated output
M. Hans J. C. Támara, S. Mathews, B. Bax, A. Hegetschweiler, R. Kautenburger, M. Solioz, F. Mücklich „Laser cladding of stainless steel with a copper–silver alloy to generate surfaces of high antimicrobial activity“ Applied Surface Science 320 2014   195-199 DOI: 10.1016/j.apsusc.2014.09.069 published formated output
E. Ramos-Moore C. Espinoza, R. S. Coelho, H. Pinto, P. Brito, F. Soldera, F. Mücklich, J. L. Garcia „Investigations on Thermal Stresses of a Graded Ti(C,N) Coating Deposited on WC-Co Hardmetal“ Advanced Materials Research 996 2014   848-854 DOI: 10.4028/www.scientific.net/AMR.996.848 published formated output
T. Gries R. Catrin, S. Migot, F. Soldera, J.-L. Endrino, A. R. Landa-Canovas, F. Cleymand, D. Mangin, F. Mücklich, D. Horwat „Local Modification of the Microstructure and Electrical Properties of Multifunctional Au–YSZ Nanocomposite Thin Films by Laser Interference Patterning“ Applied Material Interfaces 6 2014 16 13707–13715 DOI: 10.1021/am503160w published formated output
R. Albrecht A. Bommer, C. Pauly, F. Mücklich, A. W. Schell, P. Engel, T. Schröder, O. Benson, J. Reichel, C. Becher „Narrow-band single photon emission at room temperature based on a single nitrogen-vacancy center coupled to an all-fiber-cavity“ Applied Physics Letters 105 2014 7 73113 DOI: 10.1063/1.4893612 published formated output
F. Mücklich J. Webel, H. Aboulfadl, N. Lindow, H.-C. Hege „Correlative Tomography - Extraction of Reliable Information with Adequate Resolution from mm Scale Down to Sub-nm Scale“ Microscopy and Microanalysis 20 2014   838-839 DOI: http://dx.doi.org/10.1017/S1431927614005911 published formated output
Y. Wang P. Miska, D. Pilloud, D. Horwat, F. Mücklich, J.F. Pierson „Transmittance enhancement and optial band gab widening of Cu2O thin films after air annealing“ Journal of Apllied Physics 115 2014 255   DOI: 10.1063/1.4865957 published formated output
R. Gago F. Soldera, R. Hübner, J. Lehmann, F. Munnik, L. Vázquez, A. Redondo-Cubero, J.L. Endrino „X-ray absorption near-edge structure of hexagonal ternary phases in sputter-deposited TiAlN films“ Journal of Alloys and Compounds 561 2013   87-94 DOI: 10.1016/j.jallcom.2013.01.130 | PDF verfügbar published formated output
B. Raillard J. Rémond, E. Ramos-Moore, N. Souza, C. Gachot, F. Mücklich „Wetting Properties of Steel Surfaces Modified by Laser Interference Metallurgy“ Advanced Engineering Materials 15 2013 5 341-346 DOI: 10.1002/adem.201200247 | PDF verfügbar published formated output
D. S. Rodríguez P. A. Arboleda, D. O. Russo, F. Soldera, C. J. R. González-Oliver, J. M. Rincón „Thermal behaviour of iron aluminium phosphate glasses containing UO2·67“ Glass Technology - European Journal of Glass Science and Technology Part A 54 2013 3 111-118   published formated output
D. Horwat M. Dehmas, A. Gutiérrez, J.-F. Pierson, A. Anders, F. Soldera, J.-L. Endrino „Efficient, Low Cost Synthesis of Sodium Platinum Bronze NaxPt3O4“ Chemistry of Materials 24 2012 13 2429-2432 DOI: dx.doi.org/10.1021/cm301179x | PDF verfügbar published formated output
E. Jiménez-Piqué A. Ramos, J. A. Muñoz-Tabares, A. Hatton, F. Soldera, F. Mücklich, M. Anglada „Focused ion beam tomography of zirconia degraded under hydrothermal conditions“ Journal of the European Ceramic Society 32 2012 10 2129-2136 DOI:10.1016/j.jeurceramsoc.2012.02.011 | PDF verfügbar published formated output
D. Wibbing J. Binder, W. Schinköthe, C. Pauly, C. Gachot, F. Mücklich „Sensmili: Absolutes Wegmesssystem aus einer diffraktiven q-nären Pseudo-Zufalls-Sequenz“ Technisches Messen 79 2012   44-51 PDF verfügbar published formated output
G. Mitov J. Gessner, U. Lohbauer, K. Woll, F. Mücklich, P. Pospiech „Subcritical Crack Growth Behavior and Life Data Analysis of Two Types of Dental Y-TZP Ceramics“ Dental Materials 27 2011 7 684–691 DOI:10.1016/j.dental.2011.03.010 | PDF verfügbar published formated output
R. Catrin D. Horwat, J.-F. Pierson, S. Migot, Y. Hu, F. Mücklich „Nano-Scale and Surface Precipitation of Metallic Particles in Laser Interference Patterned Noble Metal Oxide Thin Films“ Applied Surface Science 257 2011 12 5223-5229 DOI:10.1016/j.apsusc.2010.11.060 | PDF verfügbar published formated output
D. Horwat D. I. Zakharov, J.-L. Endrino, F. Soldera, A. Anders, S. Migot, R. Karoum, P. Vernoux, J.-F. Pierson „Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition“ Surface and Coatings Technology 205 2011 2 171-177 DOI: 10.1016/j.surfcoat.2010.12.021. | PDF verfügbar published formated output
J. Pan H. Shen, U. Werner, J. D. Prades, F. Hernandez-Ramirez, F. Soldera, F. Mücklich, S. Mathur „Heteroepitaxy of SnO2 Nanowire Arrays on TiO2 Single Crystals: Growth Patterns and Tomographic Studies“ The Journal of Physical Chemistry C 115 2011 31 15191-15197 DOI: 10.1021/jp202685a. | PDF verfügbar published formated output
F. Müller C. Zeitz, H. Mantz, K.-H. Ehses, F. Soldera, J. Schmauch, M. Hannig, S. Hüfner, K. Jacobs „Elemental Depth Profiling of Fluoridated Hydroxyapatite: Saving Your Dentition by the Skin of Your Teeth?“ Langmuir 26 2010 24 18750-18759 DOI: 10.1021/la102325e | PDF verfügbar published formated output
C.J.R. González Oliver F.C. Lovey, A. Caneiro, D.O. Russo, D.S. Rodríguez, F. Soldera, J. E. Fiscina, J. Ma. Rincón „Crystallization of iron phosphate glasses containing up to 19 wt.% UO2.67“ Journal of Non-Crystalline Solids 356 2010 52 2986-2993 DOI:10.1016/j.jnoncrysol.2010.06.034 | PDF verfügbar published formated output
D.F. Acevedo G. Martínez, J. T. Arana, E.I. Yslas, F. Mücklich, C. Barbero, H. J. Salavagione „Easy Way to Fabricate Nanostructures on a Reactive Polymer Surface“ Journal of Physical Chemistry B 113 2009 44 14661-14666 DOI:10.1021/jp9074515 | PDF verfügbar published formated output
D. Acevedo A. Lasagni, M. Cornejo, M. Politano, C. Barbero, F. Mücklich „Large Area Fabrication of Tuned Polystyrene/Poly-methylmethacrylate Periodic Structures using Laser Interference Patterning“ Langmuir 25 2009 16 9624 DOI: 10.1021/la9007944 | PDF verfügbar published formated output
M. Duarte A. Lasagni, R. Giovanelli, J. Narciso, E. Louis, F. Mücklich „Increasing Lubricant Lifetime by Grooving Periodical Patterns using Laser Interference Metallurgy“ Advanced Engineering Materials 10 2008 6 554-558 DOI: 10.1002/adem.200700321 | PDF verfügbar published formated output
A. Lasagni M. Cornejo, F. Lasagni, F. Mücklich „Laser Ablation Modeling of Periodic Pattern Formation on Polymer Substrates“ Advanced Engineering Materials 10 2008 5 488-493 DOI: 10.1002/adem.200700323 | PDF verfügbar published formated output
Y. Gaillard E. Jiménez-Piqué, F. Soldera, F. Mücklich, M. Anglada „Quantification of Hydrothermal Degradation in Zirconia by Nanoindentation“ Acta Materialia 56 2008 16 4206-4216 DOI: 10.1016/j.actamat.2008.04.050 | PDF verfügbar published formated output
T. Kaiser W. Sigle, D. Goll, N. H. Goo, V. Srot, P. A. van Aken, E. Detemple, W. Jäger „Transmission Electron Microscopy Study of the Intermixing of Fe--Pt Multilayers“ Journal of Applied Physics 103 2008 6 063913-1-063913-6 DOI: 10.1063/1.2884347 published formated output
A. Koblischka-Veneva M. R. Koblischka,  D. Lisjak,  D. Makovec, F. Mücklich „Texture analysis of ferrite materials by means of electron backscatter diffraction (EBSD)“ IEEE Transactions on Magnetics   2008   1072 PDF verfügbar published formated output
C. Selzner N. Jeanvoine, A. Velichko, F. Mücklich „Untersuchung des Erosionsverhaltens von silberbasierten Kontaktwerkstoffen mittels FIB-Techniken“ Sonderheft Materialwissenschaft und Werkstofftechnik   2008       published formated output
A. Koblischka-Veneva M. Koblischka, J. Wei, Y. Zhou, S. Murphy, F. Mücklich, U. Hartmann, I.V. Shvets „Misorientations in [0 0 1] Magnetite Thin Films Studied by Electron Backscatter Diffraction and Magnetic Force Microscopy“ Journal of Applied Physics 101 2007   09M507 presented at the 10th Joint MMM/Intermag 2007, January 7-11, 2007, Baltimore, Maryland published formated output
R. Szamocki A. Velichko, C. Holzapfel, F. Mücklich, S. Ravaine, P. Garrigues, N. Sojic, R. Hempelmann, A. Kuhn „Macroporous Ultramicroelectrodes for Improved Electroanalytical Measurements“ Analytical Chemistry 79 2007 2 533-539   published formated output
D. Jankovic-Ilic J. Fiscina, C.G. Oliver, N. Ilic, F. Mücklich „Self Formed Cu-W Finctionally Graded Material Produced via Powder Segregation“ Advanced Engineering Materials 9 2007 7 542-546   published formated output
F. Soldera N. Jeanvoine, K. Trinh, F. Mücklich „Investigation of the Structure of Plasma Erosions Craters using a SEM/FIB Dual Beam Workstation“ Microscopy and Microanalysis 13 2007 3 422-423 DOI: 10.1017/S1431927607082116 | PDF verfügbar published formated output
A. Lasagni M. Nejati, R. Clasen, F. Mücklich „Periodical Surface Structuring of Metals by Laser Interference Metallurgy as a New Fabrication Method of Textured Solar Selective Absorbers“ Advanced Engineering Materials 6 2006 8 580-584 DOI: 10.1002/adem.200500261 | PDF verfügbar published formated output
C. Daniel T. J. Balk, T. Wübben, F. Mücklich „Bio-Mimetic Scaling of Mechanical Behavior of Thin Films, Coatings and Surfaces by Laser Interference Metallurgy“ Advanced Engineering Materials 7 2005 9 823-826 DOI: 10.1002/adem.200500110 | PDF verfügbar published formated output
N. Ilic F. Soldera, F. Mücklich, M. T. Jovanovic „Oxidation Behavior of Ru(Al)-RuAl Intermetallic Eutectics Produced by Ingot and Powder Metallurgy“ Intermetallics 13 2005 5 444-453 DOI: 10.1016/j.intermet.2004.06.010 | PDF verfügbar published formated output
J. Fiscina D. Jankovic-Ilic, F. Mücklich „Applying the Brazil Nut Approach to Manufacture W-Cu Graded Materials“ Granular Matter 6 2004   207-213   published formated output
M. R. Koblischka A. Koblischka-Veneva, E.S. Reddy, G. J. Schmitz, K. Ogasawara, M. Murakami „Orientations of Y2BaCuO5 and YBCO within Melt-textured and Directional Solidified Samples Studied by EBSD“ Physica C 392 2003   589-595   published formated output
C. Daniel F. Mücklich, J. Müller, P. Rehbein, V. Haas „Characterization of Periodic Micro-/Nano-Patterns for Wear Minimization of Electrical Contacts“ Practical Metallography 40 2003 8 377-386   published formated output
F. Mücklich J. Ohser, S. Blank, D. Katrakova, G. Petzow „Stereological Analysis of Grain Size and Grain Shape Applied to Silicon Nitride Ceramics“ Zeitschrift für Metallkunde 90 1999   557-561   published formated output
F. Mücklich J. Ohser, G. Schneider „Die Charakterisierung homogener polyedrischer Gefüge mit Hilfe des räumlichen Poisson-Voronoi-Mosaiks und der Vergleich zur DIN 50 601“ Zeitschrift für Metallkunde 88 1997 1 27-32   published formated output
U. Scholz D. Plachke, W. Yuan, H.-J. Carstanjen, F. Mücklich, G. Petzow „On the Influence of Impurities in Beryllium Single Crystal Growth“ Journal of Crystal Growth 169 1996   575-577   published formated output
F. Mücklich H. Janocha „Smart Materials - The 'IQ' of Materials in Systems“ Zeitschrift für Metallkunde 87 1996 5 357-364   published formated output
F. Mücklich S. Hartmann, M. J. Hoffmann, G. A. Schneider, J. Ohser, G. Petzow „Quantitative Description of Silicon Nitride Microstructures“ Key Engineering Materials   1994   465-469   published formated output
J. Li J. Barrirero, G. Sha, H. Aboulfadl, F. Mücklich, P. Schumacher „Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ Acta Materialia           submitted formated output
A. I. Kovalev D. L. Wainstein, V. O. Vakhrushev, R. Gago, F. Soldera, J. L. Endrino, G. S. Fox-Rabinovich, S. Veldhuis „Features of electronic and lattice mechanisms of transboundary heat transfer in multilayer nanolaminate TiAlN/Ag coatings“ Scientific Reports 7     17078 DOI:10.1038/s41598-017-17291-4 published formated output



view full database







Publica (build 111206), (c) Lehrstuhl für Funktionswerkstoffe, Universität des Saarlandes, 2006. Konzept und Betreuung: Daniel Henry. Datenschutz, Impressum