|
Co-Autor |
|
|
Vol |
|
No. |
Seiten |
|
|
|
T. Recktenwald |
Z. Liu, T. Laurent, F. Mücklich |
„Quantitative Analyse laserstrukturierter Oberflächen“ |
Special Issue of Practical Metallography |
32 |
2001 |
|
145 - 150 |
|
published |
|
F. Mücklich |
Y. Hao, G. Petzow |
„Development of Tailored Optical Materials with X-ray Transparency“ |
Proc. Euromat ‘95, Assoz. Ital. di Metallurgia, Milano |
4 |
1995 |
|
305 - 310 |
|
published |
|
F. Mücklich |
U. Scholz, G. Petzow |
„Defect Formation in Single Crystalline Beryllium“ |
Proceedings of the International Symposium on Beryllium for Fusion Applications, Ed.: M. Dalle Donne, Karlsruhe KfK 5271 |
|
1994 |
|
62 - 87 |
ISSN 0303-4003 |
published |
|
F. Mücklich |
T. Recktenwald, Z. Liu |
„Nano-Micro Structured Surfaces by Interference of Laser Beams“ |
Proceedings EUROMAT 2001, Rimini,Symposium Surface Engineering Processes and Application |
|
2001 |
|
|
ISBN 88-85298-39-7 |
published |
|
M. Leidner |
S. Thoss, H. Schmidt, L. Reinert, K. Trinh, C Schäfer, F. Mücklich |
„Verbesserung der tribologischen und elektrischen Eigenschaften von Zinn-Kontaktoberflächen durch Partikel/Schmierstoff-Einbettung mittels Laser-Texturierung“ |
6th Symposium Connectors, Lemgo |
|
2017 |
|
59 - 67 |
|
published |
|
P. Leibenguth |
S. Slawik, F. Mücklich, H. Welsch, H. Junk, K. Weiss, B. Busskamp |
„Erhöhung der Dauerfestigkeit bei Zylinderkurbelgehäusen aus GJL durch Festigkeitsstrahlen“ |
VDI-Berichte |
2189 |
2013 |
|
153-170 |
VDI-Verglag Düsseldorf 2013 | ISBN: 978-3-18-092189-1 |
published |
|
F. Mücklich |
S. Hartmann, J. Ohser, G. Schneider, G. Petzow |
„Stereological Characterization of Sintered Microstructures with Different Grain Shapes“ |
Proc. Euromat ‘95, Assoz. Ital. di Metallurgia, Milano |
3 |
1995 |
|
217 - 226 |
|
published |
|
F. Mücklich |
S. Beinstingel, W. Arnold |
„Investigation of Vibration Induced Particle Segregation for the Processing of FGM“ |
Proceedings Functionally Graded Materials 1998, W. Kaysser (Ed.), Trans Tech Publications Inc, Enfield, USA |
|
1999 |
|
25 - 31 |
|
published |
|
N. Jeanvoine |
R. Jonsson, F. Mücklich |
„Investigation of the Arc and Glow Phase Fractions of Ignition Discharges in Air and Nitrogen for Ag, Pt, Cu and Ni Electrodes“ |
Proceedings of the 28th International Conference on Phenomena in Ionized Gases |
|
2007 |
|
284-287 |
Paper Nr. 1P03-04; ISBN: 978-80-87026-01-4 |
published |
|
S. Slawik |
P. Leibenguth, H. Welsch, H. Junk. K. Weiss, B. Busskamp, F. Mücklich |
„Erhöhung der Dauerfestigkeit bei Zylinderkurbelgehäusen aus GJL durch Festigkeitsstrahlen“ |
Österreichische Gießereirundschau |
60 |
2013 |
|
348-355 |
PDF verfügbar |
published |
|
S. Slawik |
P. Leibenguth, H. Welsch, H. Jung, K. Weiss, B. Busskamp, F. Mücklich |
„Erhöhung der Dauerfestigkeit bei Zylinderkurbelgehäusen aus GJL durch Festigkeitsstrahlen“ |
Giesserei |
|
2014 |
11 |
48 - 57 |
|
published |
|
S. Slawik |
P. Leibenguth, D. Rathmann, C. Gachot, F. Mücklich |
„Microstructural analysis of shot and laser shock peened grey iron for increased fatigue strength“ |
International Conference on Shot Peening (ICSP 12) |
|
2014 |
|
232 - 235 |
|
published |
|
M. Hans |
P. Faure, F. Mücklich |
„Maßgeschneiderte Oberflächenfunktionalisierung durch Laser-Interferenz-Metallurgie“ |
Metall |
64 |
2010 |
11 |
419 |
|
published |
|
F. Mücklich |
O. Öttel, H. Öttel, V. Klemm, M.Koch |
„Metallographische Strukturcharakterisierung von versetzungsarmem Galliumarsenid“ |
Special Issue of Practical Metallography (in German) |
22 |
1991 |
|
107 - 116 |
|
published |
|
F. Soldera |
N. Jeanvoine, K. Trinh, F. Mücklich |
„Investigation of the Structure of Plasma Erosion Craters using a SEM/FIB Dual Beam Workstation“ |
Proceedings of the Fourth Meeting of the European School of Materials Science and Engineering |
|
2007 |
|
163-172 |
Ed: M. Anglada; ISBN-10: 84-96616-20-7; Ed. CPDA-ETSEIB, Barcelona |
published |
|
C. Selzner |
N. Jeanvoine, A. Velichko, F. Mücklich |
„Untersuchung des Erosionsverhaltens von silberbasierten Kontaktwerkstoffen mittels FIB-Techniken“ |
Tagungsband zum 11. Werkstofftechnischen Kolloquium |
|
2008 |
|
257-262 |
DOI: 10.1002/mawe.200800401, ISBN:978-3-00-025648-6 | PDF verfügbar |
published |
|
F. Soldera |
N. Jeanvoine, A. Faundez, F. Mücklich |
„Study of Plasma Erosion on Surfaces and Microstructures“ |
Proceedings of the 16th International Plansee Seminar 2005, G. Kneringer et al. (Eds.), Reutte, Austria |
1 |
2005 |
|
250 - 264 |
PDF verfügbar |
published |
|
N. Manent Conesa |
N. Ilic, H. Natter, F. Soldera, F. Mücklich |
„Metallographic Characterisation of the Oxidation Protective Layer in RuAl Based Intermetallics”“ |
Special Issue of Practical Metallography |
32 |
2001 |
|
155 - 158 |
PDF verfügbar |
published |
|
F. Mücklich |
N. Ilic, H. A. Gobran, K. W. Liu |
„Microstructure and Properties of RuAl Based Materials Processed by Melting, Mechanical Alloying and Reaction Sintering“ |
Proceedings EUROMAT 2001, Rimini,Symposium Intermetallics |
|
2001 |
|
|
ISBN 88-85298-39-7 |
published |
|
I. El Azhari |
M. Zamanzade, J. Garcia, F. Soldera, Ch. Motz, F. Mücklich |
„Investigations of micro- mechanical properties of Ti(C,N) and Zr(C,N) coatings.“ |
Proceedings 19ThPlansee Seminar, Reutte, Austria |
|
2017 |
|
|
|
published |
|
J. Fiscina |
M. T. Malachevsky, F. Soldera, J. A. V. Hohl, D. A. Esparza |
„Influence of Bismuth on Cordierite polymorphism“ |
Proc. SPIE 4064, Third International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering, 323 (January 25, 2000) |
|
2000 |
|
|
DOI: 10.1117/12.375448 | PDF verfügbar |
published |
|
F. Soldera |
M. Sierra Rota, N. Ilic, F. Mücklich |
„Quantifizierung von lokalem Materialabtrag“ |
Special Issue of Practical Metallography (in German) |
31 |
2000 |
|
483 - 487 |
PDF verfügbar |
published |
|
A. Koblischka-Veneva |
M. R. Koblischka, Y. Zhou, S. Murphy, F. Mücklich, U. Hartmann, I. V. Shvets |
„Electron Backscatter Diffraction Analysis Applied to (001) Magnetite Thin Films Grown on MgO Substrates“ |
Proceedings of the International Workshop on Nanomagnets by Self-organization, Eisenerz, Austria |
|
2006 |
|
48- |
October 8-11, 2006 |
published |
|
F. Mücklich |
M. Lorinser, S. Hartmann, S. Beinstingel, J. Linke, M. Rödig |
„Be-Cu Gradient Materials through Controlled Segregation - Basic Investigations“ |
Proceedings of the third IEA international workshop on Beryllium Technology for Fusion, October 22-24, 1997, Mito city, Japan, H. Kawamura, M. Okamoto (Eds.), Japan Atomic Energy Research Institute |
|
1998 |
|
102 - 106 |
|
published |
|
G. Petzow |
M. J. Hoffmann, F. Mücklich |
„Mechanisch und thermisch hochbelastbare Keramikwerkstoffe“ |
Tagungsband Symposium Materialforschung - Neue Werkstoffe, Würzburg, BMFT |
|
1994 |
|
772 - 790 |
ISBN 3-88135-286-4 |
published |
|
N. Ilic |
M. Göken, M. Kempf, K. Durst, F. Soldera, F. Mücklich |
„Atomic Force Microscopy Study of Ru-Al Eutectic“ |
Special Issue of Practical Metallography |
32 |
2001 |
|
103 - 106 |
PDF verfügbar |
published |
|
A. Velichko |
M. Engstler, P. Leibenguth, F. Mücklich |
„FIB-Tomografie für die 3D-Charakterisierung von komplexen Mikrostrukturen am Beispiel der quantitativen Untersuchungen von Graphitkeimbildung und Wachstumsmorphologie“ |
Proceedings Industrielle Computertomografie Tagung |
|
2008 |
|
81-87 |
Shaker Verlag, Aachen, ISBN 978-3-8322-6949-4 |
published |
|
J. Barrirero |
M. Engstler, H. Aboulfadl, F. Mücklich |
„Atom probe tomography analysis of AlSi hypoeutectic alloy after Sr modification“ |
Extended Abstracts of the 3D Microstructure Meeting, 2-4 November 2011 Saarbrücken, Germany |
|
|
|
80-81 |
ISBN 978-3-88355-288-7 | PDF verfügbar |
published |
|
J. Barrirero |
M. Engstler, F. Mücklich |
„Atom probe analysis of Sr distribution in AlSi foundry alloys“ |
TMS Light Metals, at the TMS 2013 Annual Meeting and Exhibition |
|
2013 |
|
291-296 |
|
published |
|
A. Velichko |
M. Engstler, C. Selzner, F. Mücklich |
„3D Quantitative Characterization of Local Structure and Properties of Contact Materials“ |
Materials Research Society Symposium Proceedings |
1184 |
2009 |
|
145-150 |
PDF verfügbar |
published |
|
F. Mücklich |
M. Engstler |
„Gefüge-Tomographie in der Mikro, Nano- und atomaren Skala“ |
Proceedings Industrielle Computertomografie Tagung |
|
2010 |
|
15-20 |
ISBN 978-3-8322-9418-2 | PDF verfügbar |
published |
|
F. Mücklich |
M. Engstler |
„Ganz tief drinnen - Neue tomographische Methoden ermöglichen einen Einblick in die innere Materialstruktur“ |
Automobil Konstruktion |
4 |
2011 |
|
28-29 |
PDF verfügbar |
published |
|
D. Jankovic-Ilic |
L. Granberg, F. Mücklich |
„Microstructural Characterization of Cu-W Functionally Graded Materials“ |
Special Issue of Practical Metallography |
32 |
2001 |
|
275 - 278 |
|
published |
|
A. Velichko |
K. Schladitz, C. Holzapfel, F. Mücklich |
„3D-Charakterisierung der Graphitmorphologie mit Hilfe der FIB-Nanotomographie“ |
Special Issue of Practical Metallography (in German) |
38 |
2006 |
|
169-176 |
|
published |
|
A. Wiswesser |
K. Eichhorn, F. Mücklich, H. Öttel, S. Schläfer |
„Influence of Point Defects in GaAs on Harmonic Bragg-Intensities“ |
HASYLAB Jahresbericht |
|
1993 |
|
|
|
published |
|
F. Mücklich |
J. Ohser, G. Schneider |
„Korngröße in 2D oder 3D“ |
Special Issue of Practical Metallography (in German) |
27 |
1996 |
|
179 - 182 |
|
published |
|
W. H. Warnes |
J. J. Kruzic, C. C. Pratt, C. Stehr, D. P. Cann, B. J. Gibbons, I. Gallino, F. Soldera, R. Busch, L. Wallström |
„Improving Participation of Engineering Students Studying Abroad: An International Dual-Degree Program in Materials Science and Mechanical Engineering“ |
Journal of Metals |
|
2013 |
|
1-6 |
DOI: 10.1007/s11837-013-0637-9 |
published |
|
F. Mücklich |
J. Hoffmann, H. Schubert, K. G. Nickel |
„Struktur- und Gefügeanalyse keramischer Werkstoffe - Notwendigkeit, Anforderungen, Aussagekraft“ |
Neue Hütte |
4 |
1992 |
|
145 - 153 |
|
published |
|
Y. Wang |
J. Ghanbaja, P. Boulet, D. Horwat, F. Soldera, F. Mücklich, J.F. Pierson |
„Electrical and optical properties of binary copper oxide thin films“ |
International Symposium on Transparent Conductive Materials |
|
2014 |
|
|
Abstract for a speech at the International Symposium on Transparent Conductive Materials |
published |
|
Y. Wang |
J. Ghanbaja, F. Soldera, A. MeÌzin, D. Horwat, F. Mücklich, J.F. Pierson |
„Growth and characterization of reactively sputtered NiO thin films“ |
International Symposium on Transparent Conductive Materials |
|
2014 |
|
|
Abstract for a poster at the International Symposium on Transparent Conductive Materials |
published |
|
J. Rager |
J. Böhm, T. Kaiser, A. Flaig, F. Mücklich |
„Design and Materials for Long-Life Spark Plugs“ |
Proceedings of the SAE World Congress 2006 Detroit, New SI Engine and Component Design |
|
2006 |
|
Paper-No. 2006-01-06 |
|
published |
|
F. A. Lasagni |
I. Huertas-Olivares, A. F. Lasagni, F. Soldera, F. Mücklich |
„3D Nano-Characterization of Materials by FIB-Tomography“ |
Proceedings, AES- ATEMA’ 2008 Second International Conference, Cesena, Italy, |
|
2008 |
|
103-106 |
PDF verfügbar |
published |
|
F. A. Lasagni |
I. Huertas-Olivares, A. F. Lasagni, F. Soldera, F. Mücklich |
„3D Nano-Characterization of Materials by FIB-Tomography“ |
Proceedings, AES- ATEMA’ 2008 Second International Conference, Cesena, Italy, September 01 - 05, 2008 |
|
2008 |
|
103- 106 |
|
published |
|
A. Velichko |
I. Altpeter, U. Maisl, G. Walle, U. Netzelmann, H. Junk, R. Heinemann, F. Mücklich |
„Physikalische Eigenschaften des Gusseisens mit unterschiedlichen Graphitmorphologien““ |
Special Issue of Practical Metallography (in German) |
37 |
2005 |
|
189 -194 |
|
published |
|
F. Mücklich |
H. Öttel, K. Eichhorn |
„Influences of Point Defects in GaAs on Harmonic Bragg Intensities“ |
HASYLAB Jahresbericht |
|
1992 |
|
375 - 376 |
|
published |
|
F. Mücklich |
H. Öttel |
„Präzisionsgitterkonstantenmessungen zu Stöchiometrieuntersuchungen an GaAs-Pulvern“ |
Applikation Opt. Analysenmeßgeräte FPM |
|
1987 |
|
|
(Mai) |
published |
|
U. Scholz |
H. Yao, F. Mücklich, G. Petzow |
„Analyse der Versetzungsanordnung in einkristallinem Beryllium“ |
Special Issue of Practical Metallography (in German) |
26 |
1995 |
|
213 - 225 |
|
published |
|
K. Roberts |
G. Weikum, F. Mücklich |
„Untersuchungen zur automatischen Klassifikation von Lamellengraphit mit Hilfe des Stützvektorverfahrens“ |
Special Issue of Practical Metallography (in German) |
35 |
2003 |
|
117 - 126 |
ISBN: 3-88355-322-0 |
published |
|
S. Hartmann |
G. Schneider, F. Mücklich, G. Petzow |
„Quantitative Charakterisierung der Porenanordnung in Sintermetallen“ |
Special Issue of Practical Metallography (in German) |
26 |
1995 |
|
127 - 142 |
|
published |
|
C. Daniel |
F. Yu, F. Mücklich, T. Recktenwald, U. Bakowsky |
„Periodische Mikro-/Nano – Strukturierung von polymeren Oberflächen mittels interferierender Laserstrahlen“ |
EFDS-Tagungsband, 4. Wörlitzer-Workshop „Funktionelle Schichten“ |
|
2003 |
|
33 - 40 |
|
published |
|
G. Burdiles |
F. Soldera, H. Seidel, U. Schmid, F. Mücklich |
„Study of Electro Discharge Erosion on Crystalline Silicon“ |
Proceedings of the Jornadas SAM/CONAMET 2005, Mar del Plata, Argentina |
|
2005 |
|
|
ISBN 987-22443-0-8 (erschienen auf CD-ROM) | PDF verfügbar |
published |
|
H. A. Gobran |
F. Soldera, F. Mücklich |
„RuAl - An Intermetallic Material with Exceptional Properties“ |
Proceedings of the 16th International Plansee Seminar 2005, G. Kneringer et al. (Eds.), Reutte, Austria |
3 |
2005 |
|
51 |
PDF verfügbar |
published |
|
N. Jeanvoine |
F. Soldera, C. Holzapfel, F. Mücklich |
„Interaction of high voltage ignition discharces with electrodes: characterization and modelling“ |
Proceedings of the 24th International Conference on Electrical Contacts |
|
2008 |
|
450-455 |
June 9-12, 2008, Saint-Malo, France | PDF verfügbar |
published |
|
F. Mücklich |
F. Soldera |
„Lokale Oberflächen Modifikation und Schädigung durch Plasmaeinwirkung“ |
14. Sitzung des Arbeitskreises Quantitative Bruchanalyse, Karlsruhe 2000 |
|
2000 |
|
|
PDF verfügbar |
published |
|
A. Velichko |
F. Mücklich, U. Sonntag |
„Bildanalytische Identifizierung und Klassifizierung der Graphitmorphologie in Gusseisen“ |
Special Issue of Practical Metallography (in German) |
36 |
2004 |
|
465 - 470 |
|
published |
|
K. Roberts |
F. Mücklich, R. Schenkel, G. Weikum |
„An Information System for Material Microstructures“ |
SSDBM 2004, IEEE (2004) |
|
2004 |
|
329 - 332 |
|
published |
|
D. Katrakova |
F. Mücklich, M. J. Damgaard |
„Specimen Preparation and Electron Backscatter Diffraction“ |
Special Issue of Practical Metallography |
32 |
2001 |
|
355 - 358 |
|
published |
|
S. Hartmann |
F. Mücklich, J. Ohser, W. Dreßler, G. Petzow |
„Quantitative Charakterisierung von räumlichen Parametern des Siliziumnitridgefüges“ |
Special Issue of Practical Metallography (in German) |
24 |
1993 |
|
263 - 274 |
|
published |
|
Y. Hao |
F. Mücklich, J. Ohser, G. Petzow |
„Quantitative Characterization of the Dislocation Arrangement in Single Crystals“ |
Special Issue of Practical Metallography (in German) |
27 |
1995 |
|
175 - 178 |
|
published |
|
C. Daniel |
F. Mücklich, J. Müller, P. Rehbein, V. Haas |
„Charakterisierung periodischer Mikro-/Nano-Strukturierung zur Verschleißminimierung elektrischer Kontakte“ |
Special Issue of Practical Metallography (in German) |
34 |
2003 |
|
323 - 330 |
ISBN: 3-88355-313-1 |
published |
|
K. W. Liu |
F. Mücklich, R. Birringer |
„Hall-Petch Relationship in Nano-RuAl Prepared by Mechanical Alloying“ |
Materials Research Society (MRS) Symposium Proceedings |
676 |
2001 |
|
Y3.21.1 |
|
published |
|
A. Lasagni |
F. Mücklich |
„Laser Interference Metallurgy - New Surface Properties through Advanced Microstructure Design“ |
Proceedings of the Junior Scientist Conference, Vienna, Austria |
|
2006 |
|
151-152 |
ISBN 3-902463-05-8 |
published |
|
A. Lasagni |
F. Mücklich |
„Structuring of Thin Metallic Films by Means of Interfering Laser Beams“ |
Proceedings of the Jornadas SAM/CONAMET/MEMAT 2005, Mar del Plata, Argentina |
|
2005 |
|
|
ISBN: 987-22443-0-8 |
published |
|
H. A. Gobran |
F. Mücklich |
„Synthesis of Single Phase RuAl Intermetallic Compound by Reactive Sintering“ |
Proceedings of VIII. International Symposium on Self-Propagating High-Temperature Synthesis, Cagliari, Italy |
|
2005 |
|
56 |
(21. - 24. Juni) |
published |
|
F. Soldera |
F. Mücklich |
„On the Erosion of Material Surfaces Caused by Electrical Plasma Discharging“ |
Materials Research Society (MRS) Symposium Proceedings |
843 |
2005 |
|
T 5.4 |
PDF verfügbar |
published |
|
C. Daniel |
F. Mücklich |
„Laser Induced Hierarchical Nano-Composites in Metallic Multi-Films: Structural Characterization“ |
Materials Research Society (MRS) Symposium Proceedings |
843 |
2005 |
|
T 5.8 |
|
published |
|
A. Lasagni |
F. Mücklich |
„Periodical 3-Beams Interference Micro-Structuring of Multilayer Metallic Thin Films“ |
WDS ´04 Proceedings of Contributed Papers: Part III – Physics f-3, J. Safrankova (Ed.), (2004), Prag, Matfyzpress |
|
2004 |
|
480 - 485 |
|
published |
|
N. Jeanvoine |
F. Mücklich |
„Electrode Erosion Behaviour of Silver-Nickel Multiphase Materials“ |
WDS ´04 Proceedings of Contributed Papers: Part III – Physics f-3, J. Safrankova (Ed.), (2004), Prag, Matfyzpress |
|
2004 |
|
486 - 491 |
ISBN 80-86732-32-0 |
published |
|
C. Daniel |
F. Mücklich |
„Transmission electron microscopy study on laser interference irradiated Ni/Al multi-films“ |
M.Geiger, K.-D. Bouzakis, B. Denkena, H.-K. Toenshoff, Fr.-W. Bach, U. Popp (Eds.), Proceedings of the 4th International Conference THE Coatings (2004), Meisenbach, Bambach |
|
2004 |
|
287 - 296 |
ISBN: 3-87525-201-2 |
published |
|
C. Daniel |
F. Mücklich |
„Periodische Nano-Härteentwicklung eines Ni/Al-Multifilms mittels interferierender Laserstrahlen“ |
Verbundwerkstoffe, H. P. Degischer (Ed.), Wiley-VCH, Weinheim |
|
2003 |
|
195 - 200 |
ISBN 3-527-30762-1 |
published |
|
K. W. Liu |
F. Mücklich |
„Synthesis and Thermal Stability of Nano-RuAl by Mechanical Alloying“ |
Proceedings Materials Week, München |
|
2001 |
9 |
989 - 996 |
DGM-Verlagsgesellschaft |
published |
|
G. Petzow |
F. Mücklich |
„Microstructure - Fascinating Variety in Stringent Rules“ |
Practical Metallography |
33 |
1996 |
2 |
64 - 82 |
|
published |
|
G. Petzow |
F. Mücklich |
„Gefüge - Faszinierende Vielfalt in strengen Regeln“ |
Special Issue of Practical Metallography (in German) |
26 |
1995 |
|
29 - 47 |
|
published |
|
W. Bührer |
F. Mücklich |
„Beryllium Single Crystal Tests, Mosaic and Reflectivity“ |
Progress Report LNS-167, ETH Zürich and Paul Scherrer Institute, Villingen |
|
1993 |
51 |
|
|
published |
|
A. Velichko |
F. Mücklich |
„Neue Möglichkeiten der objektiven Graphitklassifizierung in Gusseisen durch Nano-Tomographie und internetbasierte Online-Verfahren“ |
VDI-Berichte Giesstechnik im Motorenbau |
1949 |
2007 |
|
21-36 |
|
published |
|
A. Velichko |
F. Mücklich |
„3D-Gefügeanalyse -- und was lernen wir eigentlich daraus?“ |
Special Issue of Practical Metallography (in German) |
39 |
2007 |
|
3-12 |
|
published |
|
A. Velichko |
F. Mücklich |
„3D-Analysis of Complex Microstructures. Quantification and Classification by FIB/SEM-Nanotomography“ |
G.I.T. Imaging & Microscopy |
3 |
2007 |
|
40-42 |
|
published |
|
A. Velichko |
F. Mücklich |
„3D-Analysis of Complex Microstructures. Quantification and Classification by FIB/SEM-Nanotomography“ |
G.I.T. Laboratory Journal |
9-10 |
2007 |
|
48-50 |
|
published |
|
C. Selzner |
F. Mücklich |
„Arc Erosion Behavior and Microstructure Investigations of Silver-based Contact Materials“ |
Proceedings of the 24th international conference on electrical contacts |
|
2008 |
|
55-60 |
ICEC Saint Malo |
published |
|
M. Engstler |
F. Mücklich |
„FIB Tomography and Image Analysis for quantitative Characterization of Microstructures“ |
Proceeding of the Microscopy Conference, Graz, Austria |
|
2009 |
|
75-76 |
ISBN 978-3-85125-062-6 | PDF verfügbar |
published |
|
K. E. Trinh |
F. Mücklich, E. Ramos-Moore |
„The role of microstructure and surface topography in the electrical behavior of Sn-coated Cu contacts“ |
27th International Conference on Electrical Contacts |
|
2014 |
|
|
|
published |
|
K. E. Trinh |
F. Mücklich, M. Leidner, H. Schmidt |
„Einfluss von Laser-Oberflächentexturierung auf die Mikrostruktur und das elektrische Verhalten zinnbeschichteter Steckverbinderwerkstoffe“ |
5. Symposium Connectors |
|
2015 |
|
|
|
published |
|
K. E. Trinh |
F. Mücklich |
„Minimierung des elektrischen Kontaktwiderstand verzinnter Kupfer-Kontakte mittels Laserinterferenzstrukturierung“ |
Metall |
69 |
2015 |
|
451-454 |
|
published |
|
K.E. Trinh |
F. Mücklich |
„Laserinterferenzstrukturierung als Werkzeug zur Optimierung elektrischer Steckverbinder“ |
Kontakverhalten und Schalten |
|
2015 |
|
32-38 |
|
published |
|
C. J. R. González Oliver |
F. C. Lovey, A. Caneiro, D. O. Russo, D. S. Rodríguez, F. Soldera, J. Fiscina, J. Ma. Rincón |
„“ |
Crystallization 2009 – 9th International Symposium on Crystallization in Glasses and Liquids, 10th – 13th September 2009, Foz do Iguacu, Brazil |
|
2009 |
|
|
|
published |
|
Mücklich, F. |
Engstler, M., Britz, D., Barrirero, J., Rossi, P. |
„Warum wir alle Dimensionen brauchen - über die Lösung recht alter und sehr neuer Werkstofffragen auf der mikro- nano- und atomaren Skala“ |
Sonderbände der Praktischen Metallographie |
47 |
2015 |
|
29-38 |
|
published |
|
F. Mücklich |
D. Katrakova |
„Zur Gefüge-Kontrastierung mit der orientierungsabbildenden Mikroskopie“ |
Special Issue of Practical Metallography (in German) |
29 |
1998 |
|
297 - 303 |
|
published |
|
D. Bruch |
D. Henes, P. Leibenguth, C. Holzapfel |
„Investigations on Microstructure, Mechanical Properties and Corrosion Resistance of Large Thickness Duplex Stainless Steel Forgings“ |
Proceedings Stainless Steel World 2007 |
|
2007 |
|
Paper-No.7022 |
published on CD; 7-9 November, Maastricht Holland |
published |
|
A. Lasagni |
D. Acevedo, M. Cornejo, F. Lasagni, M. Politano, C. Barbero, F. Mücklich |
„Direct Fabrication of Surface Architectures on Polymers and Copolymers Using Laser Interference Patterning“ |
Proceedings of EMT09 - SPIE Europe Microtechnologies for the New Millennium |
17 |
2009 |
|
7365 |
DOI: 10.1117/12.821090 |
published |
|
A. Lasagni |
D. Acevedo, C. Barbero, F. Mücklich |
„Fabrication of Conductive Polymeric Arrays using Direct Laser Interference Micro/nano Patterning“ |
Materials Research Society Symposium Proceedings |
1030 |
2008 |
|
|
1030-G06-01 |
published |
|
S. Fang |
C.J. Hsu, S. Klein, L. Llanes, D. Bähre, F. Mücklich |
„Machining influence on cemented tungsten carbide (WC-CoNi) by ultrashort pulse laser“ |
6th World Tribology Congress (WTC 2017), Beijing, China, 17-22 September |
|
2017 |
|
|
|
published |
|
A. Velichko |
C. Selzner, N. Jeanvoine, F. Mücklich |
„Simulation lokaler Eigenschaften aus 3D – Tomographiedaten“ |
Special Issue of Practical Metallography (in German) |
40 |
2008 |
|
221-226 |
|
published |
|
A. Lasagni |
C. Holzapfel, F. Mücklich |
„Design and Calculation of Advanced Microstructural Patterns by Laser Interference Metallurgy“ |
Materials Research Society (MRS) Symposium Proceedings |
890-Y04 |
2006 |
|
02.1-6 |
|
published |
|
A. Lasagni |
C. Holzapfel, F. Mücklich |
„Laser Interference Metallurgy - New Surface Properties through Advanced Microstructure Design“ |
Proceedings of the 15 IFHTSE + 20 SMT, Vienna, Austria |
|
2006 |
|
289-294 |
ISBN 3-901-384-19-7 |
published |
|
F. Mücklich |
C. Gachot, R. Catrin, U. Schmid, A. Lasagni |
„Macroscopic 2D Design of Micro/Nano Grain Architectures by Laser Interference Metallurgy“ |
Materials Research Society Symposium Proceedings |
1059 |
2008 |
|
|
1059-KK04-06 |
published |
|
F. Mücklich |
C. Gachot |
„Laser-Interferenz-Metallurgie - Ein Bioinspiriertes Werkzeug zur Erzeugung neuer Hochleistungsoberflächen“ |
Empowering Nano |
|
2008 |
3 |
20-22 |
|
published |
|
F. Mücklich |
C. Daniel, A. Lasagni, F. Yu |
„Direct Surface Patterning induced by Interfering Laser Beams“ |
Materials Research Society (MRS) Symposium Proceedings |
EXS-2 |
2004 |
|
M 11.1 |
|
published |
|
F. Mücklich |
C. Daniel |
„Quantifizierung periodischer Oberflächentopographien mittels Weißlichtinterferometrie“ |
Special Issue of Practical Metallography (in German) |
35 |
2004 |
|
405 - 410 |
|
published |
|
F. Mücklich |
C. Daniel |
„Information und Kommunikation in ´Materialographie´“ |
GIT Labor-Fachzeitschrift |
9 |
2003 |
|
952 - 955 |
|
published |
|
F. Mücklich |
C. Daniel |
„Information and Communication in ´Materialography´“ |
GIT(Wiley) Imaging & Microscopy |
5 |
2003 |
3 |
27 - 28 |
|
published |
|
F. Soldera |
C. A. García Tourn, J. Fiscina, R. Kohl, J. A. V. Hohl |
„Diamante Obtenido Sintéticamente Por CVD: Chemical Vapour Deposition“ |
Proceedings of the Iberomat V, Jornadas SAM ´98. 14 – 18 September 1998, Rosario , Provinz Santa Fe |
|
1998 |
|
|
PDF verfügbar |
published |
|
Engstler, M. |
Barrirero, J., Mücklich, F. |
„Skalenübergreifende Mikroskopie an Sr-veredelten AlSi Gusslegierungen“ |
Sonderbände der Praktischen Metallographie |
47 |
|
|
77-82 |
|
published |
|
F. Soldera |
B. Heiland, N. Ilic, N. Manent Conesa, F. Mücklich |
„Investigation of Crater Formation and Microstructural Modification Using Focused Ion Beam Microscopy“ |
Special Issue of Practical Metallography |
32 |
2001 |
|
69 - 72 |
PDF verfügbar |
published |
|
F. Mücklich |
A. Velichko, N. Jeanvoine, C. Selzner |
„Nanotomography for Electrical Contacts -- New Insights by High Resolution 3D Analysis of Local Material Degradation“ |
Proceedings of the 24th International Conference on Electrical Contacts |
|
2008 |
|
31-36 |
ICEC Saint-Malo |
published |
|
M. Engstler |
A. Velichko, F. Mücklich |
„Automatisierte FIB-EDX-Gefügetomografie“ |
Special Issue of Practical Metallography (in German) |
40 |
2008 |
|
281-286 |
PDF verfügbar |
published |
|
N. Jeanvoine |
A. Velichko, C. Selzner, F. Mücklich |
„Nanotomographie an Entladungskratern - Neue Möglichkeiten hochauflösender 3D-Analyse der lokalen Werkstoffschädigung“ |
VDE-Fachbericht, Kontaktverhalten und Schalten |
|
2007 |
|
195-201 |
19. Albert-Keil-Kontaktseminar und Fachtagung, Universität Karlsruhe, 26. bis 28. September 2007; eingeladener Vortrag |
published |
|
H. Öttel |
A. Müller, R. Wiedemann, F. Mücklich |
„Metallographische Schrägschliffuntersuchungen beschichteter Werkstoffe“ |
Special Issue of Practical Metallography (in German) |
22 |
1991 |
|
237 - 248 |
|
published |
|
C. Holzapfel |
A. Lasagni, G. Seiler, F. Mücklich |
„Exploring Thin Films by Using STEM Techniques in a Dual Beam Workstation“ |
Microscopy and Microanalysis |
12-SuppS02 |
2006 |
|
1292-1293 |
doi: 10.1017/S1431927606064713 |
published |
|
I. Barrientos Cabrera |
A. Lasagni, F. Soldera, J. A. V. Hohl, F. Mücklich |
„Influence of the Oxide Layer in the Erosion of Metals Caused by Electrical Plasma Discharging“ |
Jornadas SAM – Conamet – Simposio Materia Proceedings 08 - 17 (2003), Bariloche, Argentiniern |
|
2003 |
|
738 - 741 |
PDF verfügbar |
published |
|
C. Daniel |
A. Lasagni, F. Mücklich |
„Microstructure - Mechanical Properties Relationship of Laser Interference Irradiated Ni/Al Multi-Film“ |
Materials Research Society (MRS) Symposium Proceedings |
795 |
2004 |
|
U 10.4 |
|
published |
|
F. Lasagni |
A. Lasagni, C. Holzapfel, F. Mücklich, H. P. Degischer |
„Análisis 3D del Si Eutéctico en Aleaciones de Aluminio-Silicio y Materiales Compuestos“ |
Proceedings of 9no Congreso Nacional de Materiales, Vigo, España |
|
2006 |
|
555-558 |
ISBN 84-8158-325-1 |
published |
|
F. Lasagni |
A. Lasagni, C. Holzapfel, F. Mücklich, H. P. Degischer |
„Three Dimensional Study of Si-Eutectic Structures in Un-reinforced and Short Fibre Reinforced Al-Alloys“ |
Special Issue of Practical Metallography (in German) |
38 |
2006 |
|
177-183 |
|
published |
|
F. Mücklich |
A. Lasagni, C. Daniel |
„Enhanced Friction and Wear Behaviour of Electrical Contacts Via Bio Inspired Microstructure Control Produced by Laser Interference Metallurgy“ |
Proceedings of the 23rd International Conference on Electrical Contacts ICEC2006, Sendai, Japan |
|
2006 |
|
220-225 |
ISBN 4-88552-217-X-C3055 |
published |
|
F. Mücklich |
A. Lasagni, C. Daniel |
„Micro/Nanostructuring with Laser Interference Metallurgy“ |
Proceedings of the 16th Int. Plansee Seminar 2005, G. Kneringer, P. Rödhammer,
H. Wildner (Eds.)
|
2 |
2005 |
|
144 -158 |
|
published |
|
D. Acevedo |
A. Lasagni, C. Barbero, F. Mücklich |
„Estructuración Directa de Superficies Poliméricas Utilizando Interferencia Laser Pulsada“ |
Proceedings of the 26th Chemistry Argentinean Congress, San Luis, Argentina |
|
2006 |
|
|
ISBN 13978987-1031-45-0 (erschienen auf CD-ROM) |
published |
|
D. Acevedo |
A. Lasagni, C. Barbero, F. Mücklich |
„Micro/nano Fabrication of Surface Architectures on Polymers and Copolymers using Direct Laser Interference Patterning“ |
Materials Research Society Symposium Proceedings |
1054 |
2008 |
|
|
1054-FF01-07 |
published |
|
F. Mücklich |
A. Lasagni |
„Laser Interference Metallurgy - Using Interference as a Versatile Tool for Micro/Nano Structuring and Surface Functionalization“ |
Proceedings of the International Workshop Nanostructured Materials in Electroplating, Sandanski, Bulgaria |
|
2006 |
|
81-92 |
ISBN 10:954-07-2378-7 |
published |
|
F. Mücklich |
A. Lasagni |
„Art and Science of Micro-Patterning“ |
Revista SAM |
1 |
2005 |
|
1 - 17 |
ISSN 1668-4788 |
published |
|
F. Mücklich |
N. Jeanvoine, C. Holzapfel, F. Soldera |
„FIB-Tomography and 3D Reconstruction of Crater Formation due to Discharge Phenomena“ |
Proceedings of the 23rd International Conference on Electrical Contacts |
|
2006 |
|
405-410 |
ICEC 2006, Sendai, Japan, ISBN 4-88552-217-X-C3055 |
published |
|
F. Mücklich |
|
„The Grain Size-Shape Problem and the Regularity of Microstructures“ |
Proceedings Forum 2000, Academy of Ceramics, Piano di Sorrento, Italien |
|
2001 |
|
|
|
published |
|
F. Mücklich |
|
„Monochromator-Materialien auf der Basis von einkristallinem Beryllium“ |
dgkk-Mitteilungsblatt |
58 |
1993 |
|
12 - 13 |
|
published |
|