|
|
Titel |
|
Vol |
|
No. |
Seiten |
|
|
|
H. Shanak |
K.-H. Ehses, W. Götz, P. Leibenguth, R. Pelster |
„X-Ray Diffraction Investigations of α- Polyamide 6 Films: Orientation and Structural Changes upon Uni- and Biaxial Drawing“ |
Journal of Materials Science |
44 |
2009 |
2 |
655-663 |
DOI: 10.1007/s10853-008-3062-7 | PDF verfügbar |
published |
|
Mücklich, F. |
Engstler, M., Britz, D., Barrirero, J., Rossi, P. |
„Why We Need All Dimensions to Solve Both Very Old and Very New Questions in Materials at the Micro-, Nano- and Atomic Scales“ |
Practical Metallography |
52 |
2015 |
9 |
507-524 |
doi: 10.3139/147.110360 |
published |
|
B. Raillard |
J. Rémond, E. Ramos-Moore, N. Souza, C. Gachot, F. Mücklich |
„Wetting Properties of Steel Surfaces Modified by Laser Interference Metallurgy“ |
Advanced Engineering Materials |
15 |
2013 |
5 |
341-346 |
DOI: 10.1002/adem.201200247 | PDF verfügbar |
published |
|
K.E. Trinh |
A. Tsipenyuk, M. Varenberg, A. Rosenkranz, N. Souza, F. Mücklich |
„Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting“ |
Wear |
344-345 |
2015 |
|
86-98 |
doi:10.1016/j.wear.2015.10.010 |
published |
|
A. Rosenkranz |
S.A. Khan, C. Gachot, F. Mücklich |
„Wear behavior of micro-coined steel surfaces under mixed lubrication“ |
Industrial Lubrication and Tribology |
|
2016 |
|
|
Accepted in Industrial Lubrication and Tribology |
accepted |
|
A. Rosenkranz |
S. Jaeger, C. Gachot, S. Vogel, F. Mücklich |
„Wear behavior of laser-patterned piston rings in squeeze film dampers“ |
Advanced Engineering Materials |
17 |
2015 |
8 |
1208-1214 |
DOI: 10.1002/adem.201400481 |
published |
|
J. Fiscina |
M. Ohligschläger, F. Mücklich |
„W-Cu Graded Alloys Produced by Size Segregation of Agglomerates Induced by Vertical Vibration at High Frequencies“ |
Journal of Materials Science Letters |
22 |
2003 |
|
1455-1457 |
|
published |
|
S. P. Harimkar |
C. Daniel, C. Holzapfel, P. Leibenguth, F. Mücklich, N. B. Dahotre |
„Validation of Crystallographic Correlation for Faceted Morphology in Laser Surface Engineered Alumina Ceramic“ |
Scripta Materialia |
57 |
2007 |
|
401-404 |
|
published |
|
N. Souza |
F Lasserre, A Blickley, M Zeiger, S Suarez, M Duarte, V Presser, F Mücklich |
„Upcycling spent petroleum cracking catalyst: pulsed laser deposition of single-wall carbon nanotubes and silica nanowires“ |
RSC Advances |
6 |
2016 |
|
72596 - 72606 |
DOI: 10.1039/C6RA15479D |
published |
|
Y. Wang |
J. Ghanbaja, F. Soldera, S. Migot, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson |
„Tuning the structure and preferred orientation in reactively sputtered copper oxide thin films“ |
Applied Surface Science |
335 |
2015 |
|
85-91 |
DOI:10.1016/j.apsusc.2015.02.028 |
published |
|
K. Yalamanchili |
I.C. Schramm, E. Jiménez-Piqué, L. Rogström, F. Mücklich, M. Odén, N. Ghafoor |
„Tuning hardness and fracture resistance of ZrN/Zr0.63Al0.37N nanoscale multilayers by stress-induced transformation toughening“ |
Acta Materialia |
89 |
2015 |
|
22-31 |
DOI:10.1016/j.actamat.2015.01.066 |
published |
|
S. Fang, |
T. Herrmann, A. Rosenkranz, C. Gachot, F.G. Marro, F. Mücklich, L. Llanes, D. Bähre |
„Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts“ |
Procedia CIRP |
|
2016 |
|
439-443 |
|
published |
|
S. Fang |
T. Herrmannc, A. Rosenkranz, C. Gachot, F.G. Marro, F. Mücklich, L. Llanes, D. Bähre |
„Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts“ |
Procedia CIRP |
|
2016 |
|
439-443 |
DOI:10.1016/j.procir.2016.02.228 |
published |
|
L. Reinert |
I. Green, S. Gimmler, B. Lechthaler, F. Mücklich and S. Suarez |
„Tribological behavior of self-lubricating carbon nanoparticle reinforced metal matrix composites“ |
Wear |
408-409 |
2018 |
|
72-85 |
|
published |
|
T. Kaiser |
W. Sigle, D. Goll, N. H. Goo, V. Srot, P. A. van Aken, E. Detemple, W. Jäger |
„Transmission Electron Microscopy Study of the Intermixing of Fe--Pt Multilayers“ |
Journal of Applied Physics |
103 |
2008 |
6 |
063913-1-063913-6 |
DOI: 10.1063/1.2884347 |
published |
|
K. Trinh |
E. Ramos-Moore, I. Green, C. Pauly, M. Zamanzade, F. Mücklich |
„Topographical and Microstructural Effects of Laser Surface Texturing on Tin-coated Copper Electrical Connectors under Load Cycling“ |
IEEE Transactions on Components, Packaging and Manufacturing Technology |
|
2015 |
|
|
|
accepted |
|
F. Mücklich |
F. Miguel, F. Soldera |
„Tomography and 3D Analysis of Microstructures and Nanowire Arrays“ |
2011 MRS Fall Meeting & Exhibit, Symposium Z: Functional Metal-Oxide Nanostructures, Boston (USA) |
|
2011 |
|
|
|
published |
|
F. Lasagni |
A. Lasagni, E. Marks, C. Holzapfel, F. Mu¨cklich, H.P. Degischer |
„Three-dimensional characterization of ‘as-cast’ and solution-treated AlSi12(Sr) alloys by high-resolution FIB tomography“ |
Acta Materialia |
55 |
2007 |
|
3875-3882 |
DOI: 10.1016/j.actamat.2007.03.004 | PDF verfügbar |
published |
|
F. Lasagni |
A. Lasagni, C. Holzapfel, F. Mücklich, H. P. Degischer |
„Three Dinemsional Characterization of Unmodified and Sr-Modified Al-Si Eutectics by FIB and FIB EDX Tomography“ |
Advanced Engineering Materials |
8 |
2006 |
8 |
719-723 |
DOI: 10.1002/adem.200500276 | PDF verfügbar |
published |
|
S. Suarez |
F. Soldera, C. G. Oliver, D. Acevedo, F. Mücklich |
„Thermomechanical behavior of Bulk Ni/MWNT Composites Produced via Powder Metallurgy“ |
Advanced Engineering Materials |
7 |
2012 |
14 |
499-502 |
DOI: 10.1002/adem.201200100 | PDF verfügbar |
published |
|
D. S. Rodríguez |
P. A. Arboleda, D. O. Russo, F. Soldera, C. J. R. González-Oliver, J. M. Rincón |
„Thermal behaviour of iron aluminium phosphate glasses containing UO2·67“ |
Glass Technology - European Journal of Glass Science and Technology Part A |
54 |
2013 |
3 |
111-118 |
|
published |
|
Y.H. Chen |
L. Rogström, J.J. Roa, J.Q. Zhu, I.C. Schramm, L.J.S. Johnson, N. sChell, F. Mücklich, M.J. Anglada, M. Odén |
„Thermal and mechanical stability of wurtzite-ZrAIN/cubic-TiN and wurzite-ZrAIN/cubic-ZrN multilayers“ |
Surface and Coatings Technology |
324 |
2017 |
255 |
|
|
published |
|
J. Kodolányi |
P. Hoppe, E. Gröner, C. Pauly, F. Mücklich |
„The Mg isotope composition of presolar silicate grains from red giant stars“ |
Geochimica et Cosmochimica Acta |
140 |
2014 |
|
577-605 |
DOI: 10.1016/j.gca.2014.05.053 |
published |
|
A. Torge |
P. Grützmacher, F. Mücklich, M. Schneider |
„The influence of mannitol on morphology and disintegration of spray-dried nano-embedded microparticles“ |
European Journal of Pharmaceutical Sciences |
104 |
2017 |
|
171 - 179 |
DOI: 10.1016/j.ejps.2017.04.003 |
published |
|
A. Rosenkranz |
C. Gachot, E. Ramos-Moore, F. Mücklich |
„The influence of laser-patterned surfaces on the frictional behavior under dry and lubricated sliding conditions“ |
Tribology Online |
|
2016 |
|
|
Accepted in Tribology Online 31.03.2016 |
accepted |
|
P.G. Grützmacher |
A. Rosenkranz, S. Rammacher, C. Gachot, F. Mücklich |
„The influence of centrifugal forces on friction and wear in rotational sliding“ |
Tribology International |
116 |
2017 |
|
256-263 |
DOI: 10.1016/tribol.2017.07.021 |
published |
|
A. I. Kovalev |
D. L. Wainstein, A. Y. Rashkovskiy, R. Gago, F. Soldera, J. L. Endrino |
„The confinement of phonon propagation in TiAIN/Ag multilayer coatings with anomalously low heat conductivity“ |
Applied Physics Letters |
108 |
2016 |
|
|
doi.org/10.1063/1.4953230 |
published |
|
B. Bax |
C. Pauly, P. Leibenguth, K. Woll, F. Mücklich |
„Synthesis of B2-RuAl coatings on mild steel by laser cladding“ |
Surface and Coatings Technology |
206 |
2012 |
19 |
3931-3937 |
DOI: 10.1016/j.surfcoat.2012.03.063. | PDF verfügbar |
published |
|
K. W. Liu |
F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig |
„Synthesis of Nanocrystalline B2 Structured (Ru,Ni)Al in the Ternary Ru-Al-Ni System by Mechanical Alloying and its Thermal Stability“ |
Materials Science and Engineering |
|
2001 |
|
187-197 |
|
published |
|
K. W. Liu |
F. Mücklich, W. Pitschke, R. Birringer, K. Wetzig |
„Synthesis of Nanocrystalline B2 Structured (Ru,Ir)Al in the Ternary Ru-Al-Ir System by Mechanical Alloying and its Thermal Stability“ |
Zeitschrift für Metallkunde |
92 |
2001 |
8 |
924-930 |
|
published |
|
M. Maril |
P. Tobosque, J. Nunez, C.A. Rodriguez, M.P. Delplancke, J. L. Delplancke, M. Yacaman, M.Josefina Arellano-Jimenez, F. Soldera, C. Carrasco |
„Synthesis and structural analysis of electrodeposited Pb-Co films for oxygen evolution applications“ |
Materials Characterization |
148 |
2019 |
|
323-329 |
DOI: 10.1016/j.matchar.2018.12.031 |
published |
|
A. Rosenkranz |
P. Grützmacher, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich |
„Synergetic effect of laster patterning and micro coining for controlled lubricant propagation“ |
Surface Topography: Metrology and Properties, Special Issue |
|
2016 |
|
|
|
submitted |
|
S. Fang |
L. Llanes, M. Engstler, D. Bähre, F. Soldera, F. Mücklich |
„Surface Topography Quantification of Super Hard Abrasive Tools by Laser Scanning Microscopy“ |
Materials Performance and Characterization |
5 |
2016 |
5 |
796-815 |
|
published |
|
S. Fang |
A. Rosenkranz, F.G. Marro, C. Gachot, L.Llanes, D. Bähre, F. Mücklich |
„Surface Modification of Cemented Tungsten Carbide (Wc-Co) by Ultra-Short Pulse Laser Processing and its Tribological Properties“ |
7th International Conference on Tribology in Manufacturing Processes |
|
2016 |
|
|
|
accepted |
|
A. Knutsson |
I.C. Schramm, k. Asp Grönhagen, F. Mücklich, M. Odén |
„Surface directed spinodal decomposition at TiAlN/TiN interfaces“ |
Journal of Applied Physics |
113 |
2013 |
|
|
DOI: 10.1063/1.4795155, Article Number 114305 |
published |
|
G. Mitov |
J. Gessner, U. Lohbauer, K. Woll, F. Mücklich, P. Pospiech |
„Subcritical Crack Growth Behavior and Life Data Analysis of Two Types of Dental Y-TZP Ceramics“ |
Dental Materials |
27 |
2011 |
7 |
684–691 |
DOI:10.1016/j.dental.2011.03.010 | PDF verfügbar |
published |
|
F. G. Marro |
R. Chintapalli, P. Hvizdos, F. Soldera, F. Mücklich, M. Anglada |
„Study of Near Surface Changes in Yttria-doped Tetragonal Zirconia after Low Temperature Degradation“ |
International Journal of Materials Research |
100 |
2009 |
1 |
92-96 |
PDF verfügbar |
published |
|
A.E. Giba |
P. Pigeat, S. Bruyere, H. Rinnert, F. Soldera, F. Mücklich, R. Gago, D. Horwat |
„Strong Room Temperature Blue Emission from Rapid Thermal Annealed Cerium-Doped Aluminium“ |
ACS Photonics |
4 |
2017 |
|
1945-1953 |
DOI: 10.1021/acsphotonics.7b00233 |
published |
|
C. Daniel |
A. Lasagni, F. Mücklich |
„Stress and Texture Evolution of Ni/Al Multi-Film by Laser Interference Irradiation“ |
Surface & Coatings Technology |
|
2004 |
|
478-482 |
|
published |
|
F. Mücklich |
J. Ohser, S. Blank, D. Katrakova, G. Petzow |
„Stereological Analysis of Grain Size and Grain Shape Applied to Silicon Nitride Ceramics“ |
Zeitschrift für Metallkunde |
90 |
1999 |
|
557-561 |
|
published |
|
K. Woll |
C. Holzapfel, H. A. Gobran, F. Mücklich |
„Single-Phase Interdiffusion in B2-RuAl Intermetallic Compound“ |
Scripta Materialia |
57 |
2007 |
1 |
1-4 |
|
published |
|
F. Lasserre |
A. Rosenkranz, N. Souza Carmona, M. Roble, E. Ramos-Moore, D.E. Diaz-Droguett |
„Simultaneous deposition of carbon nanotubes and decoration with gold-palladium nanoparticles by laser induced forward transfer“ |
Applied Physics A |
122 |
2016 |
|
p. 150 |
DOI: 10.1007/s00339-016-9682-x |
published |
|
D. Acevedo |
A. Lasagni, C. Barbero, F. Mücklich |
„Simple Fabrication Method of Conductive Polymeric Arrays using Direct Laser Interference Micro/Nano Patterning“ |
Advanced Materials |
19 |
2007 |
|
1272-1275 |
|
published |
|
D. Acevedo |
H. Salavagione, A. Lasagni, E. Morallón, F. Mücklich, C. Barbero |
„SERS Active Surface in Two Steps, Patterning and Metallization“ |
Advanced Engineering Materials |
15 |
2013 |
5 |
325-329 |
DOI: 10.1002/adem.201200240 | PDF verfügbar |
published |
|
D. Wibbing |
J. Binder, W. Schinköthe, C. Pauly, C. Gachot, F. Mücklich |
„Sensmili: Absolutes Wegmesssystem aus einer diffraktiven q-nären Pseudo-Zufalls-Sequenz“ |
Technisches Messen |
79 |
2012 |
|
44-51 |
PDF verfügbar |
published |
|
C. Petersen |
A. Lasagni, C. Holzapfel, C. Daniel, F. Mücklich, M. Veith |
„SEM/TEM Characterization of Periodical Novel Amorphous/Nanocrystalline Micro-composites Obtained by Laser Interference Structuring: The System HAlO-Al·Al2O3“ |
Applied Surface Science |
253 |
2007 |
|
8022-8027 |
|
published |
|
D. Jankovic-Ilic |
J. Fiscina, C.G. Oliver, N. Ilic, F. Mücklich |
„Self Formed Cu-W Finctionally Graded Material Produced via Powder Segregation“ |
Advanced Engineering Materials |
9 |
2007 |
7 |
542-546 |
|
published |
|
R. Catrin |
C. Gachot, G. Marchand, U. Schmid, F. Mücklich |
„Selective Wet Chemical Etching of Metallic Thin Films Designed by Laser Interference Metallurgy (LIMET)“ |
SPIE Proceedings |
7362 |
2009 |
|
736217-1-6 |
Conference proceeding: SPIE Europe Microtechnologies for the New Millennium (Dresden, 4-6 Mai 09) | DOI:10.1117/12.821333 | PDF verfügbar |
published |
|
M. A. Guitar |
A. Scheid, S. Suárez, D. Britz, M. Duarte Guigou, F. Mücklich |
„Secondary carbides in high chromium cst irons: an alternative approach to their morphological and spatial distribution characterization“ |
Materials Characterization |
144 |
2018 |
|
621-630 |
|
published |
|
N. Souza |
M. Roble, D. E. Diaz-Droguett, F. Mücklich |
„Scaling up single-wall carbon nanotube laser annealing: effect on electrical resistance and hydrogen adsorption“ |
RSC Advances |
7 |
2017 |
9 |
5084 - 5092 |
doi:10.1039/C6RA27794B |
published |
|
F. Lasagni |
A. Lasagni, C. Holzapfel, F. Mücklich |
„Sample Preparation of Al-alloys for 3D-FIB Nano-characterization“ |
Practical Metallography |
45 |
2008 |
5 |
246-250 |
|
published |
|
K. Woll |
A. Bergamaschi, K. Nordlung, K. Avchachov, D. Flyura, C. Wagner, F. Mücklich, C. Pauly |
„Ru/Al Multilayers Integrate Maximum Energy Density and Ductility for Reactive Materials“ |
Scientific Reports |
|
2015 |
|
|
|
accepted |
|
Y. Wang |
J. Ghanbaja, S. Bruyère, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson |
„Room temperature self-assembled growth of vertically aligned columnar copper oxide nanocomposite thin films on unmatched substrates“ |
Scientific Reports 7 |
|
2017 |
|
1-9 |
DOI:10.1038/s41598-017-10540-6 |
published |
|
D. Britz |
A. Hegetschweiler, M. Roberts, F. Mücklich |
„Reproducible Surface Contrasting and Orientation Correlation of Low-Carbon Steels by Time-Resolved Beraha Color Etching“ |
Materials Performance and Characterization |
5 |
2016 |
5 |
553 - 563 |
|
published |
|
F. Mücklich |
H. Oettel, G. Petzow |
„Realstruktur von Einkristallen und die Intensitäten von Braggreflexen“ |
Zeitschrift für Metallkunde |
6 |
1993 |
|
419-425 |
|
published |
|
A. Montenegro-Hernández |
A. Soldati, L. Mogni, H. Troiani, A. Schreiber, F. Soldera, A. Caneiro |
„Reactivity at the Ln2NiO4+d/electrolyte interface (Ln = La, Nd) studied by Electrochemical Impedance Spectroscopy and Transmission Electron Microscopy“ |
Journal of Power Sources |
265 |
2014 |
|
6-13 |
DOI: 10.1016/j.jpowsour.2014.04.082 |
published |
|
P. Ferrari |
E. Ramos-Moore, M.A. Guitar, A.L. Cabrera |
„Raman analysis of ferroelectric switching in niobium-doped lead zirconate titanate thin films“ |
Thin Solid Films |
556 |
2014 |
|
539-543 |
DOI: 10.1016/j.tsf.2014.02.050 |
published |
|
F. Mücklich |
S. Hartmann, M. J. Hoffmann, G. A. Schneider, J. Ohser, G. Petzow |
„Quantitative Description of Silicon Nitride Microstructures“ |
Key Engineering Materials |
|
1994 |
|
465-469 |
|
published |
|
Rossi, P. |
Engstler, M., Mücklich, F. |
„Quantitative Classification and Assessment of Sr Modification in Hypoeutectic Al-Si and Al-Si-Mg Alloys“ |
Practical Metallography |
52 |
2015 |
10 |
571-589 |
doi: 10.3139/147.110361 |
published |
|
Y. Gaillard |
E. Jiménez-Piqué, F. Soldera, F. Mücklich, M. Anglada |
„Quantification of Hydrothermal Degradation in Zirconia by Nanoindentation“ |
Acta Materialia |
56 |
2008 |
16 |
4206-4216 |
DOI: 10.1016/j.actamat.2008.04.050 | PDF verfügbar |
published |
|
N. Ilic |
R. Rein, M. Göken, M. Kempf, F. Soldera, F. Mücklich |
„Properties of Eutectic Ru-Al Alloy Produced by Ingot Metallurgy“ |
Materials Science and Engineering A |
|
2002 |
|
38-44 |
PDF verfügbar |
published |
|
M.A. Guitar |
H. Aboulfadl, C. Pauly, P. Leibenguth, S. Migot, F. Mücklich |
„Production of single-phase intermetallic films from Ru-Al multilayers“ |
Surface and Coatings Technology |
244 |
2014 |
|
210-216 |
DOI: 10.1016/j.surfcoat.2014.02.022 |
published |
|
D. Katrakova |
M. Damgaard, F. Mücklich |
„Preparation for Electron Backscatter Diffraction with LaboPol-4 / LaboForce-1“ |
Structure |
38 |
2001 |
|
19-24 |
|
published |
|
J. Li |
J. Barrirero, G. Sha, H. Aboulfadl, F. Mücklich, P. Schumacher |
„Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ |
Acta Materialia |
|
|
|
|
|
submitted |
|
Li, J.H. |
Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F., Schumacher, P. |
„Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy“ |
Acta Materialia |
108 |
2016 |
|
207 - 218 |
doi:10.1016/j.actamat.2016.01.053 |
published |
|
A. Koblischka-Veneva |
M. R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami |
„Position-dependent Texture Analysis of Melt-textured YBCO by Means of Electron Backscatter Diffraction“ |
Physica C |
392 |
2003 |
|
607-612 |
|
published |
|
J. Rager |
A. Nagel, M. Schwenger, A. Flaig, G. Schneider, F. Mücklich |
„Platinum Ceramic Composites as New Electrode Materials: Fabrication, Sintering, Microstructure and Properties“ |
Advanced Engineering Materials |
8 |
2006 |
1 |
81-88 |
DOI: 10.1002/adem.200500192 | PDF verfügbar |
published |
|
K. Khurana |
F. Müller, K. Jacobs, T. Faidt, J.-U.Neurohr, S. Grandthyll, F. Mücklich, C. Canal, M. Pau Ginebra |
„Plasma polymerized bioceramics for drug delivery: Do surface changes alter biological behaviour?“ |
European Polymer Journal |
107 |
2018 |
|
25-33 |
|
published |
|
Dalibón, E.L. |
Guitar, M.A., Trava-Airoldi, V., Mücklich, F., Brühl, S.P. |
„Plasma nitriding and DLC coatings for corrosion protection of precipitation hardening stainless steel“ |
Advanced Engineering Materials |
18 |
2015 |
5 |
826-832 |
DOI: 10.1002/adem.201500411 |
published |
|
Z. Liu |
X. K. Meng, T. Recktenwald, F. Mücklich |
„Patterned Intermetallics Reaction of Ni3Al by Laser Interference Structuring“ |
Materials Science & Engineering |
|
2003 |
|
101-103 |
|
published |
|
A. Rosenkranz |
L. Reinert, C. Gachot, H. Aboulfadl, S. Grandthyll, K. Jacobs, F. Müller, F. Mücklich |
„Oxide formation, morphology and nanohardness of laser-patterned steel surfaces“ |
Advanced Engineering Materials |
17 |
2015 |
8 |
1234-1242 |
DOI: 10.1002/adem.201400487 |
published |
|
S. Stanojevic |
I. Gallino, H. Aboulfadl, M. Sahin, F. Mücklich, R. Busch |
„Oxidation of glassy Ni–Nb–Sn alloys and its influence on the thermodynamics and kinetics of crystallization“ |
Acta Materialia |
102 |
2016 |
|
176-186 |
|
published |
|
J. Rager |
A. Flaig, G. Schneider, T. Kaiser, F. Soldera, F. Mücklich |
„Oxidation Damage of Spark Plug Electrodes“ |
Advanced Engineering Materials |
7 |
2005 |
|
633-640 |
DOI: 10.1002/adem.200500025 | PDF verfügbar |
published |
|
M. R. Koblischka |
A. Koblischka-Veneva, E.S. Reddy, G. J. Schmitz, K. Ogasawara, M. Murakami |
„Orientations of Y2BaCuO5 and YBCO within Melt-textured and Directional Solidified Samples Studied by EBSD“ |
Physica C |
392 |
2003 |
|
589-595 |
|
published |
|
A. Koblischka-Veneva |
M. R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami |
„Orientation Imaging Microscopy Analysis of Bulk, Melt-textured YBCO Superconductors“ |
Crystal Engineering |
5 |
2002 |
|
265-272 |
|
published |
|
C. Carrasco |
G. Inzunza, C. Camurri, C. Rodríguez, L. Radovic, F. Soldera, S. Suarez |
„Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans“ |
Materials Science & Engineering |
617 |
2014 |
|
146–155 |
DOI: 10.1016/j.msea.2014.08.057 |
published |
|
D. Britz |
A. Hegetschweiler, F. Mücklich |
„Opening the door to fundamental understanding of structure and color metallography - A correlative Microscopy Study on Steel“ |
Microscopy and Microanalysis |
20 |
2014 |
|
834-835 |
|
published |
|
J. Riedrich-Möller |
L. Kipfstuhl, C. Hepp, E. Neu, C. Pauly, F. Mücklich, A. Baur, M. Wandt, S. Wolff, M. Fischer, S. Gsell, M. Schreck, C. Becher |
„One- and two-dimensional photonic crystal microcavities in single crystal diamond“ |
Nature Nanotechnology |
7 |
2012 |
|
69-74 |
DOI:10.1038/nnano.2011.190 | PDF verfügbar |
published |
|
D. Acevedo |
E. Frontera, M. Broglia, F. Mücklich, C. Miras, C. Barbero |
„One Step Lithography of Polypyrrole“ |
Advanced Engineering Materials |
13 |
2011 |
5 |
405-410 |
DOI: 10.1002/adem.201000295 |
published |
|
M. Linz |
M.R. Ripoll, C. Gachot, C .Pauly, F. Franek, F. Mücklich |
„On the competition between plastic deformation and material detachment in ferritic/pearlitic steel under boundary lubrication“ |
Wear |
376 |
2017 |
|
813-821 |
|
published |
|
U. Scholz |
D. Plachke, W. Yuan, H.-J. Carstanjen, F. Mücklich, G. Petzow |
„On the Influence of Impurities in Beryllium Single Crystal Growth“ |
Journal of Crystal Growth |
169 |
1996 |
|
575-577 |
|
published |
|
A. Rosenkranz |
T. Heib, C. Gachot, F. Mücklich |
„Oil film life time and wear particle analysis of laser-patterned stainless steel surfaces“ |
Wear |
334-335 |
2015 |
|
1-12 |
DOI: 10.1016/j.wear.2015.04.006 |
published |
|
K. Woll |
I. E. Gunduz, C. Pauly, C. C. Doumanidis, S. F. Son, C. Rebholz, F. Mücklich |
„Numerical modeling of self-propagating reactions in Ru/Al nanoscale multilayer foils“ |
Applied Physics Letters |
107 |
2015 |
|
|
doi: 10.1063/1.4928665 |
published |
|
J. H. Li |
J. Barrirero, M. Engstler, H. Aboulfadl, F. Mücklich, P. Schumacher |
„Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition“ |
Metallurgical and Materials Transactions A |
46 |
2015 |
3 |
1300-1311 |
DOI: 10.1007/s11661-014-2702-6 |
published |
|
W. Chamorro |
D. Horwat, P. Pigeat, P. Miska, S. Migot, F. Soldera, P. Boulet, F. Mücklich |
„Near-room temperature single-domain epitaxy of reactively sputtered ZnO films“ |
Journal of Physics D: Applied Physics |
46 |
2013 |
255 |
1-7 |
DOI: 10.1088/0022-3727/46/23/235107 | PDF verfügbar |
published |
|
R. Albrecht |
A. Bommer, C. Pauly, F. Mücklich, A. W. Schell, P. Engel, T. Schröder, O. Benson, J. Reichel, C. Becher |
„Narrow-band single photon emission at room temperature based on a single nitrogen-vacancy center coupled to an all-fiber-cavity“ |
Applied Physics Letters |
105 |
2014 |
7 |
73113 |
DOI: 10.1063/1.4893612 |
published |
|
R. Forsén |
I. C. Schramm, P. O. Å. Persson, F. Mücklich, M. Odén, N. Ghafoor |
„Nanostructuring and coherency strain in multicomponent hard coatings“ |
APL Materials |
2 |
2014 |
|
|
DOI: 10.1063/1.4901125 |
published |
|
Y. Motemani |
D. Khare, A. Savan, M. Hans, A. Paulsen, J. Franzel, C. Somsen, F. Mücklich, G. Eggeler, A. Ludwig |
„Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition“ |
Nanotechnology |
27 |
2016 |
|
495604 |
|
published |
|
S. Bagherifard |
S. Slawik, I. Fernández-Pariente, C. Pauly, F. Mücklich, M. Guagliano |
„Nanoscale surface modification of AISI 316L stainless steel by severe shot peening“ |
Materials & Design |
102 |
2016 |
|
68-77 |
doi:10.1016/j.matdes.2016.03.162 |
published |
|
J. Riedrich-Möller |
S. Pezzagna, J. Meijer, C. Pauly, F. Mücklich, M. Markham, A. Edmonds, C. Becher |
„Nanoimplantation and Purcell enhancement of single nitrogen-cacany center in photonic crystal cavities in diamond“ |
Applied Physics Letters |
106 |
2015 |
|
221103 |
|
published |
|
R. Catrin |
D. Horwat, J.-F. Pierson, S. Migot, Y. Hu, F. Mücklich |
„Nano-Scale and Surface Precipitation of Metallic Particles in Laser Interference Patterned Noble Metal Oxide Thin Films“ |
Applied Surface Science |
257 |
2011 |
12 |
5223-5229 |
DOI:10.1016/j.apsusc.2010.11.060 | PDF verfügbar |
published |
|
F. Lasagni |
A. Lasagni, M. Engstler, H. P. Degischer, F. Mücklich |
„Nano-characterization of Cast Structures by FIB-Tomography“ |
Advanced Engineering Materials |
10 |
2008 |
1 |
62-66 |
DOI: 10.1002/adem.200700249 | PDF verfügbar |
published |
|
F. Mücklich |
M. Engstler |
„Microstructure Tomography in the Micro, Nano and Atomic scale – Advanced Access to Understand Local Formation as well as Degradation of Materials Microstructure“ |
Microscopy and Microanalysis |
16 |
2010 |
2 |
688-689 |
DOI: 10.1017/S1431927610063154 | PDF verfügbar |
published |
|
R. Catrin |
T. Gries, D. Horwat, S. Migot, F. Mücklich |
„Microstructure of Sputter-deposited Noble Metal-Incorporated Oxide Thin Films Patterned by Means of Laser Interference“ |
Proceedings of the Materials Research Society |
1339 |
2011 |
|
|
DOI: 10.1557/opl.2011.861 |
published |
|
F. Fourouzan |
S Gunasekaran, A. Hedayati, E. Vuorinen, F. Mücklich |
„Microstructure Analysis and Mechanical Properties of Low Alloy High Strength Quenchend and Partitioned Steel“ |
Solid State Phenomena |
258 |
2016 |
|
574-578 |
doi: 10-4028/www.scientific.net/SSP.258.574 |
published |
|
F. Forouzan |
S. Gunasekaran, Al Hedayati, E. Vuorinen, F. Mücklich |
„Microstructure analysis and mechanical properties of low alloy high strength quenched and partitioned steel“ |
Solid State Phenomena |
258 |
2017 |
|
574 - 578 |
|
published |
|
R. Catrin |
A. Lasagni, C. Gachot, U. Schmid und F. Mücklich |
„Microstructural Design of Advanced Architectures in Titanium/Platinum Thin Films by Laser Interference Metallurgy“ |
Advanced Engineering Materials |
10 |
2008 |
5 |
466-470 |
DOI:10.1002/adem.200700328 | PDF verfügbar |
published |
|
B. Raillard |
C. Gachot, M. Hans, P. Leibenguth, F. Mücklich |
„Microstructural characterization of laser-irradiated bulk copper under dry sliding conditions“ |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
226 |
2012 |
6 |
541-551 |
DOI: 10.1177/1350650112440924 | PDF verfügbar |
published |
|
C. Gachot |
CJ Hsu, S Suarez, P Grützmacher, A Rosenkranz, A Stratmann, G Jacobs |
„Microstructural and Chemical Characterization of the Tribolayer Formation in Highly Loaded Cylindrical Roller Thrust Bearings“ |
Lubricants |
4 |
2016 |
2 |
19 |
DOI:10.3390/lubricants4020019 |
published |
|
E. Roitero |
M. Anglada, F. Mücklich, E. Jimenez-Pique |
„Mechanical reliability of dental grade zirconia after laser patterning“ |
Journal of Mechanical Behavior of Biomedical Materials |
86 |
2018 |
|
257-263 |
|
published |
|
D. Bruch |
D. Henes, P. Leibenguth, C. Holzapfel |
„Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Forgings with Large Wall Thicknesses“ |
La Metallurgica Italiana |
|
2008 |
6 |
7-13 |
17-19.06.2007, Grado, Italien |
published |
|
G. Grass |
M. Hans, F. Mücklich, M. Solloz, C. Rensing |
„Massive Kupferwerkstoffe in der Hygiene und Infektionsprävention“ |
Hygiene&Medizin |
40 |
2015 |
11 |
458-463 |
|
published |
|
A. Szurdak |
A. Rosenkranz, C. Gachot, G. Hirt, F. Mücklich |
„Manufacturing and tribological investigation of hot micro-coined lubrication pockets“ |
Key Engineering Materials |
611-612 |
2014 |
|
417-424 |
DOI: 10.4028/www.scientific.net/KEM.611-612.417 |
published |
|
R. Hermann |
H. Vinzelberg, G. Behr, K. Woll, F. Mücklich, B. Büchner |
„Magnetic Field Controlled Floating-Zone Crystal Growth and Properties of RuAl Single Crystal“ |
Journal of Crystal Growth |
310 |
2008 |
|
4286-4289 |
DOI: 10.1016/j.jcrysgro.2008.06.082 | PDF verfügbar |
published |
|
F. Mücklich |
C. Gachot, R. Catrin, U. Schmid, A. Lasagni |
„Macroscopic 2D Design of Micro/Nano Grain Architectures by Laser Interference Metallurgy“ |
Mater. Res. Soc. Symp. Proc. |
1059-KK04- |
2008 |
|
|
|
published |
|
R. Szamocki |
A. Velichko, C. Holzapfel, F. Mücklich, S. Ravaine, P. Garrigues, N. Sojic, R. Hempelmann, A. Kuhn |
„Macroporous Ultramicroelectrodes for Improved Electroanalytical Measurements“ |
Analytical Chemistry |
79 |
2007 |
2 |
533-539 |
|
published |
|
E. Roitero |
M. Ochoa, M. Anglada, F. Mücklich, E. Jimenez-Pique |
„Low temperature degradation of laser patterned 3Y-TZP: Enhancement of resistance after thermal treatment“ |
Journal of the European Ceramic Society |
38 |
2018 |
|
1742-1749 |
10.1016/j.jeurceramsoc.2017.10.044 |
published |
|
S. Bettscheider |
P.G. Grützmacher, A. Rosenkranz |
„Low friction and high solid-solid contactratio - a contradiction for laser-patterened surfaces?“ |
Lubricants |
5 |
2017 |
35 |
|
doi:10.3390/lubricants5030035 |
published |
|
L. Reinert |
F. Lasserre, C. Gachot, P. Grützmacher, T. MacLucas, N. Souza, F. Mücklich, S. Suarez |
„Long-lasting solid lubrication by CNT-coated patterned surfaces“ |
Scientific Reports |
7 |
2017 |
|
42873 |
Doi: 10.1038/srep42873 |
published |
|
W. Chamorro |
J. Ghanbaja, Y. Battie, A. en Naciri, F. Soldera, F. Mücklich, D. Horwat |
„Local Structure-Driven Localized Surface Plasmon Absorption and Enhanced Photoluminescence in ZnO-Au thin Films“ |
Journal of Physical Chemistry |
|
2016 |
|
|
|
accepted |
|
C. de Melo Sánchez |
M. Jullien, J. Ghanbaja, F. Montaigne, J.-F. Pierson, F. Soldera, F. Rigoni, N. Almqvist, A. Vomiero, F. Mücklich, D. Horwat |
„Local structure and point defects-dependent Area-Selective Atomic Layer Deposition Approach for Facile Synthesis of p-Cu2O/n-ZnO Segmented Nano-junctions “ |
ACS Applied Materials & Interfaces |
|
2018 |
|
|
|
accepted |
|
T. Gries |
R. Catrin, S. Migot, F. Soldera, J.-L. Endrino, A. R. Landa-Canovas, F. Cleymand, D. Mangin, F. Mücklich, D. Horwat |
„Local Modification of the Microstructure and Electrical Properties of Multifunctional Au–YSZ Nanocomposite Thin Films by Laser Interference Patterning“ |
Applied Material Interfaces |
6 |
2014 |
16 |
13707–13715 |
DOI: 10.1021/am503160w |
published |
|
Y. Wang |
J. Ghanbaja, F. Soldera, P. Boulet, D. Horwat, F. Mücklich, J.-F. Pierson |
„Local Homoepitaxial Growth in Sputtered NiO Thin Films: An Effective Approach to Tune the Crystallization, Preferred Growth Orientation, and Electrical Properties“ |
Phys. Status Solidi, RRL |
12 |
2018 |
|
|
DOI: 10.1002/pssr.201800191 |
published |
|
J.-F. Pierson |
Y. Wang, J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich |
„Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ |
CrystEngComm |
18 |
2015 |
|
1732-1739 |
|
published |
|
Y. Wang |
J. Ghanbaja, S. Bruyère, P. Boulet, F. Soldera, D. Horwat, F. Mücklich, J. F. Pierson |
„Local heteroepitaxial growth to promote the selective growth orientation, crystallization and interband transition of sputtered NiO thin films“ |
CrystEngComm |
18 |
2016 |
|
1732 |
DOI: 10.1039/c5ce02419f |
published |
|
A. Rosenkranz |
J. C. Pangraz, C. Gachot, F. Mücklich |
„Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning“ |
Wear |
368-369 |
2016 |
|
350-357 |
DOI: 10.1016/j.wear.2016.10.008 |
published |
|
N. Shulumba |
O. Hellman, Z. Raza, B. Alling, J. Barrirero, F. Mücklich, I.A. Abrikosov, M. Odén |
„Lattice Vibrations Change the Solid Soubility of an Alloy at High Temperatures“ |
Phy. Rev. Lett. |
117 |
2016 |
|
205502 |
|
published |
|
M. Hans |
C. Gachot, R. Catrin, B. Raillard, F. Mücklich |
„Laserinterferenzstrukturierung zur Funktionalsisierung von Kupferwerkstoffen“ |
Metall |
63 |
2009 |
11 |
579-581 |
|
published |
|
A. Rosenkranz |
M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mücklich |
„Laser Surface Patterning - Tailoring of Contact Area for Frictional and Antibacterial Properties“ |
Lubricants |
4 |
2016 |
|
15 |
Accepted in Lubricants 19.01.2016; doi:10.3390/lubricants4010002 |
published |
|
F. Mücklich |
A. Lasagni, C. Daniel |
„Laser Interference Metallurgy – Periodic Surface Patterning and Formation of Intermetallics“ |
Intermetallics |
13 |
2005 |
3 |
437-442 |
DOI: 10.1016/j.intermet.2004.07.005 | PDF verfügbar |
published |
|
F. Mücklich |
A. Lasagni, C. Daniel |
„Laser Interference Metallurgy - Using Interference as a Tool for Micro/Nano Structuring“ |
Zeitschrift für Metallkunde |
97 |
2006 |
10 |
1337-1344 |
PDF vergügbar | ausgezeichnet mit dem Werner-Köster-Preis 2006 der DGM und des Carl-Hanser-Verlages |
published |
|
M. Hans |
J. C. Támara, S. Mathews, B. Bax, A. Hegetschweiler, R. Kautenburger, M. Solioz, F. Mücklich |
„Laser cladding of stainless steel with a copper–silver alloy to generate surfaces of high antimicrobial activity“ |
Applied Surface Science |
320 |
2014 |
|
195-199 |
DOI: 10.1016/j.apsusc.2014.09.069 |
published |
|
A. Lasagni |
M. Cornejo, F. Lasagni, F. Mücklich |
„Laser Ablation Modeling of Periodic Pattern Formation on Polymer Substrates“ |
Advanced Engineering Materials |
10 |
2008 |
5 |
488-493 |
DOI: 10.1002/adem.200700323 | PDF verfügbar |
published |
|
E. Detemple |
P. Leibenguth, C. Gachot, F. Mücklich |
„Large-Area Patterned Formation of Intermetallic Phases on Ti/Al Multilayer Systems by Laser Interference Metallurgy“ |
Thin Solid Films |
519 |
2010 |
2 |
736-741 |
DOI:10.1016/j.tsf.2010.08.142 | PDF verfügbar |
published |
|
D. Acevedo |
A. Lasagni, M. Cornejo, M. Politano, C. Barbero, F. Mücklich |
„Large Area Fabrication of Tuned Polystyrene/Poly-methylmethacrylate Periodic Structures using Laser Interference Patterning“ |
Langmuir |
25 |
2009 |
16 |
9624 |
DOI: 10.1021/la9007944 | PDF verfügbar |
published |
|
S.-M. Liang |
M. Engstler, V. Groten, J. Barrirero, F. Mücklich, A. Bührig-Polaczek, R. Schmid-Fetzer |
„Key experiments and thermodynamic revision of the binary Al–Sr system“ |
Journal of Alloys and Compounds |
610 |
2014 |
|
443-450 |
DOI: 10.1016/j.jallcom.2014.05.018 |
published |
|
E. Ramos-Moore |
C. Espinoza, R. S. Coelho, H. Pinto, P. Brito, F. Soldera, F. Mücklich, J. L. Garcia |
„Investigations on Thermal Stresses of a Graded Ti(C,N) Coating Deposited on WC-Co Hardmetal“ |
Advanced Materials Research |
996 |
2014 |
|
848-854 |
DOI: 10.4028/www.scientific.net/AMR.996.848 |
published |
|
I. El Azhari |
J. Garcia M. Zamanzade, F. Soldera, C. Pauly, L. Llanes, F. Mücklich |
„Investigations on micro-mechanical properties of polycrystalline Ti(C, N) and Zr(C,N) coatings“ |
Acta Materialia |
149 |
2018 |
|
364-376 |
|
published |
|
H.A. Gobran |
K. W. Liu, D. Heger, F. Mücklich |
„Investigation on Point Defect Structure in Single Phase B2 Type RuAl Alloys by Lattice Parameter Measurements“ |
Scripta Materialia |
49 |
2003 |
12 |
1097-1102 |
|
published |
|
F. Soldera |
G. Burdiles, U. Schmid, H. Seidel, F. Mücklich |
„Investigation of the Interaction between Electrical Discharges and Low Resistivity Silicon Substrates“ |
Applied Surface Science |
254 |
2008 |
7 |
2150-2157 |
DOI: 10.1016/j.apsusc.2007.08.087 | PDF verfügbar |
published |
|
Y. Hao |
F. Mücklich, G. Petzow |
„Investigation of the Dislocation Structure in hcp Single Crystals by Means of the Rocking Crystal Method“ |
Acta Metallurgica Sinica |
33 |
1997 |
2 |
198-206 |
|
published |
|
A. Koblischka-Veneva |
C. Gachot, P. Leibenguth, F. Mücklich |
„Investigation of Microstructure of Bulk Ni2MnGa Alloy by Means of Electron Backscatter Diffraction Analysis“ |
Journal of Magnetism and Magnetic Materials |
316 |
2007 |
|
e431-e434 |
presented at III JOINT EUROPEAN MAGNETIC SYMPOSIA, June 3026, 2006, San Sebastian, Spain |
published |
|
A. Koblischka-Veneva |
M R. Koblischka, K. Ogasawara, F. Mücklich, M. Murakami |
„Interplay of YBCO and Embedded 211 Particles in Melt-Textured YBCO“ |
Journal of Superconductivity |
18 |
2005 |
4 |
469-474 |
DOI: 10.1007/s10948-005-0027-9 | PDF verfügbar |
published |
|
A. I. Kovalev |
D.L. Wainstein, A. Yu. Rashkovskiy, R. Gago, F. Soldera, J. I. Endrino, G. S. Fox-Rabinovich |
„Interface-Induced Plasmon Nonhomogeneity in Nanostructured Metal-Dielctric Planar Metamaterial“ |
Journal of Nanomaterials |
|
2015 |
|
|
DOI:10.1155/2015/876247, art. no. 876247, Open Access Publication |
published |
|
A. Koblischka-Veneva |
M. R. Koblischka, F. Mücklich, K. Ogasawara, M. Murakami |
„Interactions of Y2BaCuO5 Particles and the YBCO Matrix within Melt-Textured YBCO Samples Studied by Means of EBSD“ |
Superconductor Science and Technology |
18 |
2005 |
|
158-163 |
DOI: 10.1088/0953-2048/18/2/032 | PDF verfügbar |
published |
|
C. Mähler |
F. Mücklich, G. Weikum |
„Intelligente Suche nach Ätzrezepturen für Werkstoffe“ |
(referiertes) Proceeding der 8. GI-Fachtagung über Datenbanksysteme in Büro, Technik und Wissenschaft |
|
1999 |
|
69-79 |
Freiburg; A.P. Buchmann (Ed.), Springer-Verlag |
published |
|
C. M. Menezes |
N. Bogoni Jr., J. Barrirero, H. Aboulfadl, F. Mücklich, C. A. Figueroa |
„Influence of the surface chemistry - structure relationship on the nanoscale friction of nitrided and post-oxidized iron“ |
Surface & Coatings Technology |
|
2016 |
|
|
10.1016/j.surfcoat.2016.07.095 |
in press |
|
C. Schäfer |
L. Reinert, T. MacLucas, P. Grützmacher, R. Merz, F. Mücklich and S. Suarez |
„Influence of surface design on the solid lubricity of carbon nanotubes-coated steel surfaces“ |
Tribology letters |
|
2018 |
|
66-89 |
|
published |
|
R. Catrin |
D. Horwat, T. Gries, B. Raillard, S. Migot, F. Mücklich |
„Influence of Laser Interference Patterning on Microstructure and Friction Behaviour of Gold/Yttria-Stabilized Zirconia Nanocomposite Thin Films“ |
Journal of Materials Research |
27 |
2012 |
6 |
879-885 |
DOI:10.1557/opl.2011.861. | PDF verfügbar |
published |
|
A.I. Kovalev |
A. Rashkovskiy, Yu., D. L. Wainstein, R. Gago, F. Soldera, J. L. Endrino |
„Influence of electronic structure, plasmon-phonon and plasmon-polariton excitations on anomalously low heat conductivity in TiAlN/Ag nanoscale multilayer coatings“ |
Current Applied Physics |
16 |
2016 |
4 |
459-468 |
DOI: 10.1016/j.cap.2016.01.012 |
published |
|
M. Duarte |
A. Lasagni, R. Giovanelli, J. Narciso, E. Louis, F. Mücklich |
„Increasing Lubricant Lifetime by Grooving Periodical Patterns using Laser Interference Metallurgy“ |
Advanced Engineering Materials |
10 |
2008 |
6 |
554-558 |
DOI: 10.1002/adem.200700321 | PDF verfügbar |
published |
|
N. Souza |
M. Zeiger, V. Presser, F. Mücklich |
„In situ tracking of defect healing and purification of single-wall carbon nanotubes with laser radiation by time-resolved Raman spectroscopy“ |
RSC Advances |
5 |
2015 |
76 |
62149 - 62159 |
doi:10.1039/C5RA09316C |
published |
|
A. Rosenkranz |
A. Stratmann, C. Gachot, G. Burghardt, G. Jacobs, F. Mücklich |
„Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three Beam Laser Interference“ |
Advanced Engineering Materials |
18 |
2016 |
5 |
854-862 |
DOI: 10.1002/adem.201500320 |
published |
|
R. Szamocki |
A. Velichko, F. Mücklich, S. Reculusa, S. Ravaine, S. Neugebauer, W. Schuhmann, R. Hempelmann, A. Kuhn |
„Improved enzyme immobilization for enhanced bioelectrocatalytic activity of porous electrodes“ |
Electrochemistry Communications |
9 |
2007 |
8 |
2121-2127 |
|
published |
|
C. Pauly |
K. Woll, I. Gallino, M. Stüber, H. Leiste, R. Busch, F. Mücklich |
„Ignition in termaryRu/Al-based reactive multilayers - Effects of chemistry and stacking sequence“ |
Journal of Applied Physics |
124 |
2018 |
|
|
|
published |
|
S. Bettscheider |
C. Gachot, A. Rosenkranz |
„How to measure the real contact area? A simple marker and relocation foot-printing approach“ |
Tribology International |
|
2016 |
|
|
Accepted in Tribology International 26.06.2016 |
accepted |
|
P. Grützmacher |
A. Rosenkranz, C. Gachot |
„How to Guide Lubricants - Tailored Laser Surface Patterns on Stainless Steel“ |
Applied Surface Science |
370 |
2016 |
|
59-66 |
DOI: 10.1016/j.apsusc.2016.02.115 |
published |
|
Rossi, P. |
Engstler, M., Mücklich, F. |
„Homogeneity Quantification Method and its Application to Microstructure Assessment“ |
Practical Metalography |
51 |
2014 |
|
180-199 |
|
published |
|
M. A. Guitar |
S. Suárez, O.Prat, M.Duarte Guigou, V. Gari, G. Pereira, F. Mücklich |
„High Chromium Cast Irons: Destabilized-Subcritical Secondary Carbide Precipitation and its Effect on Hardness and Wear Properties“ |
Journal of Materials Engineering and Performance |
27 |
2018 |
|
3877-3885 |
|
published |
|
M. Linz |
M. Rodriguez Ripoll, C. Pauly, J. Bernardi, A. Steiger-Thirsfeld, F. Franek, F. Mücklich, C. Gachot |
„Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic-Pearlitik Steel durin Lubricated Sliding“ |
Advanced Engineering Materials |
|
2018 |
|
|
|
published |
|
K. Yalamanchili |
F. Wang, H. Aboulfadl, J. Barrirero, L. Rogström, E. Jiménez-Pique, F. Mücklich, F. Tasnadi, M. Odén, N. Ghafoor |
„Growth and thermal stability of TiN/ZrAlN: Effect of internal interfaces“ |
Acta Materialia |
121 |
2016 |
|
396 - 406 |
doi:10.1016/j.actamat.2016.07.006 |
published |
|
F. Mücklich |
M. Engstler |
„Gefügetomografie mit Ionen- und Elektronenstrahlen: Ein Werkzeug zur Klärung komplexer Gefügebildung und lokaler Gefügedegradation“ |
Journal of Heat Treatment of Materials |
64 |
2009 |
5 |
262-269 |
PDF verfügbar |
published |
|
P. Grützmacher |
A. Rosenkranz, A. Szurdak, F. König, G. Jacobs, G. Hirt, F. Mücklich |
„From lab to application - Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns“ |
Tribology International |
127 |
2018 |
|
500-508 |
|
published |
|
A. E. Giba |
P. Pigeat, S. Bruyère, H. Rinnert, F. Soldera, F. Mücklich, D. Horwat |
„From Blue to White Luminescence in Cerium-Doped Aluminum Oxynitride: Electronic Structure and Local Chemistry Perspectives“ |
The Journal of Physical Chemistry |
|
2018 |
|
|
|
accepted |
|
S. Fang |
L. Llanes, S. Klein, C. Gachot, A. Rosenkranz, D. Bähre, F. Mücklich |
„Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser“ |
IOP Conference Series: Materials Sience and Engineering |
258 |
2017 |
|
1-6 |
DOI: 10.1088/1757-899X/258/1/012006 |
published |
|
A. Rosenkranz |
A. Szurdak, C. Gachot, G. Hirt, F. Mücklich |
„Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns“ |
Tribology International |
95 |
2016 |
|
290-297 |
DOI:10.1016/j.triboint.2015.11.035 |
published |
|
A. Rosenkranz |
A. Szurdak, P. Grützmacher, G. Hirt, F. Mücklich |
„Friction reduction induced by elliptical surface patterns under lubricated conditions“ |
Advanced Engineering Materials |
|
2017 |
255 |
1-7 |
DOI: 10.1002/adem.20170031 |
published |
|
K. W.Liu |
F. Mücklich, R. Birringer |
„Formation of Eutectic RuAl/Ru Nanocomposite by Mechanical Alloying and Subsequent Annealing“ |
Journal of Materials Research |
16 |
2001 |
9 |
2459-2462 |
|
published |
|
K. W. Liu |
F. Mücklich, R. Birringer |
„Formation of Eutectic RuAl/Ru Nanocomposite by Mechanical Alloying and Subsequent Annealing“ |
Journal of Materials Research |
16 |
2001 |
|
2459-2462 |
|
published |
|
F. Soldera |
N. Ilic, S. Brännström, I. Barrientos, H. Gobran, F. Mücklich |
„Formation of Al2O3 Scales on Single Phase RuAl Produced by Reactive Sintering“ |
Oxidation of Metals |
59 |
2003 |
5 |
529-542 |
PDF verfügbar |
published |
|
E. Jiménez-Piqué |
A. Ramos, J. A. Muñoz-Tabares, A. Hatton, F. Soldera, F. Mücklich, M. Anglada |
„Focused ion beam tomography of zirconia degraded under hydrothermal conditions“ |
Journal of the European Ceramic Society |
32 |
2012 |
10 |
2129-2136 |
DOI:10.1016/j.jeurceramsoc.2012.02.011 | PDF verfügbar |
published |
|
F. Soldera |
Y. Gaillard, M. Anglada Gomila, F. Mücklich |
„FIB-Tomography of Nanoindentation Cracks in Zirconia Polycrystals“ |
Microscopy and Microanalysis |
13 |
2007 |
2 |
1510-1511 |
DOI: 10.1017/S1431927607075654 | PDF verfügbar |
published |
|
F. Soldera |
A. Lasagni, F. Mücklich |
„FEM-Simulation of the Electrode Temperature Distribution and Crater Formation. Part I: Breakdown of an Electrical Discharge“ |
Journal de Physique IV |
120 |
2004 |
|
429-437 |
DOI: 10.1051/jp4:2004120049 | PDF verfügbar |
published |
|
A. I. Kovalev |
D. L. Wainstein, V. O. Vakhrushev, R. Gago, F. Soldera, J. L. Endrino, G. S. Fox-Rabinovich, S. Veldhuis |
„Features of electronic and lattice mechanisms of transboundary heat transfer in multilayer nanolaminate TiAlN/Ag coatings“ |
Scientific Reports |
7 |
|
|
17078 |
DOI:10.1038/s41598-017-17291-4 |
published |
|
T. Dahmen |
M. Engstler, C. Pauly, P. Trampert, N. de Jonge, F. Mücklich, P. Slusallek |
„Feature Adaptive Sampling for Scanning Electron Microscopy“ |
Scientific Reports Nature Publishing Group |
|
2016 |
|
|
DOI: 10.1038/srep25350 |
published |
|
D. Acevedo |
H. Salavagione, A. Lasagni, E. Morallon, F. Mücklich, C. Barbero |
„Fabrication of Highly Ordered Arrays of Platinum Nanoparticles Using Direct Laser Interference Patterning“ |
ACS Applied Materials & Interfaces |
1 |
2009 |
3 |
549 |
DOI: 10.1021/am900075z | PDF verfügbar |
published |
|
P.K. Yalamanchili |
F. Wang, I. Schramm, J.M. Andersson, M.P.J. Joesaar, F. Tasnádi, F. Mücklich, N. Ghafoor, M. Odén |
„Exploring the high entropy alloy concept in (AlTiVNbCr)N“ |
Thin Solid Films |
636 |
2017 |
|
346-352 |
|
published |
|
K. Roberts |
G. Weikum, F. Mücklich |
„Examinations of the Automatic Classification of Lamellar Graphite Using the Support Vector Machine“ |
Practical Metallography |
42 |
2005 |
|
396-410 |
PDF verfügbar |
published |
|
A. Velichko |
A. Wiegmann, F. Mücklich |
„Estimation of the Effective Conductivities of Complex Cast Iron Microstructures using FIB-tomographic Analysis“ |
Acta Materialia |
57 |
2009 |
|
5023-5035 |
DOI:10.1016/j.actamat.2009.07.004 | PDF verfügbar |
published |
|
E. Ramos-Moore |
P. Leibenguth, S. Slawik, R.S.Coelho, D. Horwat, S. Migot, B. Lechthaler, F. Mücklich |
„Estimation of residual stresses in perovskite fims for capacitor applications“ |
Thin Solid Films |
648 |
2018 |
|
21-25 |
|
published |
|
S. Suarez |
A. Rosenkranz, C. Gachot, F. Mücklich |
„Enhanced tribological properties of MWCNT/Ni bulk composites – Influence of processing on friction and wear behaviour“ |
Carbon |
66 |
2014 |
|
164-171 |
DOI: 10.1016/j.carbon.2013.08.054 | PDF verfügbar |
published |
|
K.M. Calamba |
I.C. Schramm, M.P. Johansson Joesaar, J. Ghanbaja, J.F. Pierson, F. Mücklich, M. Odén |
„Enhanced thermal stability and mechanical properties of nitrogen deficient titanium aluminum nitride (Ti0.54AI0.46Ny) thin films by tuning the applied negative bias voltage“ |
Journal of Applied Physics |
122 |
2017 |
255 |
|
|
published |
|
C.J. Hsu |
A. Stratmann, A. Rosenkranz, C. Gachot |
„Enhanced growth of ZDDP based tribofims on laser-interference patterned cylinder roller bearings“ |
Lubricants |
5 |
2017 |
39 |
doi:10.3390/lubrican |
|
published |
|
F. Müller |
C. Zeitz, H. Mantz, K.-H. Ehses, F. Soldera, J. Schmauch, M. Hannig, S. Hüfner, K. Jacobs |
„Elemental Depth Profiling of Fluoridated Hydroxyapatite: Saving Your Dentition by the Skin of Your Teeth?“ |
Langmuir |
26 |
2010 |
24 |
18750-18759 |
DOI: 10.1021/la102325e | PDF verfügbar |
published |
|
Y. Wang |
S. Lany, J. Ghanbaja, Y. Fagot-Revurat, Y.P. Chen, F. Soldera, D. Horwat, F. Mücklich, J.F. Pierson |
„Electronic structures of Cu2O, Cu4O3, and CuO: A joint experimental and theoretical study“ |
Physical Review B |
94 |
2016 |
255 |
|
DOI: 10.1103/PhysRevB.94.245418 |
published |
|
Holzapfel, C. |
Pauly, C. Engstler, M., Mücklich, F. |
„Electron beam characterization techniques for the study of wear in sliding contacts“ |
Electrical Contacts (Holm), 2015 IEEE 61st Holm Conference on Electrical Contacts |
|
2015 |
|
227-234 |
doi: 10.1109/HOLM.2015.7355102 |
published |
|
M. Alishahi |
F. Mahboubi, S.M. Mousavi Khoie, M. Aparicio, R. Hübner, F. Soldera, R. Gago |
„Electrochemical behavior of nanocrystalline Ta/TaN multilayer on 316L stainless steel: Novel bipolar plates for proton exchange membrane fuel-cells“ |
Journal of Power Sources |
322 |
2016 |
|
1-9 |
dx.doi.org/10.1016/jpowsour.2016.04133 |
published |
|
A. Ababneh |
A. N. Al-Omari, A. M. K. Dagamseh, M. Tantawi, C. Pauly, F. Mücklich, D. Feili, H. Seidel |
„Electrical and morphological characterization of platinum thin-films with various adhesion layers for high temperature applications“ |
Microsystem Technologies |
23 |
2017 |
3 |
703-709 |
|
published |
|
D. Horwat |
M. Dehmas, A. Gutiérrez, J.-F. Pierson, A. Anders, F. Soldera, J.-L. Endrino |
„Efficient, Low Cost Synthesis of Sodium Platinum Bronze NaxPt3O4“ |
Chemistry of Materials |
24 |
2012 |
13 |
2429-2432 |
DOI: dx.doi.org/10.1021/cm301179x | PDF verfügbar |
published |
|
P.G. Grützmacher |
A. Rosenkranz, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich |
„Effects of Multi-Scale Patterning on the Run-In Behavior of Steel-Alumina Pairings under Lubricated Conditions“ |
Advanced Engineering Materials |
|
2017 |
255 |
|
DOI: 10.1002/adem.201700521 |
published |
|
E. Raoms-Moore |
A. Rosenkranz, L.F.Matamala, A. Videla, A. Duran, J. Ramos-Grez |
„Effect of Surface Etsching and Electrodeposition of Copper on Nitinol“ |
IOP Conference Series: Materials Science and Engineering |
258 |
2017 |
|
1-9 |
|
published |
|
F. Forouzan |
A. Guitar, E. Vuorinen, F. Mücklich |
„Effect of carbon partitioning, carbide precipitation and grain size on toughness of welded and quenched and partitioned (Q&P) low carbon steel “ |
Metals |
8 |
2018 |
|
|
DOI: 10.3390/met8100747 |
published |
|
A. Koblischka-Veneva |
M. R. Koblischka, C. L. Teng, M. P. Ryan, U. Hartmann, F. Mücklich |
„EBSD Analysis of Electroplated Magnetite Thin Films“ |
Journal of Magnetism and Magnetic Materials |
322 |
2010 |
9 |
1235-1238 |
presentation at JEMS’08 , September 14-19, 2008, Dublin, Ireland | DOI: 10.1016/j.jmmm.2009.03.028 | PDF verfügbar |
published |
|
D.F. Acevedo |
G. Martínez, J. T. Arana, E.I. Yslas, F. Mücklich, C. Barbero, H. J. Salavagione |
„Easy Way to Fabricate Nanostructures on a Reactive Polymer Surface“ |
Journal of Physical Chemistry B |
113 |
2009 |
44 |
14661-14666 |
DOI:10.1021/jp9074515 | PDF verfügbar |
published |
|
L. Reinert |
M. Varenberg, F. Mücklich, S. Suarez |
„Dry friction and wear of self-lubricating carbon nanotube-containing surfaces“ |
Wear |
406-407 |
2018 |
|
33-42 |
|
published |
|
L. Reinert |
M. Zeiger, S. Suárez, V. Presser, F. Mücklich |
„Dispersion analysis of carbon nanotubes, carbon onions and nanodiamonds for their application as reinforcement phase in nickel metal matrix composites “ |
RSC Advances |
|
2015 |
|
95149-95159 |
DOI: 10.1039/c5ra14310a |
published |
|
M. D´Alessandria |
A. Lasagni, F. Mücklich |
„Direct Micro-patterning of Aluminum Substrates via Laser Interference Metallurgy“ |
Applied Surface Science |
255 |
2008 |
5 |
3210-3216 |
DOI:10.1016/j.apsusc.2008.09.018 |
published |
|
M. Hans |
C. Gachot, F. Müller, F. Mücklich |
„Direct Laser Interference Structuring as a Tool to Gradually Tune the Wetting Response of Titanium and Polyimide Surfaces“ |
Advanced Engineering Materials |
11 |
2009 |
10 |
795-800 |
DOI:10.1002/adem.200900115 | PDF verfügbar |
published |
|
A. Rosenkranz |
M. Hans, C. Gachot, A. Thome, S. Bonk, F. Mücklich |
„Direct Laser Interference Patterning: Tailoring of Contact Area for Frictional and Antibacterial Properties“ |
Lubricants |
4 |
2016 |
2 |
1-15 |
|
published |
|
A.F. Lasagni |
C. Gachot, K.E.Trinh, M. Hans, A. Rosenkranz, T. Roch, S. Eckhardt. T. Kunze, M. Bieda, D. Günther, V. Lang, F. Mücklich |
„Direct laser interference patterning, 20 years of development: From the basics to industrial applications“ |
Proc. SPIE 10092, Laser-based Micro- and Nanoprocessing XI |
1009211 |
|
|
doi: 10.1117/12.2252 |
|
published |
|
M.F. Broglia |
S. Suarez, F. Soldera, F. Mücklich, C.A. Barbero, R. Bellingeri, F. Alustiza, D. Acevedo |
„Direct laser interference patterning of polystyrene films doped with azo dyes, using 355 nm laser light“ |
Applied Surface Science |
300 |
2014 |
|
86–90 |
DOI: 10.1016/j.apsusc.2014.02.008 |
published |
|
M. R. S. Castro |
A. Lasagni, H. K. Schmidt, F. Mücklich |
„Direct Laser Interference Patterning of Multi-Walled Carbon Nanotube-based Transparent Conductive Coatings“ |
Applied Surface Science |
254 |
2008 |
18 |
5874-5878 |
DOI: 10.1016/j.apsusc.2008.03.140 | PDF verfügbar |
published |
|
R. Schieber |
F. Lasserre, M. Hans, M. Fernández-Yagüe, M. Diaz-Ricart, G. Escolar, M. Ginebra, F. Mücklich, M. Pegueroles |
„Direct Laser Interference Patterning of CoCr Alloy Surfaces to Control Endothelial Cell and Platelet Response for Cardiovascular Applications“ |
Advanced Health Care Materials |
|
2017 |
|
|
DOI: 10.1002/adhm.201700327 |
published |
|
F. Mücklich |
J. Ohser, G. Schneider |
„Die Charakterisierung homogener polyedrischer Gefüge mit Hilfe des räumlichen Poisson-Voronoi-Mosaiks und der Vergleich zur DIN 50 601“ |
Zeitschrift für Metallkunde |
88 |
1997 |
1 |
27-32 |
|
published |
|
F. Mücklich |
G. Petzow |
„Development of Beryllium Single Crystal Material for Monochromator Applications“ |
Mineral Proc. and Extract. Met. Rev. |
13 |
1994 |
|
193-227 |
|
published |
|
J. Riedrich-Möller |
C. Arend, C. Pauly, F. Mücklich, M. Fischer, S. Gsell, M. Schreck, C. Becher |
„Deterministic coupling of a single silicon-vacancy color center to a photonic crystal cavity in diamond“ |
Nano Letters |
14 |
2014 |
9 |
5281–5287 |
DOI: 10.1021/nl502327b |
published |
|
F. Soldera |
A. Lasagni, F. Mücklich, T. Kaiser, K. Hrastnik |
„Determination of the Cathode Erosion and Temperature for the Phases of High Voltage Discharges using FEM Simulations“ |
Computational Materials Science |
32 |
2005 |
|
123-139 |
DOI: 10.1016/j.commatsci.2004.06.004 | PDF verfügbar |
published |
|
H.A. Gobran |
D. Heger, F. Mücklich |
„Determination of RuAl Phase Boundaries in Binary RuAl Phase Diagram at Room Temperature and 1200°C“ |
Zeitschrift für Metallkunde |
96 |
2005 |
7 |
792-798 |
|
published |
|
U. Scholz |
Z. S. Nikolic, F. Mücklich, G. Petzow |
„Determination and Modification of the Thermal Conditions in a Double Ellipsoid Mirror Furnace“ |
Journal of Crystal Growth |
169 |
1996 |
|
578-581 |
|
published |
|
J. García |
R. Pitonak, R. Weißenbacher, A. Köpf, F. Soldera, S. Suarez, F. Miguel, H. Pinto, A. Kostka, F. Mücklich |
„Design and Characterization of Novel Wear Resistant Multilayer CVD Coatings with Improved Adhesion Between Al2O3 and Ti(C,N)“ |
Advanced Engineering Materials |
12 |
2010 |
9 |
929-934 |
DOI: 10.1002/adem.201000130 | PDF verfügbar |
published |
|
E.A. Alvarez |
C.G. Oliver, F. Soldera, J.L. García |
„Densification and FIB, SEM, TEM Microstructures of WC Composites with Fe or Co Matrices“ |
Procedia Materials Science |
8 |
2015 |
|
406-413 |
|
published |
|
C.J.R. González Oliver |
F.C. Lovey, A. Caneiro, D.O. Russo, D.S. Rodríguez, F. Soldera, J. E. Fiscina, J. Ma. Rincón |
„Crystallization of iron phosphate glasses containing up to 19 wt.% UO2.67“ |
Journal of Non-Crystalline Solids |
356 |
2010 |
52 |
2986-2993 |
DOI:10.1016/j.jnoncrysol.2010.06.034 | PDF verfügbar |
published |
|
F. Mücklich |
J. Webel, H. Aboulfadl, N. Lindow, H.-C. Hege |
„Correlative Tomography - Extraction of Reliable Information with Adequate Resolution from mm Scale Down to Sub-nm Scale“ |
Microscopy and Microanalysis |
20 |
2014 |
|
838-839 |
DOI: http://dx.doi.org/10.1017/S1431927614005911 |
published |
|
Y. Hao |
F. Mücklich, G. Petzow |
„Correlation between the Dislocation Configuration and the Related Scattering Behaviour of hcp Single Crystals by Application of the Fourier Transformation Approach“ |
Computational Materials Science |
7 |
1996 |
|
167-172 |
|
published |
|
A. Rosenkranz |
B. Martin, S. Bettscheider, C. Gachot, H. Kliem, F. Mücklich |
„Correlation between solid–solid contact ratios and lubrication regimes measured by a refined electrical resistivity circuit“ |
Wear |
320 |
2014 |
1 |
51-61 |
DOI: 10.1016/j.wear.2014.08.018 |
published |
|
Y. Hao |
F. Mücklich, G. Petzow |
„Correlation between Scattering Behaviour of H.C.P. Single Crystals and Incorporated Dislocation Arrangement Quantified by the Fourier Transformation“ |
Physica Status Solidi A |
158 |
1996 |
9 |
9-17 |
|
published |
|
Y. Wang |
J. Ghanbaja, F. Soldera, P. Boulet, D. Horwat, F. Mücklich, J.F. Pierson |
„Controlling the preferred orientation in sputter-deposited Cu2O thin films: influence of the initial growth stage and homoepitaxial growth mechanism“ |
Acta Materialia |
76 |
2014 |
|
207-212 |
DOI: 10.1016/j.actamat.2014.05.008 |
published |
|
N. Prodanov |
C. Gachot, A. Rosenkranz, F. Mücklich, M.H. Müser |
„Contact mechanics of laser-textured surfaces: Correlating contact area and friction“ |
Tribology Letters |
50 |
2013 |
|
41-48 |
DOI: 10.1007/s11249-012-0064-z |
published |
|
J. Barrirero |
M. Engstler, N. Ghafoor, N. de Jonge, M. Odén, F. Mücklich |
„Comparison of segregations formed in unmodified and Sr-modified Al-Si alloys studied by atom probe tomography and transmission electron microscopy“ |
Journal of Alloys and Compounds |
611 |
2014 |
|
410-421 |
DOI: 10.1016/j.jallcom.2014.05.121 |
published |
|
C. Gachot |
R. Catrin, A. Lasagni, U. Schmid, F. Mücklich |
„Comparative Study of Grain Sizes and Orientation in Microstructured Au, Pt and W Thin Films Designed by Laser Interference Metallurgy“ |
Applied Surface Science |
255 |
2009 |
|
5626-5632 |
DOI:10.1016/j.apsusc.2008.10.032 | PDF verfügbar |
published |
|
K. W. Liu |
C. Gachot, P. Leibenguth, F. Mücklich |
„Combinatorial Experiment in Ni-Ti Thin Films by Laser Interference Structuring“ |
Applied Surface Science |
247 |
2005 |
|
550-555 |
DOI: 10.1016/j.apsusc.2005.01.123 | PDF verfügbar |
published |
|
J. Barrirero |
J. Li, M. Engstler, N. Ghafoor, P. Schumacher, M. Odén, F. Mücklich |
„Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys“ |
Scripta Materialia |
117 |
2016 |
|
16-19 |
DOI: 10.1016/j.scriptamat.2016.02.018 |
published |
|
D. Horwat |
D. I. Zakharov, J.-L. Endrino, F. Soldera, A. Anders, S. Migot, R. Karoum, P. Vernoux, J.-F. Pierson |
„Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition“ |
Surface and Coatings Technology |
205 |
2011 |
2 |
171-177 |
DOI: 10.1016/j.surfcoat.2010.12.021. | PDF verfügbar |
published |
|
J. J. Roa |
H. Aboulfadl, J. Barrirero, M. Turon-Vinas, F. Mücklich, M. Anglada |
„Chemical segregation in a 12Ce-ZrO2/3Y-ZrO2 cermanic composite“ |
Mater. Charact. |
132 |
2017 |
|
83-91 |
|
published |
|
E. Dalibón |
D. Heim, C. Forsich, A. Rosenkranz, M.A. Guitar |
„Characterization of thick and soft DLC coatings deposited on plasma nitrided austenitic stainless steel“ |
Diamond and Related Materials |
59 |
2015 |
|
73-79 |
doi: 10.1016/j.diamond.2015.09.010 |
published |
|
A. Hatton |
M. Engstler, P. Leibenguth, F. Mücklich |
„Characterization of Graphite Crystal Structure and Growth Mechanisms Using FIB and 3D Image Analysis“ |
Advanced Engineering Materials |
13 |
2011 |
3 |
136-144 |
DOI: 10.1002/adem.201000234 | PDF verfügbar |
published |
|
D. Ladutkin |
C. Bruch, C. Günther, H. Aboulfadl, F. Mücklich |
„Characterization of an Albite Inclusion Containing MgO by Atom Probe Tomography“ |
Practical Metallography |
50 |
2013 |
|
607-615 |
DOI: 10.3139/147.110262 |
published |
|
H. Aboulfadl |
I. Gallino, R. Busch, F. Mücklich |
„Atomic scale analysis of phase formation and diffusion kinetics in AG/Al multilayer thin films“ |
Applied Physics |
120 |
2016 |
|
pp. 195306 |
doi:10.1063/1.4968013 |
published |
|
I. El Azhari |
J. Barrirero, J. Garcia, F. Soldera, L. Llanes, F. Mücklich |
„Atom Probe Tomography investigations on grain boundary segregation in polycrystalline Ti(C,N) and Zr(C,N) CVD coatings“ |
Scripta Materialia |
162 |
2019 |
|
335-340 |
doi.org/10.1016/j.scriptamat.2018.11.041 |
published |
|
M. Hans |
F. Müller, S. Grandthyll, S. Hüfner, F. Mücklich |
„Anisotropic wetting of copper alloys induced by one-step laser micro-patterning“ |
Applied Surface Sience |
263 |
2012 |
|
416-422 |
DOI: 10.1016/j.apsusc.2012.09.071 | PDF verfügbar |
published |
|
A. Rosenkranz |
S. Fleischmann, C. Gachot, F. Mücklich |
„Anisotropic spreading behavior of PAO oil on laser-patterned stainless steel surfaces“ |
Advanced Engineering Materials |
17 |
2015 |
11 |
1645-1651 |
DOI: 10.1002/adem.201500115 |
published |
|
A. Koblischka-Veneva |
F. Mücklich, M. R. Koblischka, N. Hari Nabu, D.A. Cardwell, L. Shlyk, G. Krabbes |
„An Electron Backscatter Diffraction Investigation of Crystallographic Orientations of Embedded Nanoparticles within Melt-textured YBCO High Temperature Superconductors“ |
Superconductor Science and Technology |
19 |
2006 |
|
562-566 |
DOI: 10.1088/0953-2048/19/7/S27 | PDF verfügbar |
published |
|
A. Rosenkranz |
L. Reinert, C. Gachot, F. Mücklich |
„Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions“ |
Wear |
318 |
2014 |
1 |
49-61 |
DOI: 10.1016/j.wear.2014.06.016 |
published |
|
S.M. Azimi |
D. Britz, M. Engstler, M. Fritz, F. Mücklich |
„Advanced Steel Microstructural Classification by Deep Learning Methods“ |
Scientific Reports |
8 |
2018 |
1 |
2128 |
|
published |
|
A. Lasagni |
M. D´Alessandria, R. Giovanelli, F. Mücklich |
„Advanced Design of Periodical Architectures in Bulk Metals using Laser Interference Metallurgy“ |
Applied Surface Science |
254 |
2007 |
|
930-936 |
DOI: 10.1016/j.apsusc.2007.08.010 | PDF verfügbar |
published |
|
C. Gachot |
A. Rosenkranz, B. Wietbrock, G. Hirt, F. Mücklich |
„Advanced design of hierarchical topographies in metallic surfaces by combining micro-coining and laser interference patterning“ |
Advanced Engineering Materials |
15 |
2013 |
|
503-509 |
DOI: 10.1002/adem.201200295 |
published |
|
B. Raillard |
L. Gouton, E. Ramos-Moore, S. Grandthyll, F. Müller, F. Mücklich |
„Ablation effects of femtosecond laser functionalization on steel surfaces“ |
Surface and Coatings Technology |
207 |
2012 |
|
102-109 |
DOI: 10.1016/j.surfcoat.2012.06.023 | PDF verfügbar |
published |
|
E. Roitero |
F. Lassere, M. Anglada, F. Mücklich, E. Jiménez-Piqué |
„A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality“ |
Dental Materials |
33 |
2017 |
|
pp. e28-e38 |
|
published |
|
J. Webel |
J. Gola, D. Britz, F. Mücklich |
„A new analysis approach based on Haralick texture features for the characterization of microstructure on the example of low-alloy steels “ |
Materials Characterization |
144 |
2018 |
|
584-596 |
|
published |
|
J. Balach |
F. Miguel, F. Soldera, D. Acevedo, F. Mücklich, C. Barbero |
„A direct and quantitative image of the internal nanostructure of nonordered porous monolithic carbon using FIB nanotomography“ |
Journal of Microscopy |
246 |
2012 |
3 |
274-278 |
DOI: 10.1111/j.1365-2818.2012.03615.x | PDF Verfügbar |
published |
|
D. Britz |
J. Webel, J. Gola, F. Mücklich |
„A Correlative Approach to Capture and Quantify Substructures by Means of Image Registration“ |
Practical Metallography |
54 |
2017 |
10 |
685-696 |
|
published |
|
F. A. Lasagni |
A. Lasagni, I. Huertas-Olivares, C. Holazapfel, F. Mücklich |
„3D Nano-Characterisation of Materials by FIB-SEM/EDS Tomography“ |
IOP Conf. Series: Materials Science and Engineering |
7 |
2010 |
|
012016 |
DOI:10.1088/1757-899X/7/1/012016 | PDF verfügbar |
published |
|
F. Lasagni |
A. Lasagni, C. Holzapfel, M. Engstler, F. Mücklich |
„3D Microstructural Study of AlSi8Mg5 Alloy by FIB-Tomography“ |
Practical Metallography |
47 |
2010 |
9 |
487-499 |
DOI: 10.3139/147.110088 |
published |
|
T. Dahmen |
N. de Jonge, P. Trampert, M. Engstler, C. Pauly, F. Mücklich, P. Slusallek |
„"Smart Microscopy" Feature based adaptive ampling for Forcused Ion Beam Scanning Electron Microscopy“ |
Microscopy and Microanalysis |
22 |
2016 |
|
632 |
|
published |
|